Abstract:Cellulosic paper products based on sustainable resources are of interest as a replacement for petroleum-based plastics, for example, in packaging applications. Improvements are desired for mechanical performance, recyclability, and possibilities to shape fiber networks into complex geometries. Commercial bleached wood fibers from the kraft process have insufficient mechanical properties for many applications, even with beating and additives. In addition, mechanical properties of paper structures are significantly reduced after recycling. Here, recycling and 3D shaping performance of holocellulose fibers are compared with kraft fibers and investigated in the context of wood fiber tailoring for eco-friendly materials. Holocellulose fibers from wood are prepared by mild peracetic acid delignification for well-preserved nanostructures and hemicellulose content (28 wt %). Paper structures of about 50% porosity are prepared from both types of fibers by vacuum filtration and drying. Mechanical tensile tests are performed, and fracture surfaces are investigated. The effects of recycling on the fiber structure (chemical composition, morphology, and crystallite size in fibers) and mechanical paper properties are reported. 3D-shaping performance is studied using compression molding with a double-curved mold. Holocellulose paper structures showed much better mechanical properties than kraft fiber paper (Young's modulus 10 GPa, ultimate tensile strength 100 MPa), as well as better recycling performance (only 26% decrease in strength after 5 cycles) and 3D formability. The well-preserved cellulose and hemicellulose components are important, as well as the homogeneity of the fiber cell wall nanostructure. This preserves the intrinsic mechanical properties of fibers, reduces hornification effects, and provides strong interfiber adhesion. Furthermore, the water-soluble hemicelluloses present at the cellulose-cellulose interface are able to facilitate recycling and 3D forming.

Holocellulose fibers and paper from birch based on peracetic acid treatment

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Effects of pretreatment on the recycling properties of birch holocellulose paper

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Recycling Without Fiber Degradation—Strong Paper Structures for 3D Forming Based on Nanostructurally Tailored Wood Holocellulose Fibers

Balancing the effect of pretreatment severity on hemicellulose extraction and pulping performance during auto-hydrolysis prior to kraft pulping of acacia wood

Combining phosphotungstic acid pretreatment with mild alkaline extraction for selective separation of hemicelluloses from hardwood kraft pulp

Pressure-assisted hydrothermal pretreatment for biorefinery to enhance pulp production

Effect of Hemicellulose on the Wet Tensile Strength of Kozo Paper

Single Step PAA Delignification of Wood Chips for High-Performance Holocellulose Fibers

Structural, morphological, and thermal properties of cellulose nanofibers extracted from waste paper

Micro- and nano-hybrid cellulose fibers prepared by straightforward and high-efficiency hot water soaking-assisted colloid grinding for high-performance cellulose paper

Cellulose nanofibrils manufactured by various methods with application as paper strength additives

Potential of acetosolv pulping as an environment-friendly pulping method for spruce, beech, miscanthus, and characterization of handsheets

Preparation and application of nanocellulose from non-wood plants to improve the quality of paper and cardboard

Efficient preparation of high-purity cellulose from moso bamboo by p-toluenesulfonic acid pretreatment

Conversion of bleached soda bagasse paper-grade pulp to dissolving-grade pulp using different hemicelluloses removing post-treatments with emphasis on IONCELL-P process

Cellulose nanofiber extraction from unbleached kraft pulp for paper strengthening

Properties of Xanthoceras Sorbifolia Husk Fibers with Chemical Treatment for Applications in Polymer Composites