Abstract:Abstract Thermal barrier coatings are widely used in gas turbines to protect the gas turbine metal components against very high combustion product temperature. To improve energy efficiency, higher combustion temperatures are needed. A limiting factor at present is the stability under extreme and prolonged heating of thermal barrier coatings. The coatings are typically made by the air plasma sprayed process in which fine particles of yttria-stabilized zirconia (YSZ) are melted or partially melted and ejected from plasma jet at high speed onto the bond coated substrate metal. With increasing combustion temperature and pressure in the modern gas turbine engines radiative heat transfer is becoming an important portion of the overall heat transfer in the thermal barrier coating. This study has demonstrated that the commonly used Kubelka-Munk method in the radiative property reduction from the measured transmittance and reflectance spectra of YSZ coatings will incur inaccurate result when the coating optical thickness is not sufficiently large. An alternative method — the discrete ordinates method with the asymmetric spherical ring angular quadrature — is used instead. The absorption and scattering coefficients of air plasma sprayed YSZ films are determined over the wavelength range from 1 to 2.6 μm at room temperature. Over this near infrared wavelength range, the scattering coefficient decreases with the increasing wavelength and the absorption coefficient is very small overall. The pore size distributions before and after the 50-hr temperature gradient, thermal cycling are compared. The sintering effect as well as the crack growth will impact the coating radiative properties. These results point to a clear need for better understanding of the radiative heat transfer process, which includes the microstructure-property relationship, progressive changes of the radiative properties with the operation condition and time.

Radiation heating tests to evaluate low-emissivity porous ceramics coatings for stand-off thermal protection systems

Radiative Thermal Coats for Passive Temperature Management

Novel Low Thermal Conductivity Ceramic Materials for Thermal Barrier Coatings

Near Infrared Radiative Properties of Thermal Barrier Coatings

Evaluation of Reusable Thermal Protection System Materials Using a High-Velocity Oxygen Fuel Torch

Microstructure and thermal behaviour of plasma sprayed zirconia/alumina composite coating

Design and Heat Transfer Analysis of a Compound Multi-Layer Insulations for Use in High Temperature Cylinder Thermal Protection Systems

Lightweight porous silica-alumina ceramics with ultra-low thermal conductivity

Repressing High‐temperature Radiative Heat Transfer in Thermal Barrier Coatings

Formation of high heat resistant coatings by using gas tunnel type plasma spraying

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance

Effective Blocking of Radiative Thermal Conductivity in La2Zr2O7/LaPO4 Composites for High Temperature Thermal Insulation Applications

High Temperature Thermal Physical Properties of High-Alumina Fibrous Insulation

Heat radiation mitigation in rare-earth pyrosilicate composites: A first principles investigation of refractive index mismatch

Oxy-Butane Ablation Testing of Thermal Protection Systems Based on Nanomodified Phenolic Resin Matrix Materials

Effective thermal conductivity and heat transfer characteristics of a series of ceramic TPMS lattice structure

Radiation Characteristics of High-Temperature Translucent Coatings

Experimental and numerical research on high‐temperature thermal insulation performance of lightweight porous ceramic/nanomaterial composite structure

Thermo-mechanical characterization of carbon-based ceramic foams for high temperature space application