Abstract:Commercially pure titanium specimens are subjected to three different treatments, and their bioactivity are evaluated by immersing the specimens in a simulated body fluid (SBF, Kokubo's recipe) for various periods up to 7 days, with particular attention being paid to the differences in apatite deposition between surfaces open to SBF and surfaces in contact with the container's bottom. The treatment with a H(2)O(2)/HCl solution at 80 degrees C for 30 min followed by heating at 400 degrees C for 1 h produces an anatase titania gel layer on the specimen surface. This gel layer deposits apatite both on the contact and on open surfaces, and apatite deposition ability does not change with pre-staking in distilled water. The treatment with a NaOH solution at 60 degrees C for 3 days produces a sodium titanate gel layer. This gel layer can deposit apatite only on the contact surface, and the apatite deposition ability is completely lost after 1 day of pre-staking in distilled water. It is concluded, therefore, that the bioactivity of the titania gel originates from the favorable structure of the gel itself while the bioactivity of the sodium titanate gel depends heavily on ion release from the gel. The third treatment, a simple heat treatment at 400 degrees C for 1 h, produces a dense (not porous) oxide layer on the specimen surface. The specimens can deposit apatite on the contact surface after only 3 days of staking in SBF, but they cannot deposit apatite on the open surface for up to 2 months of staking. The implications of such apatite deposition behavior have been discussed in relation to the environments of titanium implants in bone as well as to the methodology of the SBF staking experiment.

Preparation and Characterization of Bioactive Coating without Cracks on Potous Titanium Surface

Bioactive treatment of titanium surface using a H2O2/HCl solution

A Comparative Study of in Vitro Apatite Deposition on Heat-, H2O2-, and NaOH-treated Titanium Surfaces

BIOCERAMIC COATINGS ON TITANIUM SURFACES

Method of preparing TiSrO3 coating on surface of titanium implant

[Experimental Study of Fast Formation of Biomimetic Apatite Coatings on Pure Titanium Surface].

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Fabrication and evaluation of porous coatings doped with bioactive elements on titanium surfaces

PREPARATION OF BIOACTIVE FILM ON Ti6Al4V

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Bioactive macroporous titanium surface layer on titanium substrate

[Psychopathologic episodes during the evolution of parkinsonism syndromes (110 cases)].

Preparation of Biocompatible Structural Gradient Coatings on Pure Titanium

Preparation of Bioactive Hydroxyapatite on Pure Titanium

Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces

A novel multi-structural reinforced treatment on Ti implant utilizing a combination of alkali solution and bioactive glass sol

Preparation and bioactive surface modification of the microwave sintered porous Ti-15Mo alloys for biomedical application

Preparation of Dicalcium Phosphate Anhydrous (Monetite) Biological Coating on Titanium by Spray-Drying Method

Biomimetic Coating of Compound Titania and Hydroxyapatite on Titanium