Abstract:In this study, the T85-treated Al-3.78Cu-1.17Li-0.7Mg-0.32Ag-0.25Mn-0.33Zn-0.12Zr alloy thermally exposed at a series of temperatures (100–300 °C) for 100 h, 500 h, and 1000 h was systematically investigated. The results show that the thermal stability of the alloy is more closely correlated with thermal exposure temperature than with exposure duration. Excellent thermal stability in strength is obtained below 150 °C, which can be linked to the diameter and number density of T1 (Al 2 CuLi) precipitates continually increasing with a thickness less than 2 nm. However, the widened precipitation-free zones (PFZs) associated with continuous grain boundary precipitates (GBPs) benefit intergranular fracture, contributing to a decrease in toughness and elongation. In the window of 175–200 °C, T1 precipitates tend to thicken and are gradually substituted by coarse θ'-Al 2 Cu and S-Al 2 CuMg with elevating temperature. Simultaneously, the continuous GBPs transverse to discrete circle-like shapes, and thus intergranular ductile fracture becomes dominant. Therefore, the related hardness and strength decrease, while the electrical conductivity and toughness are the opposite. At temperatures over 250 °C, thermal exposure can reduce the dislocation density and dissolve T1 phases to form T2-Al 6 Cu(Li, Mg) 3 and cubic C phases, leading to a dramatic decrease in strength and toughness.

Trace Element Effects on Microstructure and Mechanical Properties in Al-Cu-Li Alloy after Thermal Exposure

Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloyed with Ce

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

Analysis of the micro-alloying effect of cerium additions to the Al-Li alloy 2090

Effects of Thermal Exposure on Mechanical Properties of Al-4.87cu-1.2mg-1.0ag Alloy

Effects of Thermal Exposure on the Mechanical Properties and Microstructure Stability of an Al-Cu-Mg-Ag Alloy

Effect of Ce on structures and tensile properties of high-strength Al-Cu-Li alloy

Effects of Trace Ce on the Properties of Cu-Ag-Cr Alloy

Influence of cerium on microstructures and mechanical properties of Al-Zn-Mg-Cu alloys

Effects of Ce and Ti on the Microstructures and Mechanical Properties of an Al-Cu-Mg-Ag Alloy

The Effect of Thermal Exposure on the Microstructures and Mechanical Properties of 2198 Al–Li Alloy

Effect of Rare Earth Ce Addition on the Microstructure and Mechanical Properties of an Al–Cu–Mg–Ag Alloy

Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy

Influence of thermal exposure on the microstructure evolution and mechanical behaviors of an Al-Cu-Li alloy

Effects of composition and thermal cycle on transformation behaviors, thermal stability and mechanical properties of CuAlAg alloy

Microstructure and Mechanical Properties of Al-Cu-Ce Alloy

Effect of Ce on the Thermal Stability of the Ω Phase in an Al-Cu-Mg-Ag Alloy

Effect of Ce content on microstructure and mechanical properties of Al-Si alloy

Research Progress of Effect of Rare Earth Elements on Microstructures of Al-Cu-Mg-Ag Alloys

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy