Abstract:Adaptive materials active in the thermal infrared (IR) region have recently attracted intense research interest as they are suitable for adaptive IR camouflage applications, although significant challenges remain. Under external thermal stimuli, vanadium dioxide (VO2) thin films exhibit a reversible metal-insulator transition (MIT) from an IR transparent state to a reflecting state with heating. An alternative route is proposed for depositing thermochromic VO2(M) thin films on quartz substrates via the transformation of metastable VO2(B). A silicone elastomer sheet with high absorption in the IR region and high thermal conductivity was adhered to the back of a VO2/quartz structure to improve its thermochromic properties in the mid-wavelength (MWIR; 3-5 mu m) and long wavelength (LWIR; 8-14 mu m) thermal atmospheric windows. The emissivity of the VO2(M)/quartz/silicone structure could change by 0.21 and 0.49 across MIT in the MWIR and LWIR ranges, respectively. This VO2/quartz/silicone structure showed IR chameleon-like behavior in the MWIR and LWIR atmospheric windows, respectively. When heated above the MIT temperature, the structure autonomously lowers its IR radiation intensity to appear to be at the same or even lower temperature on IR cameras. When the real temperature (T-r) of the object is 95 degrees C, the apparent temperature (T-a) on the MWIR camera is 51.9 degrees C close to the T. of 51.8 C at T-r = 65 degrees C; in the LWIR band, T-a is merely 43.8 degrees C when Tr is 90 degrees C, close to the T-a of 42.1 degrees C at T-r = 50 degrees C and even cooler than the T. of 49.3 degrees C at Tr = 60 degrees C. These exciting results provide new opportunities for adaptive IR camouflage of military objects with dynamical temperature change and IR exposure for cheating IR cameras.

Effects of physical forms of Mg/teflon/viton decoys on infrared radiation characteristics

Effects of Magnesium Powder on the Radiation Characteristics of Mtv Foil Infrared Decoys

Effects of Mg Al Alloy Powder on the Combustion and Infrared Emission Characteristics of the Mg Al PTFE Viton Composition

The Effects of Irradiation Cross-Linking on the Thermal Degradation and Flame-Retardant Properties of the Hdpe/Eva/Magnesium Hydroxide Composites

Research on Radiation Characteristic of Infrared Decoy Based on DPM

Theoretical Studies of the Passive Decoy to the Infrared Characteristics of Metal Constructions

Effect of thermite on the infrared radiation performance of Mg4Al3/PTFE/Viton agents

Theoretical Analysis of the Surface Temperature Regulation of an Infrared False Target Subjected to Periodical Ambient Conditions

Effectsof Equivalent Diameter on Verticalpmmacombustion in Natural Convection Environment

Effects of flame temperature and radiation properties on infrared light field imaging

Effects of Overlap Length on Flammability and Fire Hazard of Vertical Polymethyl Methacrylate (PMMA) Plate Array

Thermal phenomena and size effects of Mg powder in combustion process

Radiometer Effectiveness in Real Cases for Disclosing Stealth

Optimization Design of Thermal Conduction Enhanced PCM Plates for Simulating the Infrared Signature of Steel Plate

Experimental study on fire behaviors of external thermal insulation composite system under vertical radiation

Infrared Chameleon-Like Behavior from VO2(M) Thin Films Prepared by Transformation of Metastable VO2(B) for Adaptive Camouflage in Both Thermal Atmospheric Windows

Temperature-insensitive and enhanced microwave absorption of TiB2/Al2O3/MgAl2O4 composites: Design, fabrication, and characterization

EXPERIMENTAL STUDY ON THE FACTORS AFFECTING THE INSULATION PERFORMANCE OF FLAME-RETARDANT MULTILAYER INSULATION MATERIALS

Effect of Poly(Vinylidene Difluoride) Content on Thermal Reaction and Combustion Performance of MnO2-Al Nanothermite

Technology development and performance study of various thermoluminescent detectors

A study of flames with millimeter-wave radiation