Abstract:Abstract Several reagents were tested as possible future pre-treatments to hydrogen peroxide bleaching of discoloured paper with the goal of minimizing the degrading effect of hydrogen peroxide on cellulose. Two historic rag papers were used as testing substrate, one with high, the other with low levels of iron ion content. The two papers underwent the following test protocol: all samples were rinsed in deionized water for ten minutes. Samples were then divided to undergo seven different bleaching pre-treatments: (1) deacidification with calcium hydroxide solution at pH 9; (2) deacidification with magnesium hydrogen carbonate solution at pH 7.5; (3) hydrochloric acid (HCl, 0.1 M, pH 1) followed by deacidification with calcium hydroxide; (4) calcium phytate (1.75 mmol/L, pH 5.3) followed by deacidification with calcium hydroxide; (5) magnesium phytate (pH 6.5) followed by deacidification with magnesium hydrogen carbonate solution; (6) and (7) the chelating agent diethylene-triamine-pentaacetic acid (DTPA, 0.005 mol/L, pH 3) followed by deacidification either with calcium hydroxide or magnesium hydrogen carbonate. All samples were immersed in 3% hydrogen peroxide baths (pH 9, adjusted with calcium hydroxide). They were dynamically aged in a customized setup in a stack (20°C-80°C, three hour intervals, six weeks). The samples underwent analyses before treatment, after bleaching and after accelerated ageing. The molecular weight and carbonyl group content of the cellulose were determined with fluorescence labelling in combination with gel permeation chromatography (GPC-MALLS). Brightness reversion of the papers was determined by colourimetry. The iron content level was determined by inductively coupled plasma-mass spectrometry (ICP-MS) before and after treatment. The paper with low iron ion content did not benefit measurably from the pre-treatments, whereas the paper with high iron content benefited from some of the pre-treatments, as determined after accelerated aging. The least increase in carbonyl group content after accelerated ageing was achieved with calcium phytate (4); followed by magnesium phytate (5); and DTPA with magnesium hydrogen carbonate deacidification (7). The highest carbonyl group increase was caused by the calcium hydroxide pre-treatment (1). The Mw was best with the phytate-treated samples (4 and 5), followed by DTPA with magnesium hydrogen carbonate deacidification (7) and hydrochloric acid (3); the calcium-hydroxide deacidified sample showed the greatest Mw loss (1). All of tested iron removal and complexation treatments (3-7) diminished brightness reversion. DTPA (6 and 7) and hydrochloric acid (3) diminished the iron ion content of the high-iron-content paper by 30%. In sum, the tests 3-7 showed distinct benefits over deacidification alone (1 and 2) and may become viable as pre-treatment agents before hydrogen peroxide bleaching after further testing on object materials.

Reducing the Risks of Hydrogen Peroxide Bleaching in Presence of Iron Ions in Paper

Estimation of hydrogen peroxide effectivity during bleaching using the Kappa number

Oxidative Degradation Mechanism and Antidegradation Strategy of Paper-Based Relics with Transition Metal Pigments: from the Cellobiose Model to Cellulose Paper

The influence of transition metal ions on the oxidation of kraft pulp using hydrogen peroxide under mildly acidic conditions

Restore lost properties of solidified leaves with hydroxypropyl cellulose

Regioselective oxidation of recycled cellulosic fibres for enhancement in the mechanical strength of resulting papers

Environmentally Friendly Bleaching Process of the Cellulose Fibres Materials Using Ozone and Hydrogen Peroxide in the Gas Phase

Hydroxypropyltrimethyl Ammonium Chloride Chitosan Nanoparticles Coatings for Reinforcement and Concomitant Inhibition of Anionic Water-Sensitive Dyes Migration on Fragile Paper Documents

Research on Deacidification and Reinforcement of Archives Paper with Calcium Carbonate Nanoparticles/Modified Hydroxypropyl Cellulose

Surface hydrophobization of pulp fibers in paper sheets via gas phase reactions

Application of Ethylene Oxide Gas and Argon Gas Mixture System Method for Scale Deacidification of Cellulose-Based Cultural Heritage Collections

Multi-Functional Repair and Long-Term Preservation of Paper Relics by Nano-MgO with Aminosilaned Bacterial Cellulose

Pretreatment to Improve Adsorption and Effectiveness of Wet End Chemicals for A Bleached Chemithermomechanical Pulp

Development of Mg-Al LDH and LDO As Novel Protective Materials for Deacidification of Paper-Based Relics

Investigation into the Synergistic Effect Between Uv/Ozone Exposure and Peroxide Pad-Batch Bleaching on the Printability of Wool

Decolorization kinetics and mechanisms of commercial dyes by H2O2/iron powder system

Ethylene Oxide for the Mass Deacidification of Paper Relics

Exploring the intensifying effect of periodate/hydroxylamine oxidation process for the effective mineralization of textile dyes effluents with consideration of environmental matrices

In Vitro Investigation of the Effects of Various Reducing Agents on Dentin Treated with Hydrogen Peroxide

Chemical oxygen demand and tannin/lignin removal from paper mill wastewater by electrocoagulation combined with peroxide and hypochlorite treatments

Holocellulose fibers and paper from birch based on peracetic acid treatment