Preparation of a Macroporous CuAl2O4 Spinel Monolith and Its Rapid Selective Adsorption Towards Some Anionic Dyes

Xingzhong Guo,Pengan Yin,Wei Lei,Hui Yang

DOI: https://doi.org/10.1039/c7nj02279d

IF: 3.3

2017-01-01

New Journal of Chemistry

Abstract:Macroporous CuAl2O4 spinel, which was first synthesized, showed excellent selective adsorption performance towards some anionic dyes.

What problem does this paper attempt to address?

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Lei Xu,Anyun Zhang,Fengmei Zhang,Jiyong Liu

DOI: https://doi.org/10.1016/j.jhazmat.2017.04.038

IF: 13.6

2017-01-01

Journal of Hazardous Materials

Abstract:The effective removal of heavy metal 107Pd(II) from highly active liquid waste (HLW) is very valuable for reducing its hazardous and risk to public health and environment. For this purpose, a novel silica-bipyridine multidentate functional adsorbent was synthesized by vacuum infusing a new asymmetric N-donor ligand CA-MTBP (bipyridine derivative) into the macroporous SiO2-P support. SEM, N2 adsorption-desorption isotherms, TGA, XRD, FT-IR, 29Si solid-state NMR and XPS spectroscopy were utilized to systematically characterize the physicochemical properties of the adsorbent. The characterization results indicated that CA-MTBP was successfully immobilized onto the pores of SiO2-P by intermolecular interaction. Strong hydrogen-bonding interactions identified by single crystal structure of the ligand and 29Si NMR may play a key role in achieving this immobilization. TGA and TOC studies showed that CA-MTBP/SiO2-P had excellent thermal stability and highly HNO3 resistance. EDS and XPS investigations provided directly evidences for Pd(II) being selectively adsorbed onto the adsorbent. The adsorbent had excellent adsorption capability, fast adsorption kinetics and high selectivity for Pd(II) over other typical tested metals in HNO3 media.
Sol–gel Preparation of Hierarchically Porous Magnesium Aluminate (mgal2o4) Spinel Monoliths for Dye Adsorption

Xingzhong Guo,Pengan Yin,Kazuyoshi Kanamori,Kazuki Nakanishi,Hui Yang

DOI: https://doi.org/10.1007/s10971-018-4781-0

2018-01-01

Journal of Sol-Gel Science and Technology

Abstract:Hierarchically porous spinel-type binary metal oxide MgAl2O4 with cocontinuous skeletons and interconnected macropores has been synthesized by a facile sol–gel method accompanied by phase separation, in which poly (ethylene oxide) (PEO) works as phase separation inducer to form micrometer-scale phase-separated macrochannels at the same time of sol–gel transition. The obtained xerogels exhibit in the form of a monolith with well-defined macropores and cocontinuous dense skeletons by adjusting the amount of PEO. The xerogel and those heat-treated at or below 600 °C are amorphous, and heat-treatment at or above 700 °C allows the precipitation of complete crystalline MgAl2O4 spinel with a macropore size of 0.7–0.9 μm, a porosity of 60–70%, and a BET surface area of 40–80 m2 g−1, without spoiling the macrostructure of monoliths. Three anionic dyes and two cationic dyes are selected as targeted adsorbates to investigate the selective adsorption ability of a hierarchically porous MgAl2O4 spinel. The resultant MgAl2O4 spinel shows a high affinity and adsorption rate toward anionic dyes Congo Red, Methyl Orange, and Methyl Blue. The maximum adsorption capacity of MgAl2O4 spinel toward these three anionic dyes are 2721.6 mg g−1 for Congo Red, 2469.7 mg g−1 for Methyl Orange, and 6771.9 mg g−1 for Methyl Blue, respectively.
Preparation of Manganese Oxides-Modified Diatomite and Its Adsorption Performance for Dyes

Zhan Shulin,Lin Junxiong,Fang Minghui,Qian Xiaoqian

2010-01-01

Rare Metal Materials and Engineering

Abstract:The manganese oxides-modified diatomite adsorbent was prepared by in-situ method. The EDX, SEM and XRD techniques were employed to characterize the adsorbent. Its adsorption performance was studied by three kinds of dyeing wastewater. It shows that some hole sites with negative charge could be formed in the diatomite surface due to the NaOH pretreatment during the preparation, which was propitious to the dispersion of manganese oxides. The particle diameter of the composite adsorbent was about 11.23 mu m, and the spheric manganese oxides on the adsorbent were amorphous with 100 nm in diameter. The dye removal results show that the composite adsorbent has perfect adsorption performance for cationic dyes and reactive dyes.
Spinel Type CoFe Oxide Porous Nanosheets As Magnetic Adsorbents with Fast Removal Ability and Facile Separation

