Abstract:A 0.1-5.0 GHz flexible software-defined radio (SDR) receiver with digitally assisted calibration is presented, employing a zero-IF/low-IF reconfigurable architecture for both wideband and narrowband applications. The receiver composes of a main-path based on a current-mode mixer for low noise, a high linearity sub-path based on a voltage-mode passive mixer for out-of-band rejection, and a harmonic rejection (HR) path with vector gain calibration. A dual feedback LNA with "8" shape nested inductor structure, a cascode inverter-based TCA with miller feedback compensation, and a class-AB full differential Op-Amp with Miller feed-forward compensation and QFG technique are proposed. Digitally assisted calibration methods for HR, IIP2 and image rejection (IR) are presented to maintain high performance over PVT variations. The presented receiver is implemented in 65 nm CMOS with 5.4 mm(2) core area, consuming 9.6-47.4 mA current under 1.2 V supply. The receiver main path is measured with +5 dB m/+5dBm IB-IIP3/OB-IIP3 and +61dBm IIP2. The sub-path achieves +10 dB m/+18dBm IB-IIP3/OB-IIP3 and +62dBm IIP2, as well as 10 dB RF filtering rejection at 10 MHz offset. The HR-path reaches +13 dB m/+14dBm IB-IIP3/OB-IIP3 and 62/66 dB 3rd/5th-order harmonic rejection with 30-40 dB improvement by the calibration. The measured sensitivity satisfies the requirements of DVB-H, LTE, 802.11 g, and ZigBee.

-80dBm similar to 0dBm Dynamic Range, 30mV/dB Detection Sensitivity Piecewise RSSI for SDR/CR Receivers

−80dBm∼0dBm dynamic range, 30mV/dB detection sensitivity piecewise RSSI for SDR/CR receivers

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A 0.5-8Ghz Reconfigurable CMOS RF Receiver Front-end for CR and DPA Applications

Implementation of a New S-Band Micro-Transponder Based on Software Defined Radio

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

A 1.2V CMOS RSSI with 500MHz bandwidth and 90dB dynamic range

A 0.1–4 GHz SDR receiver with reconfigurable 10–100 MHz signal bandwidth in 65 nm CMOS

A 434/868 Mhz Cmos Low-If Receiver with I/Q Imbalance Calibration for Srds Application

An LP/CBP reconfigurable analog baseband circuit for software-defined radio receivers in 65 nm CMOS.

A 1.2V 0.1&#x2013;3ghz Software-Defined Radio Receiver Front-End in 130nm CMOS

A 0.1–5.0 GHz Flexible SDR Receiver with Digitally Assisted Calibration in 65 Nm CMOS

A 0.1&#x2013;5ghz SDR Transmitter with Dual-Mode Power Amplifier and Digital-Assisted I/Q Imbalance Calibration in 65nm CMOS

High-Sensitivity Software-Configurable 5.8-Ghz Radar Sensor Receiver Chip In 0.13-Mu M Cmos For Noncontact Vital Sign Detection

A 0.1–5ghz Flexible SDR Receiver in 65nm CMOS

A 0.1-5.0 GHz SDR Transmitter with Current-Mode Power-Mixer and Self-Calibration Scheme in 65 Nm CMOS

A wide band CMOS radio frequency RMS power detector with 42-dB dynamic range