Abstract:Co magnetic films are widely used in high-frequency magnetic recording and vertical magnetic recording due to their high saturation magnetization and magnetocrystalline anisotropy. In this work, ferromagnetic Co magnetic films were prepared on copper substrate by vacuum evaporation combined with heat treatment (H2 atmosphere), to investigate the impact of film thickness and annealing temperature on microstructure and magnetic properties. The results show that with the increase in annealing temperature, the Co thin film physical phase does not change significantly, the crystallinity increases, and the grain size increases, which is consistent with the results obtained from the SEM morphology map of the sample surface, leading to an increase in coercivity. By annealing experiments (atmospheric atmosphere) on Co magnetic films with and without an Al protective layer, as shown by scanning electron microscopy microscopic characterization results, it was verified that the Al layer can protect the inner Co layer from oxidation. As the film thickness increases from 10 to 300 nm, the magnetic properties of Co films change significantly. The saturation magnetization gradually increases from 0.89 to 5.21 emu/g, and the coercivity increases from 124.3 to 363.8 Oe. The remanence ratio of the 10 nm magnetic film is 0.82, which is much higher than the film remanence ratio of 0.46 at 50 nm. This is because when the thickness of the film is between 10 and 50 nm, the magnetic moments partially deviate from the in-plane direction, and the out-of-plane component reduces the film remanence ratio. This study shows that optimizing annealing temperature and film thickness can effectively control the structure and magnetic properties of Co magnetic films, which is of great significance for the development of the magnetic recording field.

Co Filled Porous Anodic Alumina Film Fabricated on Ecr-Al Film with Silicon Substrate

Magnetic Anisotropy and High Frequency Permeability of Multilayered Nanocomposite FeAlO Thin Films

Evolution of Magnetic and Transport Properties in Pore-Modified Coalo Antidot Arrays

Soft Magnetic Properties and High Frequency Permeability in [coalo/oxide] Multilayer Films

PREPARATION OF ARRAY FILM OF ALIGNED CARBON NANORODS ON ALUMINUM SUBSTRATE

Synthesis and Properties of Ni-Coated Porous Anodic Alumina Templates with Ultrafine Pore Diameter

Soft Magnetic Properties Of Sequential Deposited Co40fe40b20/Sio2 Multilayer Nanogranular Films For High Frequency Applications

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Magnetically controlled insertion of cobalt ferrite nanoparticles into a porous anodic aluminum oxide (AAO) membrane

Structure and Performance Optimization of Co Magnetic Thin Films Deposited by Vacuum Evaporation Coating

Anodizing process of Al films on Si substrates for forming alumina templates with short-distance ordered 25 nm nanopores

Large Area Co Nanoring Arrays Fabricated on Silicon Substrate by Anodic Aluminum Oxide Template-Assisted Electrodeposition

MAGNETITE AND MAGHEMITE THIN FILMS FOR MAGNETIC RECORDING

A Controllable and Widely Applicable Electrochemical Anodization Process to Fabricate Porous Anodic Aluminum Oxide Membrane

Fabrication and Characterization of the Hierarchical AAO Film and AAO-MnO2 Composite As the Anode Foil of Aluminum Electrolytic Capacitor

Nanopatterning of Magnetic Domains: Fe Coverage of Self-Assembled Alumina Nanostructure

Microstructure of Electroless Co Alloy Films for Perpendicular Magnetic Recording

Structure and magnetic property of Ni-Cu alloy nanowires electrodeposited into the pores of anodic alumina membranes

Magnetic properties of FePt nanoparticle assemblies embedded in atomic-layer-deposited Al2O3

Fabrication and Characterization of Porous Si-Al Films Anode with Different Macroporous Substrates for Lithium-Ion Batteries

Fabrication and characterization of anodic films onto the FeCrAl stainless steel in ethylene glycol electrolyte