X. Ge,C. D. Gu,X. L. Wang,J. P. Tu

DOI: https://doi.org/10.1016/j.jcis.2015.05.013

IF: 9.9

2015-01-01

Journal of Colloid and Interface Science

Abstract:Adsorption is often time consuming due to slow diffusion kinetic. Sizing he adsorbent down might help to accelerate adsorption. For CoFe spinel oxide, a magnetically separable adsorbent, the preparation of nanosheets faces many challenges including phase separation, grain growth and difficulty in preparing two-dimensional materials. In this work, we prepared porous CoFe oxide nanosheet with chemical formula of Co2.698Fe0.302O4 through topochemical transformation of a CoFe precursor, which has a layered double hydroxide (LDH) analogue structure and a large interlayer spacing. The LDH precursor was synthesized from a cheap deep eutectic solvent (DES) system. The calcined Co2.698Fe0.302O4 has small grain size (10-20nm), nanosheet morphology, and porous structure, which contribute to a large specific surface area of 79.5m(2)g(-1). The Co2.698Fe0.302O4 nanosheets show fast removal ability and good adsorption capacity for both organic waste (305mgg(-1) in 5min for Congo red) and toxic heavy metal ion (5.27mgg(-1) in 30min for Cr (VI)). Furthermore, the Co2.698Fe0.302O4 can be separated magnetically. Considering the precursor can be prepared through a fast, simple, surfactant-free and high-yield synthetic strategy, this work should have practical significance in fabricating adsorbents.
Preparation of Three-Dimensionally Ordered Macroporous Spinel Li1.6mn1.6o4 and Adsorption Characteristics of Lithium Ion-Sieve

Lu Hong-Yan,Yang Li-Xin,Wu Sai-Xiang,Zhang Ling-Jun,Zhou Li,Liu Xiao-Li

2011-01-01

Abstract:Three-dimensionally ordered macroporous spinel lithium manganese oxide Li1.6Mn1.6O4 was fabricated directly by polymethyl methacrylate colloidal crystal template filled with the LiNO3, Mn(Ac)(2)center dot 4H(2)O and citric acid mixed solution and oxidation roasting in the air atmosphere. After the precursor was delithiated by 0.1 mol/L hydrochloric acid, three-dimensionally ordered macroporous lithium ion-sieve was obtained, whose macroporous diameter and pore wall thickness were about 240 and 50 nm, respectively. The X-ray diffraction results show that Li1.6Mn1.6O4, lithium ion-sieve and the lithium-adsorbed samples all keep spinel structure. The three-dimensionally ordered macroporous (3DOM) materials present the channel space connecting each other, which shortens the adsorption equilibrium time of Li+. The delithiation rate of precursor gets 95% at 80 degrees C, while the solution loss rates of manganese are less than 2.5% below 60 degrees C. Solution temperature has great influence on the exchange ability of Li+, raising temperature leads to the increase of Li+ and H+ reversible exchange degree, the Li+ maximum adsorption capacity is 56.7 mg/g, but the hydrogens in the manganese 16d octahedral defect position are difficult to be exchanged. The analyses of pH titration and distribution coefficient K-d indicate that the solid acid has a high selectivity of Li+ in the coexisting solution of Li+, Na+ and K+.
In-Situ Preparation of Magnetic Chitosan Nanoparticles in Microemulsion System and Their Adsorption Properties for Dyes

