Abstract:Absolute distance measurement with dual femtosecond comb lasers has advantages of wide-range, high-accuracy and fast speed. It combines time-of-flight and interferometric measurement. The novelty of ranging method leads to new challenges in designing the data acquisition and processing hardware system. Currently there are no available real-time data processing system for dual-comb ranging. This paper introduces our recent progress on designing and implementing such a platform. Our platform mainly contains four different function modules. First, a clock module that accept a 250MHz maximum reference clock input was introduced to generate the sample clock for A/D converter, and the module’s output clock can be delayed up to 20ns with a resolution of 714ps. Second, a high-speed data acquisition module with a 14-bit resolution and a 125 MSPS maximum sample rate was designed to convert the analog laser pulse signal to digital signal. Third, we built a real-time data processing module that allows an input of 16-bit data in the FPGA to calculate the distance from the digital signal within 83us. Finally, a data transmission module based on a 128MB DDR SDRAM and USB2.0 was added so that we can easily debug the platform in the PC. The performance of our system is evaluated in real-time. The test bench consists of two femtosecond laser sources, an optical fiber interferometer and our data processing system. The repetition frequencies of the two combs are around 50MHz, with frequency difference of 2.5kHz. The center wavelength of laser pulses is 1560nm. The target distance is from 0m to 3m. The experimental results show that our system can output measurement results at the rate of 2500 pts/s, and the measurement deviation is less than 10um.

Laser Distance Finder Based on FPGA and DDS

Design of an Autonomous and Controllable Laser Ranging System

A High-Precision Laser Displacement Measurement System

Design of pulse phase shift laser range finder

Design and implementation of embedded signal processing system based on pulsed laser ranging technology

Intelligent Measuring System for Performance Parameters of Laser Range Finder

Design and fabrication of a high-precision 360 laser receiver for leveling applications

Interference Peak Detection Based on Fpga for Real-Time Absolute Distance Ranging with Dual-Comb Lasers

Distance Measuring Using Single-Point Laser Triangulation System Design Based on CMOS

Research on 2d Laser Distance Sensor

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

Long distance high resolution FMCW laser ranging with phase noise compensation and 2D signal processing

Simulation of Real-Time Large-Scale Absolute Distance Measurement with a Pair of Femtosecond Frequency Comb Lasers

Real-time high-precision FMCW laser range extraction method based on a hardware multiplier array

Absolute distance meter without dead zone based on free-running dual femtosecond lasers

Design and Implementation of FPGA-based High-speed Phase Detector in Single-frequency Laser Interferometer

The Short-Range, High-Accuracy Compact Pulsed Laser Ranging System

Implementation of a Data Processing Platform for Real-Time Distance Measurement with Dual-Comb Lasers

High-precision Pulsed Laser Measuring Distance by Time Delay Method

Design of Intelligent Ultrasonic Power Source Based on FPGA

Inter-Satellite Integrated Laser Communication/Ranging Link with Feedback-Homodyne Detection and Fractional Symbol Ranging