Abstract:Ti is regarded as one of the promising grain refiners in cast Al-Li-Cu alloys, but few research works have been done on its independent role. In this study, the effect of Ti on the microstructure evolution and mechanical properties of cast Al-2Li-2Cu-0.5Mg base alloy was investigated. The results revealed that the grains can be prominently refined with the increase of Ti addition. After adding Ti, high density TiB 2 -Al 3 Ti composite particles with a low lattice misfit form as heterogeneous nucleation sites for the α-Al matrix. δ′(Al 3 Li) and T 1 (Al 2 CuLi) precipitates that provide enhanced strength are dominated in the alloys after T6 aging treatment. The average size of both δ′ and half-width of δ′-precipitation free zone (PFZ) decreases gradually with the increase of Ti content. This is because the higher binding energy between Ti atoms and vacancies limits the diffusion efficiency of Li atoms, and thus results in a higher ductility. Additionally, no nano-sized Al 3 Ti or core-shell structure of Al 3 (Li, Ti) particles are found. The tensile property test results indicate that the Al-2Li-2Cu-0.5Mg alloy achieves optimal properties after aging at 175 °C for 32 h when 0.15wt.% Ti is added. It exhibits a yield strength of 352±5 MPa, an ultimate tensile strength of 423±6 MPa, and an elongation of (3±0.4)%. These findings are expected to offer a reliable theoretical guidance for the industrial composition design of the Al-Li-Cu series cast alloys.

Effects of Ce and Ti on the Microstructures and Mechanical Properties of an Al-Cu-Mg-Ag Alloy

Effect of Ce and Ti doping on microstructure and properties of the alloy AlCuMgAg

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

The effect of minor Ti and Mn additions on the microstructure and mechanical properties of additive manufactured Al–Ce–Mg alloys

Effect of Ce on structures and tensile properties of high-strength Al-Cu-Li alloy

Effect of minor cerium additions on microstructure and mechanical properties of cast Al – Cu – Mg – Ag alloy

Effect of Ti on Microstructure and Mechanical Properties of Die-Cast Al-Mg-Zn-Si Alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effect of Ce addition on microstructure of Al 20Cu 2Mn 3 twin phase in an Al-Cu-Mn casting alloy

Influence of cerium on microstructures and mechanical properties of Al-Zn-Mg-Cu alloys

Effect of Cerium Addition on Precipitation and Microstructure of Al-Cu-Mg-Mn-Ag Alloys

Effect of Ti content on microstructures and mechanical properties of cast Al-2Li-2Cu-0.5Mg alloy

Effect of Rare Earth Ce Addition on the Microstructure and Mechanical Properties of an Al–Cu–Mg–Ag Alloy

Effect of Ce content on microstructure and mechanical properties of Al-Si alloy

Effects of Submicron-Sized TiC Particles on the Microstructure Modification and Mechanical Properties of Al-Si-Mg Alloy

Microstructure and Mechanical Properties of Ti44Al6Nb Alloys with Different Cerium Contents

Effect of rare earth Ce addition on microstructure and mechanical properties of titanium alloy Ti-6Al-4V

Effect of Ce Content on the Microstructure and Mechanical Properties of Squeeze-Cast Al–5Mg-2.2Si-0.6Mn Alloys

Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy

Effect of Ce on the Thermal Stability of the Ω Phase in an Al-Cu-Mg-Ag Alloy

Nfluence of Ce on the Microstructure and Refinement Behavior of Al-5 Ti-0 .5 Mg-0 .15 Gdalloy