Limin Zhou,Jianping Xu,Zhirong Liu,Chao Shang,Guolin Huang

2012-01-01

Abstract:The magnetic chitosan nanoparticles(MCN) were in-situ prepared by adding the NaOH solution precipitant into a W/O microemulsion system containing cyclehexane/n-hexanol,chitosan,Fe2+/Fe3+ salts and Triton X-100.The MCN were then modified with ethylenediamine(EMCN) and used for the adsorption of Acid Orange 12(AO12) and Acid Orange 10(AO10).The adsorbents were characterized by TEM,XRD and FT-IR.The results show that EMCN are monodispersed,and have a particle size of 15 nm～40 nm and a saturation magnetization of 25.6 emu/g.The maximum adsorption occurred at pH 4.0 for AO12 and pH 3.0 for AO10,respectively.The adsorption was very quick with the equilibrium time of 40 min～60 min.The equilibrium data fitted well with Langmuir isotherm,and the saturation adsorption capacity was 2.81 mmol/g for AO12 and 1.82 mmol/g for AO10,respectively.The E values(14.95 kJ/mol～18.54 kJ/mol) calculated form D-R isotherm indicated that the chemisorption was predominant on the adsorption.The EMCN could be regenerated using NH4OH/NH4Cl solution(pH 10.0) as elution.
Spinel CuB 2 O 4 (B = Fe, Cr, and Al) Oxides for Selective Adsorption of Congo Red and Photocatalytic Removal of Antibiotics

Mengjun Han,Shifa Wang,Xiangyu Chen,Hao Liu,Huajing Gao,Xinxin Zhao,Fei Wang,Hua Yang,Zao Yi,Leiming Fang

DOI: https://doi.org/10.1021/acsanm.2c02349

IF: 6.14

2022-07-29

ACS Applied Nano Materials

Abstract:A polyacrylamide gel method has been used to synthesize spinel type nano-CuB2O4 with cubic phase (B = Al) and tetragonal phase (B = Cr and Fe). The phase structure, functional group information, and charge state characterization confirm that the CuAl2O4 oxides contain no impurities, while CuCr2O4 and CuFe2O4 contain CuO impurities. The CuAl2O4 oxides exhibit a small particle size of 25 nm, high optical band gap (E g) value, high adsorption capacity for the adsorption of Congo red dye, and high photocatalytic activity for the photocatalytic degradation of tetracycline hydrochloride (TCH), which are much better than those of the CuCr2O4 and CuFe2O4 oxides. The high adsorption capacity for the CuAl2O4 oxides can be ascribed to the larger zero charge point (pHPZC) values, unique crystal structure, pore filling, electrostatic interaction, and hydrogen bond force. Photocatalytic degradation of antibiotics by CuB2O4 (B = Al, Cr, and Fe) shows high selectivity and B ion and crystal structure dependencies. The CuAl2O4 oxides exhibit high photocatalytic activity for the photocatalytic degradation of TCH and oxycline hydrochloride (OCH) and poor photocatalytic activity for the photocatalytic degradation of metformin hydrochloride (MFH) and naproxen sodium (NPS). Cyclic stability tests and XRD results further confirm that CuAl2O4 oxide is recyclable and stable. The high photocatalytic activity of CuAl2O4 oxides was explained in terms of the synergetic effects of the optical absorption coefficient, specific surface area, crystal structure, adsorbed oxygen concentration, chemical structure of the antibiotic, and conduction band and valence band potentials. The trapping experiments confirmed that TCH photodegradation in this reaction system occurs via photogenerated holes (hVB +) and superoxide radicals (•O2 –).

materials science, multidisciplinary,nanoscience & nanotechnology
Green Synthesis and Influence of Calcined Temperature on the Formation of Novel Porous Diatomite Microspheres for Efficient Adsorption of Dyes

Shu Yan,Wenlong Huo,Jinlong Yang,Xiaoyan Zhang,Qinggang Wang,Lu Wang,Yiming Pan,Yong Huang

DOI: https://doi.org/10.1016/j.powtec.2018.01.090

IF: 5.64

2018-01-01

Powder Technology

Abstract:The novel porous diatomite microspheres were prepared by spray drying and subsequent calcination. Effects of calcined temperatures on the microstructure, specific surface area and adsorption properties of the microspheres were investigated systematically. Results showed that the porous microspheres exhibited spherical characteristic with both macropore and mesoporous features. The phases of the microspheres kept amorphous at 800 degrees C and crystallized into crystobalite at 1000 degrees C. The microspheres after calcined at 600 degrees C showed removal efficiency of 95.6% with the dosage of 20 g/L under the starting concentration of 100 mg/L The adsorption process of methylene blue onto microspheres followed the pseudo-second-order kinetic model and Langmuir equation. The dye solutions could be easily filtrated by the microsphere layers and became colorless. It suggested that the porous diatomite microspheres had potential application in dyeing wastewater filtration and adsorption treatment. (C) 2018 Elsevier B.V. All tights reserved.
LIMN2O4 SPINEL DIRECT SYNTHESIS AND LITHIUM ION SELECTIVE ADSORPTION

