Abstract:The diluted layer‐by‐layer (N‐LBL) strategy is employed to fabricate all‐polymer solar cells (all‐PSCs). Such film‐forming strategy combined the advantage of traditional bulk‐heterojunction and LBL methods, and thus exhibited suitable donor–acceptor interfaces and optimal photon utilization behaviors. Consequently, a high short‐circuit current density over 26 mA cm−2 and promising power conversion efficiencies of 18.33% are realized for N‐LBL prepared all‐PSCs. Disordered polymer chain entanglements within all‐polymer blends limit the formation of optimal donor–acceptor phase separation, and thus the performance of all‐polymer organic solar cells (all‐PSCs). Considering the challenge and importance of morphology regulation in all‐PSCs, a diluted layer‐by‐layer (N‐LBL) strategy is thereby adopted to fine‐tuning the properties of all‐polymer blends. When comparing the traditional PM6:PY‐IT based bulk‐heterojunction (BHJ) film and PM6/PY‐IT layer‐by‐layer (LBL) film, the N‐LBL film, which is prepared from diluted PM6 (with 3% PY‐IT) bottom layer and diluted PY‐IT (with 6% PM6) top layer, displayed a clearer bi‐continuous fibrillar network and a higher exciton generation process. Benefiting from these unique characters, the all‐PSC consisting the N‐LBL active layer exhibited a short‐circuit current density over 26 mA cm−2 and a power conversion efficiency (PCE) of 18.33%, which are both higher than those of BHJ (16.88%) and LBL (17.13%) devices. Moreover, the universality of the dilution strategy in other all‐polymer blends (PM6 and PY‐DT, PM6 and PY‐FT‐o) is also demonstrated with unanimously improved device performance. This work underscores the effectiveness of the diluted layer‐by‐layer method in tuning the morphologies and charge dynamics for high‐performance all‐PSCs.

Layer‐by‐Layer Solution‐Processed Low‐Bandgap Polymer‐PC61BM Solar Cells with High Efficiency

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

High Efficiency Layer‐by‐Layer All‐Polymer Solar Cell Enabled by Bottom‐Layer Optimization

Bulk Heterojunction or Layer‐by‐Layer Structure PM6:L8‐BO Based Polymer Solar Cells Exhibiting an Efficiency of 17.84 % or 18.43 %

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

Highly Flexible All‐Polymer Solar Cells Processed Without Post‐Treatment Achieving 13.56% Efficiency

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency

A PCBM Electron Transport Layer Containing Small Amounts of Dual Polymer Additives That Enables Enhanced Perovskite Solar Cell Performance.

High‐Performance All‐Polymer Solar Cells with a Pseudo‐Bilayer Configuration Enabled by a Stepwise Optimization Strategy

Over 18.1% Efficiency of Layer-by-Layer Polymer Solar Cells by Enhancing Exciton Utilization near the ITO Electrode

Highly Efficient Solar Cells Based on the Copolymer of Benzodithiophene and Thienopyrroledione with Solvent Annealing

Nonhalogenated‐Solvent‐Processed High‐Performance All‐Polymer Solar Cell with Efficiency over 14%

Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy

Layer-by-Layer-Processed All-Polymer Solar Cells with Enhanced Performance Enabled by Regulating the Microstructure of Upper Layer

Over 18.2% efficiency of layer-by-layer all-polymer solar cells enabled by homoleptic iridium(III) carbene complex as solid additive

Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

High-Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping