Abstract:A titania (TiO2) - hydroxyapatite (HA) bi-layered material, with a target surface design, was obtained by means of a two-step process on the surface of Ti substrates with three different pristine morphologies and topographies. A dense, compact and crystalline titania inter-layer was obtained via Metal Organic Chemical Vapor Deposition, and a homogeneously spread discontinuous calcium phosphate ceramic (hydroxyapatite) top-layer, with particular chemical composition, crystallinity, and morphology, was deposited by means of spray pyrolysis. A final thermal treatment at 600 °C was found as the best compromise between an adequate crystallinity, bioactivity and composite material features. The novelty of this work is that this synergic two-step approach allows the co-existence of both TiO2 and HA ceramics on the implant surface. This can help in increasing the surface bioactivity and improving the short(HA)- and long(TiO2)-term implant service-life. The influence of the two-step modification process was investigated. Coated surfaces exhibited better electrochemical performances in artificial saliva and reduced metallic ion release; also the mechanical properties at the nano-scale level of the composite materials were improved thanks to the functionalization. The composite material wettability was also studied: the freshly prepared surfaces always showed hydrophilicity. However, in air environments, the wettability decreased with ageing time due to hydrocarbon contamination. Acellular in-vitro bioactivity of all species was tested evaluating the ability of the materials to form a bone-like apatite layer after immersion in Dulbecco's Phosphate Buffer Saline solution at 37 °C. The obtained results showed that a bone-like apatite layer was effectively formed on the two-step functionalized Ti substrates, giving significant results just after 30 min incubation time.

Bioactive Composite Coating on Titanium Implants for Hard Tissue Repair

Biomimetic Deposition of Apatite on Electrochemically Oxidized Titanium Substrates

Bioactive treatment of titanium surface using a H2O2/HCl solution

Apatite Layer-Coated Titanium for Use As Bone Bonding Implants

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

[Experimental Study of Fast Formation of Biomimetic Apatite Coatings on Pure Titanium Surface].

BIOCERAMIC COATINGS ON TITANIUM SURFACES

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Biomimetic Coating of Compound Titania and Hydroxyapatite on Titanium

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

In vivo and in vitro biological efficacy of double-layer coating of titanium with gelatin and calcium phosphate

Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces

Bioactivity of Metallic Biomaterials with Anatase Layers Deposited in Acidic Titanium Tetrafluoride Solution

Nanohydroxyapatite/Peptide Composite Coatings on Pure Titanium Surfaces with Nanonetwork Structures Using Oyster Shells

Preparation of Bioactive Hydroxyapatite on Pure Titanium

In Vitro Evaluation on Bone-Bonding of Chemically Modified Titanium

TiO2-HA bi-layer coatings for improving the bioactivity and service-life of Ti dental implants

Effect of Bioactivity of Surface Topography and Coating Forming by Infrared Light-Induced on Titanium for Bone Repair

Preparation of Biocompatible Structural Gradient Coatings on Pure Titanium

Bioactive macroporous titanium surface layer on titanium substrate

Development of Bioactive Ceramic Coating on Titanium Alloy substrate for Biomedical Application Using Dip Coating Method