Abstract:The traditional pre-treatment of cotton fabric hardly meets the requirement of low carbon emissions due to its large energy consumption and wastewater discharge. In this study, a low-temperature and near-neutral strategy was designed by establishing a tetraacetylethylenediamine (TAED)-activated sodium percarbonate (SPC) system. First, the effects of SPC concentration, temperature and duration on the whiteness index (WI) and capillary effect of cotton fabrics were investigated. Particularly, excess SPC's ability to create an additional bleaching effect was studied. The optimized activated pre-treatment was compared with the traditional pre-treatment in terms of the bleaching effect and energy consumption. Further, the degradation of morin, which is one of the natural pigments in cotton, was carried out in a homogeneous TAED/SPC system to reveal the bleaching mechanism. Lastly, the application performance of the treated cotton was evaluated by characterizing the dyeability, mechanical properties, morphology, etc. The research results showed that temperature had a significant influence on both the WI and capillary effect, followed by the SPC concentration and duration. The WI was positively correlated with the SPC concentration, but excess SPC could not produce an obvious additional effect. The WI of the fabric increased by 67.6% after the optimized activated bleaching using 10 mmol/L SPC and 15 mmol/L TAED at 70 °C for 30 min. Compared with the traditional process performed at 95 °C for 45 min, the activated process produced approximately 39.3% energy savings. Research on the bleaching mechanism indicated that the reactive species that participated in degrading the morin were the hydroxyl radical and superoxide radical, and the contribution degree of the former was larger than that of the latter. Two degradation components with molecular weights of 180 and 154 were detected using mass spectroscopy. Based on this, the bleaching mechanism of the TAED/SPC system was proposed. Moreover, the fabric after the activated pre-treatment had a suitable dyeability and strength, a lower wax residual and a smoother and cleaner fiber surface. The encouraging results showed that TAED/SPC is a promising bleaching system that is conducive to the sustainable advance of the textile industry.

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Modification on the Chemi-mechanical Pulping Property of Rice Straw with Alkali-urea System

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

High-Quality Natural Fibers from Cotton Stalk Bark via Limited Alkali Penetration and Simultaneous Accelerated Temperature Rise

Production of dissolving grade pulp from tobacco stalk through SO2-ethanol-water fractionation, alkaline extraction, and bleaching processes

Effect Of Different Degumming Methods Of Cotton Bast Fiber On Its Composition And Structure

Single-Stage Pulping of Sugarcane Bagasse with Peracetic Acid

Influence of Degumming Methods on Constituents and Structure of Cotton Bast Fibers

Pozone Technology to Bleach Pulp

PAMUK BİTKİSİNDEN ELDE EDİLEN SAK LİFLERİNİN TERBİYESİNİN OPTİMİZASYONU

Characterization of Pigmentation and Cellulose Synthesis in Colored Cotton Fibers

Delignification of Sugarcane Bagasse with Alkali and Peracetic Acid and Characterization of the Pulp

Energy-Saving One-Step Pre-Treatment Using an Activated Sodium Percarbonate System and Its Bleaching Mechanism for Cotton Fabric

Integrated enzymatic and chemical treatment for single-stage preparation of cotton fabrics

Research on the pretreatment of chroma in the wastewater of cotton pulp

Efficient Preparation of Anisotropic Cellulose Sponge from Cotton Stalks: An Excellent Material for Separation Applications

Utilizing peracetic acid as an eco-friendly bleaching agent: investigating whiteness levels of cellulose microfibers from corn husk waste

Effect of different bleaching reagents and process sequences on the properties of steam-exploded empty fruit bunch (EFB) fiber

Comparison of Sodium Hydroxide and Sodium Carbonate as Alkali Catalysts in Ethanol Organosolv Treatment of Cotton Stalks for the Release of Hydroxycinnamates