Abstract:Casting experiments were carried out on Al–7Si using different additions of rare earth Ce at a reaction temperature of 1200 K. Based on the ternary phase diagram of Al–Si–Ce, the effects of rare earth Ce on the α-Al grain refinement, the mechanism of the eutectic Si phase modification, as well as on the mechanical properties and fracture morphology of the alloy were investigated. The results show that the addition of rare earth Ce generates a Ce-containing phase inside the alloy, which becomes a heterogeneous core of eutectic Si and changes the nucleation conditions of eutectic Si. The mechanical properties of the alloy were optimal when the Ce addition was 0.2 wt.%, and the defect porosity and average pore area were minimized. Ce-containing phases were found at fracture cracks, and these Ce-containing phases were deviated and aggregated at grain boundaries, which induced defects to be generated, and microcracks were easily produced during plastic deformation, which ultimately led to the fracture of the alloy. According to the growth kinetic relationship, due to the difference of different atomic radii, the inter-atomic forces lead to different nucleation densities of grains. With the generation of Ce-containing phases at the interfaces, the eutectic Si changes its growth direction and grows towards a 70° angle to the original direction with a tighter atomic ordering sequence of the stacking, and more twinned Si is generated and gradually stacked up at the interfaces, which directly alters the morphology of the eutectic Si.

Nfluence of Ce on the Microstructure and Refinement Behavior of Al-5 Ti-0 .5 Mg-0 .15 Gdalloy

Effect of CeO2 on Al–Ti–C and matrix conversion between TiC and α-Al orientation relationship

Effect of Ce Content on the Microstructure and Mechanical Properties of Al-Cu-Li Alloy

Effect of CeO2 Size on Microstructure, Synthesis Mechanism and Refining Performance of Al-Ti-C Alloy

Synthesis of Al-5Ti-1B-1Ce alloy from remelted chips and its refinement effect

A Novel Al-Ti-C-B-Ce Alloy Preparation Process and Its Refinement Effect to A356 Alloy

Effect of the addition of cerium on the microstructure evolution and thermal expansion properties of cast Al-Cu-Fe alloy

Effect of rare earth Ce addition on microstructure and mechanical properties of titanium alloy Ti-6Al-4V

Synergistic Effect of RE (La, Er, Y, Ce) and Al-5Ti-B on the Microstructure and Mechanical Properties of 6111Aluminum Alloy

Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy

Effect of rare earth Ce on the microstructure and mechanical properties of cast Al–7Si alloys

Refining Mechanism and Elevated-Temperature Mechanical Properties of Al-Ce Alloys Solidified under Super Gravity Field

Effect of Ce Addition on Modifying the Microstructure and Achieving a High Elongation with a Relatively High Strength of As-Extruded AZ80 Magnesium Alloy

Effect of Ce and Y on Microstructures and Properties of Al-11.0Zn-3.1Mg-1.22Cu-0.1Sr-0.2Zr-0.1Ti Alloy

Tailoring the microstructure and enhancing the corrosion resistance of extruded dilute Mg-0.6Al-0.5Mn-0.25Ca alloy by adding trace Ce

Cerium Addition Effect on Modification of Inclusions, Primary Carbides and Microstructure Refinement of H13 Die Steel

Effects of Ce content on the modification of Mg2Si phase in Mg-5Al-2Si alloy

Effect of Cerium Content on the Evolution of Inclusions and Formation of Acicular Ferrite in Ti-Mg-Killed EH36 Steel

Influence of cerium treatment on inclusion modification and as-cast microstructure of high-strength low-alloy steel

Influence of Fe on grain nucleation and growth of pure aluminum during refining by Al-Ti-B and Al-Ti-C master alloys

Influence of Ce on microstructure and mechanical properties of LA141 alloys