Abstract:The study of optical microcavity sensors in current micro optical electro mechanical systems (MOEMS) devices is an important research direction in this field. This study investigates a new type of nanocavity temperature sensor based on the S-shaped metal-insulator-metal (MIM) and Bragg grating. The analysis of the original sensor model shows that the resonance wavelength of the proposed grating's reflection spectrum shifts to the long-wave direction with the change of refractive index. The value of the high refractive index sensitivity is 1960 nm/RIU, which is obtained near the Bragg resonance wavelength of 1950 nm, and the figure of merit (FOM) is 14.6. The structure is further optimized by adding nanocavity in the middle of the S-shaped MIM Bragg grating. Results show that the refractive index sensitivity is basically unchanged, but the corresponding FOM is 27.7, showing an improvement of 89.7%. The temperature sensor sensitivity is as high as 4.95 nm/degrees C, and the reflection spectrum resonance wavelength of the proposed grating shifts to the short-wave direction as the temperature changes. High sensitivity can be obtained when the Bragg resonance wavelength is long. Moreover, the Bragg wavelength has a good linear relationship with external physical parameters, such as refractive index and temperature. The findings of this study have certain theoretical and practical values in realizing high-precision, anti-harsh environment, and multi-sensor integrated MOEMS devices.

High Sensitivity Temperature Sensor Based on Cascaded Silicon Photonic Crystal Nanobeam Cavities

High Sensitivity Temperature Sensor with an Avoided-Crossing Based Selective-Filling High Birefringent Photonic Crystal Fiber Sagnac Interferometer.

Silicon Based Photonic Crystal Nanobeam Cavity with Polymer Cladding

High-Q and High-Sensitivity Photonic Crystal Cavity Sensor

Optical Temperature Sensor Based on Polysilicon Waveguides

Simultaneous Measurement of Refractive Index and Temperature Using Cascaded Side-Coupled Photonic Crystal Nanobeam Cavities

Temperature Sensor Cascading Reflective Fabry-Perot Cavity with Microring Resonator

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

Photonic Crystal Fibre Based High Temperature Sensor with Three-Beam Path Interference

Optical Multi-ring Cascade Cavity Temperature Sensor with Ultra-High Sensitivity

Refractive Index Insensitive Temperature Sensor Based On A Photonic Crystal Nanobeam Cavity

Sense High Refractive Index Sensitivity with Bragg Grating and MIM Nanocavity

High-sensitivity silicon photonic biosensors based on cascaded resonators

Temperature Insensitive Lower-Index-Mode Photonic Crystal Nanobeam Cavity

Side-coupled Nanoscale Photonic Crystal Structure with High-Q and High-Stability for Simultaneous Refractive Index and Temperature Sensing

Optical Sensors Based on Cascaded Micro-Ring Resonators with Thermo-Optical Tuning

High-sensitivity Transverse-Load and High-Temperature Sensor Based on the Cascaded Vernier Effect

Ultracompact High-Sensitivity Biochemical Sensor Built with Photonic Crystal Nanobeam Cavity

High-sensitivity Temperature Sensing by Employing an On-Chip High-Q PDMS-coated Toroidal Microcavity

Anti-External Interference Sensor Based on Cascaded Photonic Crystal Nanobeam Cavities for Simultaneous Detection of Refractive Index and Temperature