Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

The preparation of PVDF/clay nanocomposites and the investigation of their tribological properties

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Influence of Clay and Predispersion Method on the Structure and Properties of Polystyrene (ps)‐clay Nanocomposites

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Structural, thermal, and tribological properties of poly(vinylidene fluoride)/nano-TiO2 composites prepared by dry-mixing and hot-press technique

Tribological Enhancement Effect of Main-Chain Thermotropic Liquid Crystalline Polymer

Tribological properties of kaolin filled UHMWPE composites in unlubricated sliding

Electrical Properties of Binary PVDF/clay and Ternary Graphite-doped PVDF/clay Nanocomposites

Studies On Characterization, Thermal Property And Rheological Property Of P(An/Vac)/Clay Nanocomposites

The effect of clay modification on the structure, dielectric behaviour and mechanical properties of PVDF/PMMA/CTAMag polymer nanocomposites as potential flexible performance materials

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites

The Preparation of PTFE Nanocomposites and Their Mechanical and Tribological Properties

Comparison Of Tribological Performances Of High Density Polyethylene Enhanced With Carbon Nanofibers

Preparation and Properties of Nanocomposites Based on Different Polarities of Nitrile–butadiene Rubber with Clay

PREFERENTIAL INTERCALATION BEHAVIOR OF CLAY AND ITS EFFECT ON THE THERMAL DEGRADATION IN IMMISCIBLE PP/PS BLENDS

Advance in Research on Tribological Properties of PTFE Nanocomposites

Tribological Properties of Nanoclay Reinforced Polyimide Nanocomposite Coatings for Alloy Steels

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation

Preparation of CF/PEEK and Study on Friction Performance

Improved mechanical properties and abrasion resistance of styrene butadiene rubber/butadiene–styrene–vinyl pyridine rubber/clay nanocomposites with strong interfacial interaction

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS