Abstract:Finite element analysis is extensively used in the design of rubber products. Rubber products can suffer from large amounts of distortion under working conditions as they are nonlinearly elastic, isotropic, and incompressible materials. Working conditions can vary over a large distortion range, and relate directly to different distortion modes. Hyperelastic material models can describe the observed material behaviour. The goal of this investigation was to understand the stress and relegation fields around the tips of cracks in nearly incompressible, isotropic, hyperelastic accouterments, to directly reveal the uniaxial stress–strain relationship of hyperelastic soft accouterments. Numerical and factual trials showed that measurements of the stress–strain relationship could duly estimate values of nonlinear strain and stress for the neo-Hookean, Yeoh, and Arruda–Boyce hyperelastic material models. Numerical models were constructed using the finite element method. It was found that results concerning strains of 0–20% yielded curvatures that were nearly identical for both the neo-Hookean, and Arruda–Boyce models. We could also see that from the beginning of the test (0–5% strain), the curves produced from our experimental results, alongside those of the neo-Hookean and Arruda–Boyce models were identical. However, the experiment’s curves, alongside those of the Yeoh model, converged at a certain point (30% strain for Pieces No. 1 and 2, and 32% for Piece No. 3). The results showed that these finite element simulations were qualitatively in agreement with the actual experiments. We could also see that the Yeoh models performed better than the neo-Hookean model, and that the neo-Hookean model performed better than the Arruda–Boyce model.

The Selection Strategy Of The Rubber Material Constitutive Relations In Finite Element Analysis

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation

A Nonlinear Hyper-Viscoelastic Constitutive Model for Rubber Material with Finite Strain

A novel viscoelastroplastic constitutive model of rubber materials and parameter identification

The Uniaxial Stress–Strain Relationship of Hyperelastic Material Models of Rubber Cracks in the Platens of Papermaking Machines Based on Nonlinear Strain and Stress Measurements with the Finite Element Method

Hyperelastic Behavior of Two Rubber Materials under Quasistatic and Dynamic Compressive Loadings - Testing, Modeling and Application

Application of Hyperelastic Constitutive Models in Finite Element Analysis on Tires

Theoretical Models for Stress-Strain Curves of Elastomer Materials

A Study on the Effects of Hyperelastic Constitutive Models on the Static Characteristic Prediction of Rubber Isolator

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

The Study on Rubber’s Constitutive Model about Parameters Identification and the Effect of Fitting Error

A Viscoelastic Constitutive Relation for the Rate-Dependent Mechanical Behavior of Rubber-Like Elastomers Based on Thermodynamic Theory

Effect of Constitutive Equations on Finite Element Analysis Results of Crack Tip J-integral of Vulcanized Natural Rubber

Finite element analysis of silicone rubber based on Yeoh constitutive model and Ogden constitutive model

A comparative study of 85 hyperelastic constitutive models for both unfilled rubber and highly filled rubber nanocomposite material

A Nonlinear Viscoelastic Constitutive Model for Finite Deformation Rubber-like Materials

Cracking Energy Density Calculation Of Hyperelastic Constitutive Model And Its Application In Rubber Fatigue Life Estimations

Study on Hybrid Hyperelastic Constitutive Model for Rubber Material

On the Large Deformation Rubber-Like Materials: Constitutive Laws and Fem

Experimental Mechanics And Numerical Prediction On Stress Relaxation And Unrecoverable Damage Characteristics Of Rubber Materials