Qin-Hui Zhang,Shao-Peng Li,Shu-Ying Sun,Xian-Sheng Yin,Jian-Guo Yu

DOI: https://doi.org/10.1016/j.ces.2009.06.045

IF: 4.7

2010-01-01

Chemical Engineering Science

Abstract:The cubic phase LiMn2O4 spinel is synthesized via a directly soft chemistry method via hydrothermal reaction of Mn(NO3)2, LiOH and H2O2 at 383K for 5–10h, more favorable to control the nanocrystalline structure with well-defined pore-size distribution and high surface area than traditional solid-phase reaction at high temperature. Further, the 1D MnO2 nanorod ion-sieves with lithium ion selective adsorption property is prepared by the acid treatment process to completely extract lithium ions from the LiMn2O4 lattice. The effects of hydrothermal conditions on the nanostructure, chemical stability and ion-exchange property of the LiMn2O4 spinel and MnO2 ion-sieve are examined via powder X-ray diffraction (XRD), N2 adsorption–desorption at 77K, high-resolution transmission electron microscopy (HRTEM), selected-area electron diffraction (SAED) and lithium ion selective adsorption measurements. The results show that the 1D MnO2 nanorods might be utilized in lithium extraction from aqueous environment including brine, seawater and waste water.
A novel mesoporous carbon nanospheres-based adsorbent material with desirable performances for dyes removal

Xialan Zhang,Xin Wang,Ting Cheng,Qilang Lin

DOI: https://doi.org/10.1016/j.molliq.2023.123091

IF: 6

2023-09-18

Journal of Molecular Liquids

Abstract:Nowadays, the reduction of dye contaminants in the aquatic environment has attracted widespread research attention. In this work, a novel mesoporous carbon nanospheres (MCNs)-based material as an adsorbent for dye removal was achieved by the carbonization of a composite of sucrose and aluminum sulfate without involving any hazardous activators. The as-obtained MCNs were analyzed by TG, XRD, FESEM, TEM, Raman, BET and XPS, meanwhile the batch experiments of Congo red (CR), Malachite green (MG) and Methylene blue (MB) on the MCNs were conducted to explore the impact of adsorption conditions on the adsorption process, respectively. Results show that the MCNs exhibit a uniform spherical morphology as well as partially graphitic structure with a large surface area of 449.25 m 2 g -1 , a relatively narrow pore size distribution and a high pore volume of 0.57 cm 3 g -1 . The unique porous structure of the MCNs endows it with high adsorption capabilities for dyes, including CR (1726.60 mg g -1 ), MG (980.55 mg g -1 ) and MB (708.82 mg g -1 ), suggesting its high adsorption capability for both anionic and cationic dyes. Meanwhile, the adsorption process is demonstrated to follow the Langmuir model and pseudo-second-order kinetic model, respectively, and the main adsorption mechanisms may involve pore filling, π-π conjugation, electrostatic attraction and hydrogen bonding. Furthermore, the as-synthesized adsorbent displays good recyclability performance for remaining relatively high sorption performance even after five regeneration cycles.

chemistry, physical,physics, atomic, molecular & chemical
Preparation of Porous ZnAl2O4 Spinel Monoliths Through Sol-Gel Route Accompanied with Phase Separation

Yin Pengan,Lei Wei,Yang Hui,Guo Xingzhong

2018-01-01

Rare Metal Materials and Engineering

Abstract:Zinc chloride and aluminum chloride (AlCl3 center dot 6H(2)O, Aladdin, 97%) were chosen as zinc and aluminum precursors, a mixture of distilled water (H2O) and ethanol was used as the solvents, propyleneoxide was used to immediate the gelation process, and poly(ethylene-oxide) was used as a phase-separation inducer. All the chemical reagents were used as received. Porous ZnAl2O4 spinel monolith has been successfully prepared via the sol-gel route accompanied with phase separation. The as-prepared samples were characterized by XRD, DTA, SEM and FT-IR. The effect of heat-treatment on the structure and phase transition were discussed. The results show that phase separation can be induced by PEO, thus obtaining porous monoliths with an interesting pore structure with co-continuous solid skeletons and well-controlled pores. The as-prepared samples shows a phase of ZnAl-LDHs. The ZnAl2O4 crystalline phase is obtained after the decomposition of -OH and carbonate anions during the heat treatment at 600 degrees C in air.
Preparation and Lithium Adsorption Properties of Low-Dimensional Cubic Li4mn5o12 Nanostructure

