Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Progress in and Outlook for Cryogenic Microcooling

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Temperature Stability of a Joule–Thomson Microcooler Operating with Pure and Mixed Gases

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Micromachined cryogenic cooler for cooling electronic devices down to 30 K

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Advances in high frequency pulse tube cryocooler research(PartⅠ)

A Micromachined Joule–Thomson Cryogenic Cooler with Parallel Two-Stage Expansion

A Critical Review of Liquid Helium Temperature High Frequency Pulse Tube Cryocoolers for Space Applications

Micrometre-scale refrigerators

Sorption Cryogenic Cooling: Fundamentals, Progress, and Outlook

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Cryogenic Cooling Using Tunneling Structures with Sharp Energy Features.

A critical review of precooled JT cryocoolers working at 4 K for space applications

A closed-cycle miniature Joule-Thomson cooler for cooling cold electronics

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Cryocoolers 11

Review Of Recent Advances In Stirling-Type Pulse Tube Cryocoolers

Developments in advanced and energy saving thermal isolations for cryogenic applications

Review of Power Electronics Components at Cryogenic Temperatures

Progress and Challenges in Utilization of Ejectors for Cryogenic Cooling