Abstract:The aim of this paper is to further demonstrate the advantages and effectiveness of the constitutive formulation proposed by Huang (Huang 2014 J. Appl. Mech. 59, 902-908 ()). In this formulation, any strain-energy function for an incompressible material can be easily generalized to include the effect of material compressibility, in which only a few material parameters and material functions to be fitted with the experimental data are required. To this end, the Ogden model for incompressible rubber-like solids is chosen as the starting point. By means of this formulation, the generalized Ogden strain-energy function, which takes into account material compressibility, can conveniently be constructed so long as its incompressible counterpart is given. The obvious advantage shown in this paper is that only a few material parameters and material functions are needed, i.e. in addition to the material parameters used in the original Ogden model for incompressible solids, only one material function depending on the volume ratio is involved to characterize the effect of compressibility. Both the material parameters in the original Ogden model and the material function suggested in this paper can be determined by fitting the experimental data for uniaxially tensile test and hydrostatic deformation test of rubbers, respectively. The present model considering compressibility is general since it can be applied to predict the stress-strain responses of rubber-like materials and porous rubbers in various loading conditions. With the present formulation, the applicable range of the celebrated Ogden model can be further broadened, which should be of practical importance for accurately describing the mechanical behaviour of rubber-like solids. This article is part of the theme issue 'The Ogden model of rubber mechanics: Fifty years of impact on nonlinear elasticity'.

Finite element analysis of silicone rubber based on Yeoh constitutive model and Ogden constitutive model

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

The Selection Strategy Of The Rubber Material Constitutive Relations In Finite Element Analysis

Establishment of Constitutive Model of Silicone Rubber Foams Based on Statistical Theory of Rubber Elasticity

Calculation of Strain Energy Density Function Using Ogden Model and Mooney-Rivlin Model Based on Biaxial Elongation Experiments of Silicone Rubber

A Nonlinear Hyper-Viscoelastic Constitutive Model for Rubber Material with Finite Strain

A novel viscoelastroplastic constitutive model of rubber materials and parameter identification

A generalized Ogden model for the compressibility of rubber-like solids

Experimental and modeling studies on contact mechanics of silicone rubbers

Application of Hyperelastic Constitutive Models in Finite Element Analysis on Tires

Research on Modeling Improvement of Rubber Isolators by Considering Multi-Loading Conditions

Modeling Method of Constitutive Law of Rubber Hyperelasticity Based on Finite Element Simulations

A comparative study of 85 hyperelastic constitutive models for both unfilled rubber and highly filled rubber nanocomposite material

A Study on the Effects of Hyperelastic Constitutive Models on the Static Characteristic Prediction of Rubber Isolator

Stiffness Analysis of Rubber Bushing Based on Constructive Models

Comparison of two hyperelastic models for carbon black filled rubber

Viscoelastic Constitutive Model of Rubber Mix

Calculating Methods for Force Versus Displacement Relation of a Rubber Isolator

A Constitutive Model and FEA of Rubber under Small Oscillatory Load Superimposed on Large Static Deformation

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

Study on Hybrid Hyperelastic Constitutive Model for Rubber Material