Abstract:Die-less spinning is an advance incremental forming process widely used for the manufacturing of thin-walled shell components. During the spinning, workpiece shape and forming state both change continuously, and the influence of process parameters on the forming results is also time-varying, which make it difficult to control the forming quality. To this end, this work develops a real-time measurement system and an online pre-perception method to provide technical support for dynamic control of the spinning process. Specifically, the real-time measurement system is constructed firstly by placing two laser profilers bilaterally at two sides of the workpiece. Based on the measuring data of two laser profilers, the profile data of workpiece cross-section is obtained by coordinate transformation, data denoising and correcting the error caused by inclined workpiece surface. Then, an algorithm is proposed to identify the critical geometric parameters (flange width, roller action radius, wall thickness and flange fluctuation degree) of workpiece shape from the profile data. In contrast to the measurement results by a three-coordinate measuring machine, the developed system presents a real-time measurement error less than 4%. Moreover, an online pre-perception method of wall thickness and wrinkling defect is developed based on the real-time measured workpiece shape parameters. The online pre-perception of wall thickness and wrinkling defect presents high accuracy with the relative error less than 2.1%. The above results indicate both the workpiece dimensions and spinning state can be well real-time measured and online pre-perceived, which can provide important foundation for the study of time-varying influence and dynamic control of the spinning process.

FEA of Power Spinning of Complicated Thin-Walled Shell Based on Orthogonal Optimization

Influence of process parameters on the degree of inhomogeneous deformation in spinning of complicated thin-walled parts with hoop inner rib

Finite Element Modeling of Power Spinning of Thin-walled Ti2AlNb Alloy Shell

3D FE Modeling of the Power Spinning of Complicated Thin-walled Shell

Dynamic Optimization of Die-Less Spinning Process Through Autonomous Modeling of Time-Varying Forming Law

Wall Thickness Variation During Multi-Pass Spinning of Large Complicated Shell

Advances in Spinning of Aluminum Alloy Large-sized Thin-walled and Special-curved Surface Head

Exploring Effect of Spinning Gap on Forming Quality of Second Pass Spinning of Large-Sized Complicated Thin-Wailed Shell

Study on Spinning of Pentagonal Cross-Section Hollow-Part Based on Orthogonal Experiment Design

Influence of Process Parameters on Spinning Force and Wall Thickness Difference of Shear Spinning

Finite Element Modeling of Power Spinning of Thin-Walled Shell with Hoop Inner Rib

Influences of Material Parameters on Power Spinning Process of Large Ellipsoidal Heads with Variable Thicknesses

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Forming dependence on spin roller paths for thin-walled complex components from 2195 Al-Li alloy TWBs

Research on the influence of roller structure on forming quality of high-strength steel during flow spinning forming

Influences of Roller Parameters on Power Spinning of Large Ellipsoidal Heads with Variable Thickness

Online Pre-Perception of Forming State Based on Real-Time Measurement in Spinning of Thin-Walled Shell Component

SPECIFIC TECHNIQUES IN FE PROCESS MODELLING FOR SPIN-FORMING OF A THIN WALLED SHELL PART WITH AN INNER HOOP RIB

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

Study on the spinning process of thin-walled aluminum alloy vessel head

Finite Element Simulation of Multi-pass Power Spinning of Thin-walled Ti2AlNb Alloy Shell