Abstract:Refining Kraft pulp into dissolving pulp preparation methods are generally has been limited by aggressive chemical input and overlook of xylan component valorization. This work demonstrated an integrated process of deep eutectic solvents (DESs) pretreatment followed by mechanical refining and enzymatic hydrolysis (DME) for the dissolving pulp preparation and the co-production of two xylo-oligosaccharides (XOSs). The technical feasibility of the DME process was assessed with typical bleached bamboo and poplar Kraft pulp. It was shown the employed aqueous alkaline DES consisting of choline hydroxide and urea (40% concentration) could initially purify cellulose while selectively extracting alkali-soluble XOS by the unique bonding behavior of DES. The resulting dissolving pulp showed considerably high cellulose content of 94.3% and 91.1% for bleached bamboo pulp and bleached poplar pulp respectively. The overall cascade process significantly improved cellulose reactivity and quality (α-cellulose > 90%, S10/S18 < 8%) which could meet the high criterion of commercial dissolving pulp while extracting 69.4% content of high-purity XOS. When 100 g bleached pulp was subjected to the technology route, over 80 g high cellulose yield was obtained for both substrates, while simultaneously producing the alkaline and water-soluble XOS (total approximately 10 g respectively). It was proposed that the strong hydrogen bonding accepting ability of the ChOH-Urea DES system could purify cellulose through XOS selective solubilization while swelling cellulose to ease the subsequent mechanical fibrillation. Then the mechanically treated cellulose with enhanced accessibility to xylanase provided an additional technique opportunity for further cellulose purification through facile enzymatic hydrolysis. Therefore, this proposed integrated technique could refine bleached Kraft pulp into dissolving pulp with enhanced cellulose reactivity while co-producing high-purity XOS product streams.

Production of dissolving grade pulp from tobacco stalk through SO2-ethanol-water fractionation, alkaline extraction, and bleaching processes

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

A study on modification of chemi-mechanical pulping property of wheat straw by pretreatment with ZnCl2aqueous solution

Mild three-stage alkali-oxygen treatment preserving the native macromolecular structure of lignin for effective disassembling of tobacco stalk

Sulfite Pretreatment Enhances Tobacco Stalk Deconstruction for Cellulose Saccharification and Lignin Pyrolysis

Complete conversion of bleached Kraft pulp into dissolving pulp and two xylo-oligosaccharides through a deep eutectic solvent assisted biorefinery

Preparation of Dissolving Pulp by Combined Mechanical and Deep Eutectic Solvent Treatment

Synthesis of levulinic acid from tobacco stalk via steam explosion and oxidation–hydrolysis route

A cascaded process to upgrade bleached bamboo pulp into dissolving pulp and arabinoxylan

StExCell: novel steam-explosion-based biorefinery concept for dissolving pulp production

One-Step Treatment for Upgrading Bleached Bamboo Pulp to Dissolving Pulp High Solvency in Green Alkali/Urea Aqueous Solution

Current status and future prospects of pretreatment for tobacco stalk lignocellulose

Evaluation of Xylooligosaccharide Production from Residual Hemicelluloses of Dissolving Pulp by Acid and Enzymatic Hydrolysis

Preparation of cellulose nano/microfibres with ultra-high aspect ratios from tobacco stem using soda-oxygen delignification and ultrasonication

Conversion of bleached soda bagasse paper-grade pulp to dissolving-grade pulp using different hemicelluloses removing post-treatments with emphasis on IONCELL-P process

Cellulose and lignin purified from Metroxylon sagu palm fronds by a new technology with 2-methylanthraquinone cooking and peroxymonosulfuric acid bleaching

Isolation and Fractionation of the Tobacco Stalk Lignin for Customized Value-Added Utilization

Effects of Caustic Extraction on Properties of Viscose Grade Dissolving Pulp