Sun Shu-Ying,Zhang Qin-Hui,Yu Jian-Guo

DOI: https://doi.org/10.3724/sp.j.1077.2010.00626

IF: 1.292

2010-01-01

Journal of Inorganic Materials

Abstract:Pure beta-MnO2 oxide was synthesized by hydrothermal synthesis of MnSO4 center dot H2O and (NH4)(2)S2O8. Spinel-type Li4Mn5O12 precursors were synthesized via low temperature solid-phase reaction. Furthermore, MnO2 ion-sieves with Li+ selective adsorption property were prepared by the acid treatment process to completely extract Li+ from the spinel Li4Mn5O12 precursor. The effects of hydrothermal and solid-phase reaction process on the nanostructure, chemical stability and ion-exchange property of the ion-sieve material were examined with XRD, HRTEM, SAED, and Li+ selective adsorption measurements. The results show that Li4Mn5O12 precursor and final MnO2 ion-sieve are effectively controlled within low-dimensional structure, indicating that low temperature solid-phase reaction is more favorable to control the nanocrystalline structure than traditional high-temperature calcination process. The Li+ selective adsorption capacity is improved remarkably to 6.6 mmol/g at equilibrium and about 5.0 mmol/g at the initial Li+ concentration of only 5.0 mmol/L, which is significant for lithium extraction from aqueous solutions with very low lithium content.
Preparation, characterisation, and growth mechanism of mesoporous petal-like MgAl2O4 spinel

Qian Wu,Guo Feng,Feng Jiang,Lifeng Miao,Weihui Jiang,Jian Liang,Jianmin Liu,Jingang Tan,Xiaojun Zhang,Xinbin Lao

DOI: https://doi.org/10.1016/j.ceramint.2021.10.110

IF: 5.532

2022-02-01

Ceramics International

Abstract:Petal-like MgAl2O4 spinel was successfully prepared using a novel inorganic salt-assisted nonhydrolytic sol-gel method without a template and was employed as absorbent in the removal of the Congo red (CR). The effects of the inorganic salt type, heat-treatment temperature, and dwelling time on the morphology and phase composition of the petal-like MgAl2O4 spinel were investigated systematically. Results indicated that when Na2MoO4 was employed as the salt and the heat-treatment temperature and dwelling time were 600 °C and 5 h, respectively, the as-obtained petal-like MgAl2O4 spinel exhibited a highly uniform morphology with a thickness of 19–23 nm and a length of 240–280 nm. The N2 adsorption-desorption results revealed that the petal-like MgAl2O4 exhibited a large BET specific surface area of 161 m2g-1 with a pore volume of 0.24 cm3g-1. The growth mechanism of the petal-like MgAl2O4 is believed to be the formation of a two-dimensional layered network structure by the coordination between the condensation product of the magnesium aluminium bimetallic alkoxides and the ions in the salt. The as-prepared MgAl2O4 petal exhibited an effective adsorption capacity toward anionic dyes CR. The maximum adsorption capacity of CR onto the mesoporous MgAl2O4 petal was found to be 572.01 mg/g, it is showed the petal-like MgAl2O4 exhibit huge potential of application in the field of environmental remediation.

materials science, ceramics
Microwave synthesis of amino-functionalized MCM-41 from coal gasification fine slag for efficient bidirectional adsorption of anionic and cationic dyes

Zhen Chai,Bin Liu,Peng Lv,Yonghui Bai,Jiaofei Wang,Weiguang Su,Xudong Song,Guangsuo Yu,Guangyu Xu

DOI: https://doi.org/10.1016/j.chemosphere.2024.141229

IF: 8.8

2024-01-30

Chemosphere

Abstract:Coal based solid waste has been recognized as a sustainable raw material for the preparation of high added value materials for wastewater treatment . In this paper, a preparation route was designed for the rapid, efficient, and low-cost preparation of MCM-41 zeolite using coal gasification fine slag as raw material. Functionalization modification of MCM-41 was carried out by grafting amino groups on its surface to improve its application performance. Moreover, the prepared functionalized material is used for bidirectional adsorption of anionic and cationic dyes. The experimental results indicate that MCM-41 zeolite with highly ordered pore structure was rapidly prepared using the advantages of fast heating and strong permeability of microwave synthesis method, with a specific surface area of up to 862.03 m 2 /g. Amine functionalized MCM-41 exhibits strong adsorption capacity for both cationic and anionic dyes, with maximum adsorption capacities for methylene blue and Congo red being 292.40 mg/g and 354.61 mg/g, respectively. The study of adsorption kinetics and adsorption mechanism indicate that the adsorption process is mainly controlled through chemical adsorption, including electrostatic attraction, hydrogen bonding, and π-π interactions. The results of this study will provide useful references for the use of coal based solid waste to prepare functional materials for the treatment of organic wastewater.

