Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. Aluminum-based composite materials have garnered considerable attention in recent years owing to their outstanding mechanical and tribological properties. The integration of clay and Al2O3 into the aluminum matrix has notably elevated its tribological, corrosion, mechanical, and metallurgical characteristics. An examination of the metallurgical properties involved a thorough analysis of the material's microstructure and wettability. Notably, the composite material demonstrated enhanced wettability and a more uniformly distributed reinforcement, leading to improved mechanical attributes when incorporating 5% alumina and 5% clay particles. This composition resulted in heightened strength, improved hardness, and increased fatigue strength. Specifically, the addition of a mixture of ball-milled 5% alumina and 5% clay particles led to substantial improvements, with tensile strength, hardness, and fatigue strength increasing by approximately 40.49%, 44.11%, and 62.15%, respectively. However, this enhancement came at the cost of reduced toughness in aluminum, decreasing by about 46.66% following the addition of the ball-milled mixture. Tribological assessments, involving wear tests under varying loads and speeds, demonstrated that the inclusion of 5% clay and 5% Al2O3 substantially improved wear resistance. Furthermore, corrosion resistance was evaluated, revealing that the composite material exhibited enhanced corrosion resistance attributed to the passivation of the surface. Altogether, these findings underscore the promising potential of aluminum-based composite materials for various applications, particularly when tailored with specific ratios of alumina and clay particles.

Tribological Properties of Nanoclay Reinforced Polyimide Nanocomposite Coatings for Alloy Steels

Controllable in situ fabrication of self-lubricating nanocomposite coating for light alloys

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Tribological properties of molybdenum ion-plated and ion-sulfurized composite coating on mild steel

Comparative study on tribological mechanisms of polyimide composites when sliding against medium carbon steel and NiCrBSi

Enhanced Mechanical and Tribological Capabilities of a Silicon Aluminum Alloy with an Electroplated Ni–Co–P/Si3N4 Composite Coating

Tribological Behavior of SNC-MAO Composite Coatings Formed on the Surface of Aluminum Alloys

The preparation of PVDF/clay nanocomposites and the investigation of their tribological properties

Mechanical Properties and Tribological Behaviour of Electroless Ni–P–Cu Coatings on Corrosion-Resistant Alloys under Ultrahigh Contact Stress with Sprayed Nanoparticles

Tribological Behaviour of Polymeric Coatings. Part I. Aramid Particle-Reinforced Epoxy Nanocomposite Systems

Influence of Molybdenum Content and Load on the Tribological Behaviors of In-Situ Cr3C2-20 Wt % Ni Composites

Microstructure, mechanical properties and tribological behaviors of TiAlN-Ag composite coatings by pulsed magnetron sputtering method

Tribological, corrosion, mechanical, and metallurgical behavior of clay and Al2O3-reinforced aluminum-based composite material

Tribological performance and thermal behavior of epoxy resin nanocomposites containing polyurethane and organoclay

Microstructure evolution and tribological behavior of the laser in-situ synthesized ceramics reinforced CoFH alloy-based composite coating on the 304 stainless steel

Self-Lubricating Al2o3/Ptfe Composite Coating Formation on Surface of Aluminium Alloy

One-step Fabrication of Amorphous/ito-Cnts Coating by Plasma Electrolytic Oxidation with Particle Addition for Excellent Wear Resistance

In Situ Synthesis of (M:Nb,Ta)C/Ni35 Composite Coating Cladded on 40Cr Steel

Microstructure, Friction, And Wear Properties Of Ni-Al2o3-Mos2 Composite Coatings

2D Mo2CTx Reinforced Polyimide Nanocomposites for Enhancement of Surface Tribological Performance at Elevated Temperatures

Elucidation of Abrasive Wear and Slurry Erosion Behavior of Fe Matrix Composites Reinforced with Metallic Coating Modified ZTAP Ceramics