Abstract:Fiber lasers are commonly used in many industrial applications, such as cutting, welding, marking, and additive manufacturing. In a fiber laser system, the driver of a pumping source using a laser diode (LD) module and its dynamic control capability directly affect the performance of the fiber laser system. The commercial design of pumping source drivers for high-power fiber lasers is mainly based on a linear-type DC power supply, which has two major drawbacks, i.e., lower efficiency and bulk. In this regard, this paper proposes for the first time a new design approach with a programmable switching mode laser diode driver using a power semiconductor device (PSD)-based full-bridge phase-shifted (FB-PS) DC-DC converter for driving a 200 W optical power laser diode module. In this paper, the characteristics of a laser diode module and the system configuration of the proposed laser diode driver are first introduced. Then, a current control scheme using the concept of phase angle shifting to achieve a fast dynamic current tracking feature is explained. The proposed current control technique with a fully digital control scheme is then addressed. Next, dynamic mathematical models of the laser diode driver system and controllers are derived, and the quantitative design detail of the controller is presented. To confirm the correctness of the proposed control scheme, a simulation study on a typical control case is performed in PSIM 9.1 software environment. To verify the effectiveness of the proposed LD driver, a digital signal processor is then used as the control core to construct a hardware prototype implementation for performing experimental tests. Results obtained from simulation and hardware tests show highly satisfactory driving performances in the laser diode's output current command tracking control.

DFB Laser Array Driver Circuit Controlled by Adjustable Signal

Design of an Autonomous and Controllable Laser Ranging System

Design of Focusing System in Laser Pattern Generator

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Design of Digital Adjustable Optical Power Control System of Laser Diode

Design and Implementation of a Power Semiconductor-Based Switching Mode Laser Diode Driver

A bipolar temperature controller with high precision for laser diode

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

High Precision Temperature Controller

High-Precision Semiconductor Laser Current Drive and Temperature Control System Design

A Digital Optical Phase-Locked Loop For Diode Lasers Based On Field Programmable Gate Array

A simple digital control system with field-programmable gate array for stabilization of CO2 laser output

A Portable Low-Power Integrated Current and Temperature Laser Controller for High-Sensitivity Gas Sensor Applications.

An Ultra-High Stability, Low-Noise Laser Current Driver with Digital Control

Ti6A14V Laser Alloying Process Control by Using a Self-Organizing Fuzzy Controller

Application Research of Piggyback Control Mode in the Temperature Controlling of Laser- Diode

Design of a hybrid adaptive fuzzy and neural network controller for nonlinear laser alloying process.

An Adjustable Amplitude And Pulse-Width Laser Modulation Driver With Active Feedback For Qkd Experiments

A Design of Temperature Adaptively Adjustable Driver for LD Array

Laser Distance Finder Based on FPGA and DDS

Enhanced Tuning Performance of In-Series REC-DFB Laser Array