Abstract:The power spinning of tailor-welded blank (TWB) provides a feasible way to form the large-scale curved heads of aluminum alloy. However, the inhomogeneous material property of TWB produces different and more complex spinning behaviors compared with the traditional spinning of an integral homogenous blank. In this research, the deformation characteristics, microstructure, and the properties of the power spun curved head with aluminum alloy TWB were studied. A finite element model considering the inhomogeneous material property of welded blank is developed for the analysis of the power spinning process. To conduct accurate and efficient simulation, an effective meshing method is proposed according to the feature of TWB. The simulation and experimental results show that the weld zone (WZ) presents the larger equivalent stress but smaller equivalent strain than base material zone (BMZ) in power spinning due to its larger deformation resistance. Under the combined effects of the spiral local loading path and inhomogeneous deformability of TWB, the equivalent strain near the weld zone has an asymmetric V-shaped distribution. Strain inhomogeneity gradually increases with deformation and leads to an increase of the flange swing degree. In addition, the circumferential thickness distribution is relatively uniform, which is little affected by the existence of the weld line. However, the circumferential unfitability distribution becomes non-uniform and the roundness is worsened due to the existence of the weld line. Compared to the initial blank, the microstructure in WZ and BMZ are both elongated after spinning. The tensile strength is improved but plasticity reduced after power spinning based on the circumferential and radial tests of WZ and BMZ. The results are of theoretical and technical guidance for the power spinning of the curved head component with TWB.

Finite Element Simulation of Multi-pass Power Spinning of Thin-walled Ti2AlNb Alloy Shell

Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell

Finite Element Modeling of Power Spinning of Thin-Walled Shell with Hoop Inner Rib

Advances in Spinning of Aluminum Alloy Large-sized Thin-walled and Special-curved Surface Head

FEM numerical simulation on multi-pass heat spinning for curvilinear-shape irregular workpiece of superalloy Ni-Cr-W-Mo

Formability Enhancement in Hot Spinning of Titanium Alloy Thin-Walled Tube Via Prediction and Control of Ductile Fracture

Simulation on Power Spinning Process for Cylindrical Parts of Titanium Alloy

FEM Numerical Simulation of Spinning Processing for TC4 Alloy

Finite Element Simulation of Tube Power Spinning

Power Spinning of the Curved Head with Tailor Welded Aluminum Alloy Blank: Deformation, Microstructure, and Property

Finite Element Simulation of Hot Spinning for GH4169 Superalloy Thin-Walled Shell

FEA of Power Spinning of Complicated Thin-Walled Shell Based on Orthogonal Optimization

Numerical Simulation of Stagger Spinning for D406A High-Strength Steel

Study on Power Spinning Feasibility of High Strength & Toughness Ti-451 Alloy

Numerical Simulation of Influence of Material Parameters on Splitting Spinning of Aluminum Alloy

Research on multi-pass hot spinning based on finite element simulation and experiment for aluminum alloy component

Effect of Multi-Pass Power Spinning on Microstructure Homogenization and Mechanical-Property Strengthening of Ti2AlNb-Based Alloy Using Welded Tube Blank

FEM Numerical Simulation of First-Pass Heat Spinning for Ni-Cr-W-Mo Superalloy Workpiece with Curvilinear Shape

Study on the spinning process of thin-walled aluminum alloy vessel head

Study on Plastic Deformation Behavior of Hot Splitting Spinning of TA15 Titanium Alloy

3D FE Modeling of the Power Spinning of Complicated Thin-walled Shell