Abstract:Die-less spinning is an advance incremental forming process widely used for the manufacturing of thin-walled shell components. During the spinning, workpiece shape and forming state both change continuously, and the influence of process parameters on the forming results is also time-varying, which make it difficult to control the forming quality. To this end, this work develops a real-time measurement system and an online pre-perception method to provide technical support for dynamic control of the spinning process. Specifically, the real-time measurement system is constructed firstly by placing two laser profilers bilaterally at two sides of the workpiece. Based on the measuring data of two laser profilers, the profile data of workpiece cross-section is obtained by coordinate transformation, data denoising and correcting the error caused by inclined workpiece surface. Then, an algorithm is proposed to identify the critical geometric parameters (flange width, roller action radius, wall thickness and flange fluctuation degree) of workpiece shape from the profile data. In contrast to the measurement results by a three-coordinate measuring machine, the developed system presents a real-time measurement error less than 4%. Moreover, an online pre-perception method of wall thickness and wrinkling defect is developed based on the real-time measured workpiece shape parameters. The online pre-perception of wall thickness and wrinkling defect presents high accuracy with the relative error less than 2.1%. The above results indicate both the workpiece dimensions and spinning state can be well real-time measured and online pre-perceived, which can provide important foundation for the study of time-varying influence and dynamic control of the spinning process.

Exploring Effect of Spinning Gap on Forming Quality of Second Pass Spinning of Large-Sized Complicated Thin-Wailed Shell

Advances in Spinning of Aluminum Alloy Large-sized Thin-walled and Special-curved Surface Head

Forming dependence on spin roller paths for thin-walled complex components from 2195 Al-Li alloy TWBs

SPECIFIC TECHNIQUES IN FE PROCESS MODELLING FOR SPIN-FORMING OF A THIN WALLED SHELL PART WITH AN INNER HOOP RIB

Wall Thickness Variation During Multi-Pass Spinning of Large Complicated Shell

FEA of Power Spinning of Complicated Thin-Walled Shell Based on Orthogonal Optimization

Online Pre-Perception of Forming State Based on Real-Time Measurement in Spinning of Thin-Walled Shell Component

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

3D FE Modeling of the Power Spinning of Complicated Thin-walled Shell

Forming Mechanism of Defects in Spinning of Large Complicated Thin-Wall Aluminum Alloy Shells

Dynamic Optimization of Die-Less Spinning Process Through Autonomous Modeling of Time-Varying Forming Law

Research on Variation of Stress and Strain Field and Wall Thickness During Cone Spinning

Influence of Process Parameters on Spinning Force and Wall Thickness Difference of Shear Spinning

Study on the spinning process of thin-walled aluminum alloy vessel head

Advances in Spinning of Aluminum Alloy Large-Sized Complicated Thin-Walled Shells

Influences of Material Parameters on Power Spinning Process of Large Ellipsoidal Heads with Variable Thicknesses

Finite element simulation and microstructure of two-pass inner spinning process of curved-generatrix cone cylindrical parts with annealing/quenching

Research on the influence of roller structure on forming quality of high-strength steel during flow spinning forming

Marginal-restraint Mandrel-Free Spinning Process for Thin-Walled Ellipsoidal Heads

Influence of process parameters on the degree of inhomogeneous deformation in spinning of complicated thin-walled parts with hoop inner rib

Influence of Process Parameters on Conventional Spinning Formation Process