environmental sciences
Tuning the Interfacial Properties of Spinels to Improve the Antimony Adsorption Ability

Yulu Ai,Can Wu,Guo Liu,Hongxi Wang,Chaojiang Yao,Huabin Li,Zhike Li

DOI: https://doi.org/10.1021/acs.langmuir.1c00978

IF: 3.9

2021-08-13

Langmuir

Abstract:Structure and interfacial properties are important factors that affect a spinel's adsorption performance. In this article, by changing the water content in a precursor during synthesis, the interfacial properties of normal and inverse spinels were tuned to improve Sb adsorption. The results showed that changing the water content did not alter the crystal structure of synthesized zinc ferrite (ZnFe2O4) and cobalt ferrite (CoFe2O4), but it had a significant effect on the crystallite size and the number of surface hydroxyl groups. For normal spinel ZnFe2O4 and inverse spinel CoFe2O4, the crystallite size decreased while the surface hydroxyl groups increased when the water content gradually increased from 1 to 8 mL. Spinels with smaller crystallite size and more surface hydroxyl groups enhanced Sb adsorption. The adsorption capacity of ZnFe2O4 and CoFe2O4 for low concentrations of Sb(V) increased from 8.45 and 10.64 mg/g to 15.05 and 17.00 mg/g, respectively. This work has greatly improved the adsorption capacity of spinel materials through a simple tunable method and is expected to provide new ideas for the interfacial tuning of spinel materials, which shows great potential applications for wastewater treatment.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.1c00978.XRD patterns of ZnFe2O4 and CoFe2O4 nanoparticles synthesized by adding 20 mL of H2O in the precursor solution; GC–MS chromatograms of the solutions of ZnFe2O4 and ZnFe2O4; XPS spectra of ZnFe2O4 and CoFe2O4; and Langmuir and Freundlich isotherm parameters for Sb(V) adsorption (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science
Preparation of Mesoporous Al-MCM-41 from Natural Palygorskite and Its Adsorption Performance for Hazardous Aniline Dye-Basic Fuchsin

Yuan Guan,Shaomang Wang,Xin Wang,Cheng Sun,Yongbo Wang,Lingjie Hu

DOI: https://doi.org/10.1016/j.micromeso.2016.04.025

IF: 5.876

2016-01-01

Microporous and Mesoporous Materials

Abstract:A promising mesoporous Si-Al material, Al-MCM-41 was successfully prepared by alkali calcination leaching of natural palygorskite, and sequent hydrothermal synthesis coupled with calcination. The morphology, structure, surface area and pore-size distribution of the material were characterized by scanning electron microscopy, small-angle X-ray diffraction and N-2 adsorption-desorption isotherms. The Al-MCM-41 possessed better crystallinity and larger specific surface area with CTAB/SiO2 mass ratio of 0.1:1, pH of 5, crystallization temperature of 110 degrees C, crystallization time of 12 h and calcination of 550 degrees C for 5 h. The Al-MCM-41 was used as an adsorbent for the removal of hazardous aniline dye-basic fuchsin from water. Adsorption kinetics and isotherms analysis indicated that adsorption of basic fuchsin onto Al-MCM-41 followed pseudo-first-order model and Langmuir adsorption isotherm. In addition, intra-particle diffusion was rate determining step of the adsorption process. The results demonstrated that the as-synthesized Al-MCM-41 had potential applications in the treatment of waste water. (C) 2016 Published by Elsevier Inc.
Novel Fe 3 O 4 –poly(methacryloxyethyltrimethyl ammonium chloride) adsorbent for the ultrafast and efficient removal of anionic dyes

Bo Zhou,Yuling Tang,Liming Zhao,Lijun Guo,Jianfei Zhou

DOI: https://doi.org/10.1039/d0ra09296g

IF: 4.036

2021-01-01

RSC Advances

Abstract:The Fe 3 O 4 –pDMC magnetic adsorbent was synthesized, and the mechanism of its rapid and efficient removal of two anionic dyes (acid orange 7 and direct blue 15) was studied.

