Abstract:Traditional optical design methods require designer intervention in the system’s evolution from the starting point to the final design. Trial-and-error during design optimization improves system performance step by step but requires much time and effort. A new optical design framework, end-to-end fast automatic design, is proposed and achieved for the freeform reflective optics in this paper, which promotes a new optical design mode. Compared with the traditional mode through improving performance after each trial, an optical system with good image quality can be directly obtained in the end-to-end design process with simple input and no human involvement within a short time. If there is still the possibility for performance improvement of the obtained system, the designer can vary the input parameters repeatedly to obtain multiple systems with good image quality. Finally, the desired system is selected from these systems. Compared with the step-by-step trials in traditional optimization, this new optical design mode involves high-speed trials of the end-to-end automatic design process, reducing the dependence on experience and skill. In this paper, an end-to-end fast automatic design method for freeform imaging systems is developed based on a new design route. Using an initial plane system as an input, a freeform system with excellent image quality can be designed automatically within 1–2 min. After several trials of the end-to-end fast design process, three high-performance freeform systems are designed successfully that consider volume control, beam obscuration, and mirror interference.

Fast Automatic Design Method for Freeform Imaging Systems Through System Construction and Correction

Automated design of freeform imaging systems

Freeform Optical Design Mode Based on Fast Automatic Design Process

Optical design mode based on fast automatic design process for freeform reflective imaging systems with modest FOV

Freeform Optical Design of Beam Shaping Systems with Variable Illumination Properties.

Towards Automatic Freeform Optics Design: Coarse and Fine Search of the Three-Mirror Solution Space

Design of Freeform Illumination Optics

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Calculation of Aberration Fields for Freeform Imaging Systems Using Field-Dependent Footprints on Local Tangent Planes.

Design of freeform imaging systems with linear field-of-view using a construction and iteration process.

Fast Method for Designing Broadband Achromatic Diffractive Optical Elements.

Design Method of Freeform Off-Axis Reflective Imaging Systems with a Direct Construction Process.

A Design Method of the Distortionless Catadioptric Panoramic Imaging Based on Freeform Surface

High-performance Imaging with an Advanced Non-Imaging Lens Based on Full-Path Optical Diffraction Calculation in Two-Dimensional Space

Direct design of freeform surfaces and freeform imaging systems with a point-by-point three-dimensional construction-iteration method.

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Design Method for Freeform Reflective-Imaging Systems with Low Surface-Figure-error Sensitivity

Distortion correction for imaging on non-planar surface using freeform lens

Design of freeform unobscured reflective imaging systems using CI method

Design of image-side telecentric freeform imaging systems based on a point-by-point construction-iteration process

Starting Configuration Design Method of Freeform Imaging and Afocal Systems with A Real Exit Pupil