Abstract:Yttrium oxide doped with europium has a great prospective for FED and PDP phosphor application. In present study, the precursor of yttrium oxide hydroxide nitrate nanorod, which was prepared via hydrothermal reaction route using PEG-6000 as template from the starting Y(NO3)(3) and KOH reactant system, was used to prepare Y2O3:Eu3+ nanorod via a post annealing process during which the precursor with adjustable shape and size was transformed to final Y2O3:Eu3+ product. XRD, field emission scanning electron microscopy (FE-SEM) and photoluminescence spectra (PL) were used to characterize the crystalline, morphology and luminescence properties of as-formed Y2O3:Eu3+ products synthesized at different post annealing temperatures, respectively. The results indicate that grain morphology of obtained Y2O3:Eu3+ product was nanorod with a mean diameter of about 40 similar to 60 nm and length of about 500 similar to 700 nm, the nanorod structure and morphology of obtained Y2O3:Eu3+ product maintained during post annealing process and the size varied slightly with different annealing temperatures. Pure cubic Y2O3:Eu3+ phase was formed and the size was the smallest at annealing treatment of 500 degrees C. Under the annealing temperature below 500 degrees C its diameter increased with increasing annealing temperature, and remained in a stable size when the annealing temperature was above 500 degrees C. The PL spectra of excitation spectra of Y2O3:Eu3+ product show that it exhibits excitation band located at about 395 and 468 nm, respectively. Above two excitation bands could be ascribed to the transition 4f-4f of Eu3+ ions in the Y2O3 host. On the other hand, the main emission peaks of the as-prepared products could be ascribed to the Eu3+ ions transition from D-5(0) to F-7(2). Furthermore, the luminescent intensity was improved about three times when the annealing temperature increased from 500 to 1000 degrees C.

Synthesis and Cathodoluminescent Properties of Y2O3: Eu3+ Phosphor with Micron-sized Controllable Particles

Synthesis of Nanometer Y2o3 : Eu Phosphor and Its Luminescence Property

Two-steps Prepared Monodisperse Li-doped Y2O3:Eu3+ Microspheres and Their Luminescence Properties

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Synthesis and photoluminescence of nano-Y2O3:Eu3+ phosphors

Electro-deposition of Y2O3:Eu3+ thin film phosphor and its luminescent properties

Solution Combustion Synthesis and Enhanced Luminescence of Eu3+-activated Y2Ce2O7 Phosphor Nanopowders

Facile synthesis and luminescence properties of uniform and well-dispersed YF 3:Eu 3+ architectures

Shape-tailored Photoluminescent Intensity of Red Phosphor Y2O3:Eu3+

Luminescent Properties of Y2O3:Eu Synthesized by Sol–gel Processing

Rare-Earth-Doped Y4Al2O9 Nanoparticles for Stable Light-Converting Phosphors

Sequential enlarging Lu2O3:Eu phosphor mono-spheres into near micro-meter size range by controlled nucleation and growth for attaining optimum photoluminescence properties

Synthesis and cathodoluminescent properties of Y 2SiO 5:Tb 3+ phosphors prepared from uniform precursor

Multiple morphologies of YF 3 : Eu 3+ microcrystals: Microwave hydrothemal synthesis, growth mechanism and luminescence properties

Synthesis and characterization of highly Eu3+-doped CaY2Sb2(ZnO4)3 red phosphors with abnormal thermal quenching performance for w-LEDs application

Preparation and Properties of Ti, Eu Co-Doped Y2O2S:0.06Ti,0.08Eu Phosphor with Red Long Afterglow

Preparation And Luminescence Properties Of Y2o3 : Eu3+ Nanorods Via Post Annealing Process

Preparation of Y2o2s : Eu3+ Phosphors by A Novel Decomposition Method

SYNTHESIS OF Y_2O_3∶Eu NANOCRYSTALLINE BY COMPLEX PRECURSORS

Luminescent Properties of Li+ Doped Nanosized Y2O3:Eu

Optimization of the Photoluminescence Properties of Electrodeposited Y[sub 2]o[sub 3]:Eu[sup 3+] Thin-Film Phosphors