Abstract:Reflective imaging systems form an important part of photonic devices such as spectrometers, telescopes, augmented and virtual reality headsets or lithography platforms. Reflective optics provide unparalleled spectral performance and can be used to reduce overall volume and weight. So far, most reflective designs have focused on two or three reflections, while four-reflection freeform designs can deliver a higher light throughput (faster F-number) as well as a larger field-of-view (FOV). However, advanced optical design strategies for four-reflection freeform systems have been rarely reported in literature. This is due to the increased complexity in solution space but also the fact that additional mirrors hinder a cost-effective realization (manufacture, alignment, etc.). Recently, we have proposed a novel design method to directly calculate the freeform surface coefficients while merely knowing the mirror positions and tilts. Consequently, this method allows laymen with basic optical design knowledge to calculate 'first time right' freeform imaging systems in a matter of minutes. This contrasts with most common freeform design processes, which requires considerable experience, intuition or guesswork. Firstly, we demonstrate the effectiveness of the proposed method for a four-mirror high-throughput telescope with 250mm-focal-length, F/2.5 and a wide rectangular FOV of 8.5° x 25.5°. In a subsequent step, we propose an effective three-mirror but four-reflection imaging system, which consists of two freeform mirrors and one double-reflection spherical mirror. Compared with common three-mirror and three-reflection imagers, our novel multi-reflection system shows unprecedented possibilities for an economic implementation while drastically reducing the overall volume.

Design of freeform unobscured reflective imaging systems using CI method

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

Construction-iteration Method for the Design of Freeform Reflection System

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Automated design of freeform imaging systems

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Design of High Resolution Panoramic Endoscope Imaging System Based on Freeform Surface

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Design of reflective lens with Zernike polynomial free form surfaces

Design method of freeform off-axis three-mirror reflective imaging systems

Design of freeform imaging systems with linear field-of-view using a construction and iteration process.

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Design of Freeform Illumination Optics

Design of image-side telecentric freeform imaging systems based on a point-by-point construction-iteration process

Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

Design Method for Freeform Reflective-Imaging Systems with Low Surface-Figure-error Sensitivity

Freeform imaging system design with multiple reflection surfaces

Starting Configuration Design Method of Freeform Imaging and Afocal Systems with A Real Exit Pupil

Fast Automatic Design Method for Freeform Imaging Systems Through System Construction and Correction