Abstract:Recently, efficient thick-film polymer solar cells (PSCs) were reported to be promising candidates for large-area module device fabrication because of their potential compatibility with roll to roll processing technique. Nevertheless, most of thick-film PSCs with high power conversion efficiencies (PCEs) were fabricated under high temperature (over 100 degrees C, namely "Hot-Processing"), which restricts their potential commercialization application. Herein, a new pathway was developed to make high performance thick-film PSCs under a mild condition without hot-processing. It was found that the ternary strategy can efficiently tune the processing conditions of thick film PSCs due to the decrease of polymer aggregation intensity. Consequently, high-efficiency thick-film ternary PSCs (10.59%) without hot-processing are designed and fabricated by introducing the nematic liquidcrystalline small molecule (benzodithiophene terthiophene rhodanine, BTR) into fluorinated benzothiadiazolebased polymer (PffBT4T-2OD): fullerene host blend. The morphology studies reveal that the incorporation of BTR has a similar effect as hot-processing on the blend films, resulting in a much improved nano-scale phase separation. It was also demonstrated that the addition of BTR is beneficial for improving light harvesting, charge separation, transport and extraction of the resulting devices. Moreover, this ternary strategy shows a well general applicability for other systems that need hot-processing. Such as for naphthobisthiadiazole-based polymer PNTT, the optimized ternary device without hot-processing obtained an improved performance with a PCE of 11.44%, which is one of the highest-efficiency thick-film PSCs reported to date. Therefore, our results provide a facile approach to fabricate the high performance PSCs with thick-active layer at a lower temperature instead of hot-processing and may meet the needs of future roll-to-roll production of PSCs.

Highly Efficient and Thickness-Tolerable Bulk Heterojunction Polymer Solar Cells Based on P3HT Donor and a Low-Bandgap Non-Fullerene Acceptor

Mapping Nonfullerene Acceptors with a Novel Wide Bandgap Polymer for High Performance Polymer Solar Cells

High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area

High‐Efficiency P3HT‐Based All‐Polymer Solar Cells with a Thermodynamically Miscible Polymer Acceptor

High‐Performance As‐Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency

A Non-Fullerene Acceptor Enables Efficient P3HT-based Organic Solar Cells with Small Voltage Loss and Thickness Insensitivity

Synthesis And Photovoltaic Properties From Inverted Geometry Cells And Roll-To-Roll Coated Large Area Cells From Dithienopyrrole-Based Donor-Acceptor Polymers

High‐Performance Thick‐Film All‐Polymer Solar Cells Created Via Ternary Blending of a Novel Wide‐Bandgap Electron‐Donating Copolymer

Enhancing the Performance of Polymer Solar Cells by Using Donor Polymers Carrying Discretely Distributed Side Chains.

Highly Efficient Near-Infrared and Semitransparent Polymer Solar Cells Based on an Ultra-Narrow Bandgap Nonfullerene Acceptor

A Highly Crystalline Wide-Band-Gap Conjugated Polymer Toward High-Performance As-Cast Nonfullerene Polymer Solar Cells

Synergic Interface and Optical Engineering for High‐Performance Semitransparent Polymer Solar Cells

Efficient and thermally stable all-polymer solar cells based on a fluorinated wide-bandgap polymer donor with high crystallinity

8.30% Efficiency P3HT-based All-Polymer Solar Cells Enabled by a Miscible Polymer Acceptor with High Energy Levels and Efficient Electron Transport

14.4% efficiency all-polymer solar cell with broad absorption and low energy loss enabled by a novel polymer acceptor

Low Temperature Processed High-Performance Thick Film Ternary Polymer Solar Cell with Enhanced Stability

High-Performance Non-Fullerene Polymer Solar Cells Based on Fluorine Substituted Wide Bandgap Copolymers Without Extra Treatments

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Bulk heterojunction perovskite solar cells incorporated with p-type low optical gap conjugated polymers

Toward Efficient Polymer Solar Cells with Thick Bulk Heterojunction by Introducing Iridium Complex As an Aggregation Reshaping Auxiliary

17.1 %-Efficient Eco-Compatible Organic Solar Cells From A Dissymmetric 3d Network Acceptor