Abstract:Abstract Several reagents were tested as possible future pre-treatments to hydrogen peroxide bleaching of discoloured paper with the goal of minimizing the degrading effect of hydrogen peroxide on cellulose. Two historic rag papers were used as testing substrate, one with high, the other with low levels of iron ion content. The two papers underwent the following test protocol: all samples were rinsed in deionized water for ten minutes. Samples were then divided to undergo seven different bleaching pre-treatments: (1) deacidification with calcium hydroxide solution at pH 9; (2) deacidification with magnesium hydrogen carbonate solution at pH 7.5; (3) hydrochloric acid (HCl, 0.1 M, pH 1) followed by deacidification with calcium hydroxide; (4) calcium phytate (1.75 mmol/L, pH 5.3) followed by deacidification with calcium hydroxide; (5) magnesium phytate (pH 6.5) followed by deacidification with magnesium hydrogen carbonate solution; (6) and (7) the chelating agent diethylene-triamine-pentaacetic acid (DTPA, 0.005 mol/L, pH 3) followed by deacidification either with calcium hydroxide or magnesium hydrogen carbonate. All samples were immersed in 3% hydrogen peroxide baths (pH 9, adjusted with calcium hydroxide). They were dynamically aged in a customized setup in a stack (20°C-80°C, three hour intervals, six weeks). The samples underwent analyses before treatment, after bleaching and after accelerated ageing. The molecular weight and carbonyl group content of the cellulose were determined with fluorescence labelling in combination with gel permeation chromatography (GPC-MALLS). Brightness reversion of the papers was determined by colourimetry. The iron content level was determined by inductively coupled plasma-mass spectrometry (ICP-MS) before and after treatment. The paper with low iron ion content did not benefit measurably from the pre-treatments, whereas the paper with high iron content benefited from some of the pre-treatments, as determined after accelerated aging. The least increase in carbonyl group content after accelerated ageing was achieved with calcium phytate (4); followed by magnesium phytate (5); and DTPA with magnesium hydrogen carbonate deacidification (7). The highest carbonyl group increase was caused by the calcium hydroxide pre-treatment (1). The Mw was best with the phytate-treated samples (4 and 5), followed by DTPA with magnesium hydrogen carbonate deacidification (7) and hydrochloric acid (3); the calcium-hydroxide deacidified sample showed the greatest Mw loss (1). All of tested iron removal and complexation treatments (3-7) diminished brightness reversion. DTPA (6 and 7) and hydrochloric acid (3) diminished the iron ion content of the high-iron-content paper by 30%. In sum, the tests 3-7 showed distinct benefits over deacidification alone (1 and 2) and may become viable as pre-treatment agents before hydrogen peroxide bleaching after further testing on object materials.

Restore lost properties of solidified leaves with hydroxypropyl cellulose

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Comparison of the internal functionalization and surface modification methods of chemi-mechanical pulp handsheets using nanocellulose, chitosan, and DTPA

Creating bulky papers with hydroxypropyl methylcellulose

Multi-Functional Repair and Long-Term Preservation of Paper Relics by Nano-MgO with Aminosilaned Bacterial Cellulose

Enhancing the functional properties and performance of paper via cellulose nanocrystals and funori loaded onto ZnO NPs

Research on Deacidification and Reinforcement of Archives Paper with Calcium Carbonate Nanoparticles/Modified Hydroxypropyl Cellulose

EVALUATION OF STARCH AND CELLULOSE BASED CONSOLIDATION MATERIALS ON THE MECHANICAL PROPERTIES OF PAPYRUS

Potential effects of nano-cellulose and nano-silica/polyvinyl alcohol nanocomposites in the strengthening of dyed paper manuscripts with madder: an experimental study

Use of carboxymethyl cellulose, Klucel G, gum Arabic and zinc oxide nanoparticles nanocomposite as strength agents for inked papyrus

Hydroxypropyltrimethyl Ammonium Chloride Chitosan Nanoparticles Coatings for Reinforcement and Concomitant Inhibition of Anionic Water-Sensitive Dyes Migration on Fragile Paper Documents

Consolidation materials used with illuminated and non-illuminated paper manuscripts and historical leather bindings: a review

Preparation and application in the paper protection of carboxymethyl cellulose grafted with β-cyclodextrin

Reversible Deacidification and Preventive Conservation of Paper-Based Cultural Relics by Mineralized Bacterial Cellulose

Preparation and Application of Polyurethane Coating Material Based on Epoxycyclohexane-Epoxychloropropane Protective for Paper

Reducing the Risks of Hydrogen Peroxide Bleaching in Presence of Iron Ions in Paper

Preparation and application of modified carboxymethyl cellulose Si/polyacrylate protective coating material for paper relics

Quick and efficient flame-retardant, antibacterial and antifungal treatment for high-performance cellulose paper

Research on the Structure and Properties of Traditional Handmade Bamboo Paper During the Aging Process

Effects of pretreatment on the recycling properties of birch holocellulose paper