Abstract:Online monitoring of outdoor high voltage SF6 circuit breakers (HVCBs) is essential to detecting potential damages. To this end, the study of accurate and non-invasive monitoring methods has been significantly investigated in recent decades. Considering that HVCB vibration patterns carry important information about mechanical and electrical integrity and that vibration analysis requires a low level of invasiveness, this article presents methods of obtaining mechanism and reaction times using interference signals of outdoor high voltage SF6 circuit breakers (HVCBs). Compared to traditional methods of monitoring outdoor SF6 circuit breakers that are based on encoders, the proposed method presented ease of installation, as it only requires the insertion of accelerometers. The method of obtaining the mechanism time is based on the use of interference and auxiliary contact signals, in the time domain, where the accelerometer is installed, in the structure of the HVCB, makes it possible to guarantee the moment of the trip command. To obtain the reaction time of each HVCB pole, the envelope technique was applied with the Hilbert transform module of the hearing signal, filtered in a certain resonance band. The proof of the technique of analyzing the vibration of the signal in time was developed with laboratory tests of an HVCB, instrumented with accelerometers and angular encoders. The results obtained via vibration analysis were compared with those obtained via angular encoders and it was concluded that with the acceleration signals, in time, it is possible to obtain performance parameters of an HVCB from its displacement curve. Finally, the online monitoring of the circuit breaker applied in the field is presented, where the acquisition of trip current signals, the condition of the SF6 gas and extinguishing current signals were added to the instrumentation.

Online Monitoring System of HVDC Breaker based on PAC Data Acquisition Technique

Iterative Online Fault Identification Scheme for High-Voltage Circuit Breaker Utilizing a Lost Data Repair Technique

Automated monitoring and analysis for high voltage circuit breaker

Architecture and Key Technologies of Wide-area Collaborative Monitoring System for Power Grid Wide-frequency Oscillation

Auto‐monitoring System for Residual Current Circuit Breakers

Mechanical Condition Monitoring for High Voltage Circuit Breakers

A New Processing Method of Mechanical Vibration Signals from High-Voltage Circuit Breakers' Monitoring

Hardware Design of Online Monitoring Device for the High-voltage Vacuum Circuit Breaker

Emi Analysis of Hybrid Hvdc Breaker

A Voltage Full-waveform Reconstruction Method Based on Radiative Near-Field of Electric Field for the Hybrid DC Breaker of MMC-HVDC

On line monitoring of operation time for SF_6 high-voltage circuit breakers based on wavelet algorithm

An Online Non-Invasive Condition Assessment Method of Outdoor High-Voltage SF6 Circuit Breaker

Hybrid Mechanical-Static Dc Circuit Breaker And Dc Breaking

Topology, Control and Fault Analysis of a New Type HVDC Breaker for HVDC Systems

The development of online monitor system of vacuum circuit breaker's electrical endurance

Early Detection of Health Condition Degradation of Circuit Breaker Based on Electrical Quantity Monitoring

Research on mechanical condition monitoring for HV circuit breakers

Processing of Mechanical Vibration Signals of High- Voltage Circuit Breakers Based on Fractal Theory

Research and Development of 500kv Hybrid HVDC Circuit Breaker with Current Commutation Drive Circuit

Circuit Breaker Arc Fault Detection Based on Fault Recording Data in HVDC Converter Station

Implementations and Experiences of Wide-Area HVDC Damping Control in China Southern Power Grid