Abstract:Tungsten-nickel-iron (W-Ni-Fe) alloys, commonly known as W heavy alloys (WHAs), exhibit enhanced ductility, thermal conductivity, and mechanical attributes. These properties render WHAs highly suitable as plasma-facing materials in lieu of pure W. This investigation examines the irradiation resistance of two WHAs—97W-2Ni-1Fe and 90W-7Ni-3Fe—by subjecting them to He ion irradiation at doses reaching 5 × 10 17 ions/cm 2 . The study establishes that low-dose irradiation (1 × 10 17 ions/cm 2 ) inflicted negligible surface damage on both WHA compositions. Nonetheless, increasing the radiation dose to 5 × 10 17 ions/cm 2 led to observable surface impairments, albeit at a reduced magnitude when compared to pure W. An array of analytical methods was employed to characterize irradiation-induced microstructures and void swelling, including positron annihilation spectroscopy, thermal desorption spectroscopy, and transmission electron microscopy. These analyses revealed that low-dose irradiated WHAs predominantly generated vacancy-type defects. Moreover, these defects evolved into He m V n and He m V n -NiFe complexes as the irradiation dose increased. Concurrently, He bubble density escalated with rising irradiation dosage. When subjected to an irradiation dose of 1 × 10 17 ions/cm 2 , both alloys manifested desorption levels approximately 6.5 times greater than that observed in pure W. The findings of this investigation offer valuable insights to the understanding of WHA irradiation behavior in nuclear materials.

Effect of Mechanical Milling Time on Helium Irradiation Behavior of W-Nb Alloys

The Influence of Different Isochronal Annealing Temperature on Helium Ion Irradiation Damage of W-Nb Composites

Helium Irradiation Behavior of Tungsten-Niobium Alloys under Different Ion Energies

Influence of Ball Milling Processing on the Microstructure and Characteristic of W–Nb Alloy

Effect of Mechanical Milling on the Microstructure of Tungsten under He+ Irradiation Condition

Surface Modification of W–V Alloy Exposed to High Heat Flux Helium Neutral Beams

The Irradiation Effects on the Nanoindentation Hardness and Helium Bubbles Evolution Mechanism of Ni-based Alloy

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

Effect of Helium Plasma Irradiation on Microstructures and Mechanical Properties of Tungsten

Fabrication of nanocrystalline supersaturated W–Al alloys with enhanced thermal stability and high sinterability

Effect of Y2O3 particles on the helium ion irradiation damage of W-2%Y2O3 composite prepared by wet chemical method

Effect of helium pre-implantation on the thermal shock performance of tungsten

Microstructure Evolution of MAB-phase WAlB During Helium Irradiation and Post-Irradiation Annealing

He ion irradiation resistance of W-Ni-Fe alloys with variable Ni and Fe concentrations

Helium effects on the surface and subsurface evolutions in single-crystalline tungsten

Microstructure evolution of helium irradiated (NbMoTaW)V 50 films with nanochannel structure under nanoindentation

Behavior of helium cavities in ion-irradiated W-Ni-Fe ductile-phase toughened tungsten

Mechanical Properties and Microstructural Change of W–Y2O3 Alloy under Helium Irradiation

Study on the microstructural evolution in NbMoTaW series refractory multi-principal element alloy films by low-energy and high-flux He ions irradiation

Characterization of dose dependent mechanical properties in helium implanted tungsten

In-Situ Helium Implantation and TEM Investigation of Radiation Tolerance to Helium Bubble Damage in Equiaxed Nanocrystalline Tungsten and Ultrafine Tungsten-TiC Alloy