chemistry, multidisciplinary
High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent

Hui Wang,Kun Dai,Houle Xiang,Jingwei Kou,Han Guo,Hanjie Ying,Jinglan Wu

DOI: https://doi.org/10.1016/j.ijbiomac.2024.135005

2024-08-22

Abstract:Dyes are indispensable for the rapid development of society, but untreated dye wastewater can threaten human health. In this study, an adsorbent (SA/SL/CCS/PEI@MNPs) was synthesized by one-pot method using magnetic nanoparticles (MNPs), sodium alginate (SA), sodium lignosulfonate (SL), carboxylated chitosan (CCS) and polyethyleneimine (PEI). The adsorbent was mesoporous micrometer-sized particles with pore size of 34.92 nm, which was favorable for dynamic column experiments. SA/SL/CCS/PEI@MNPs possessed pH-responsive performance. Under acidic condition, the maximum adsorption capacities for anionic dyes (tartrazine, reactive black-5, indigo carmine) reached >550 mg/g. Under alkaline condition, those for cationic dyes (methylene blue, methyl violet, neutral red) exceeded 1900 mg/g. The function of the various modifiers was investigated. The results indicated that the incorporation of SL, CCS and PEI was able to provide plenty of sulfonate, carboxylate and amino/imine reactive groups so that adsorption capacities of dyes were improved. The adsorption mechanism was explored by FTIR and XPS. At the same time, the adsorption mechanism was more deeply analyzed using molecular dynamics simulations and radial distribution function. It was demonstrated that the dyes adsorption on the SA/SL/CCS/PEI@MNPs was mainly due to electrostatic attraction and π-π interaction. In addition, the adsorbent had good reusability, and the removal still reached over 90 % after five cycles. In conclusion, the adsorbent displayed a broad prospect for the adsorption of organic dyes.
Synthesis and Characterization of Monolithic ZnAl2O4 Spinel with Well-Defined Hierarchical Pore Structures Via a Sol-Gel Route

Xingzhong Guo,Pengan Yin,Wei Lei,Hui Yang,Kazuyoshi Kanamori,Kazuki Nakanishi

DOI: https://doi.org/10.1016/j.jallcom.2017.08.172

IF: 6.2

2017-01-01

Journal of Alloys and Compounds

Abstract:Hierarchically porous ZnAl2O4 spinel monolith derived from ionic precursors has been successfully prepared via the sol-gel route accompanied by phase separation in the presence of poly (ethylene oxide) (PEO) and propylene oxide (PO). Appropriate amounts of PEO as a phase-separation inducer and PO as a gelation mediator allow the formation of the xerogel with bicontinuous macrostructure and a monolithic shape. The macropore size of the resultant dried gel is mainly distributed in the range of 0.2-1 mu m, and the whole porosity is about 65%. The dried gel is constructed by crystalline Zn-Al hydrotalcite, becoming amorphous after heat-treated at 300-500 degrees C in air, and is further transformed into single phase ZnAl2O4 spinel with plate-like shape at 600 degrees C. The macroporous structure is well maintained while the porosity increases to 75% and the surface area rises to 109 m(2) g(-1) after heat-treatment. (C) 2017 Elsevier B.V. All rights reserved.
The Ultrahigh Adsorption Capacity and Excellent Photocatalytic Degradation Activity of Mesoporous CuO with Novel Architecture

Jing Ni,Jianfei Lei,Zhaowu Wang,Lanlan Huang,Hang Zhu,Hai Liu,Fuqiang Hu,Ting Qu,Huiyu Yang,Haiyang Yang,Chunli Gong

DOI: https://doi.org/10.3390/nano13010142

IF: 5.3

2022-12-28

Nanomaterials

Abstract:In this paper, mesoporous CuO with a novel architecture was synthesized through a conventional hydrothermal approach followed by a facile sintering procedure. HR-TEM analysis found that mesoporous CuO with an interconnected pore structure has exposed high-energy crystal planes of (002) and (200). Theoretical calculations indicated that the high-energy crystal planes have superior adsorption capacity for H+ ions, which is critical for the excellent adsorption and remarkable photocatalytic activity of the anionic dye. The adsorption capacity of CuO to methyl orange (MO) at 0.4 g/L was approximately 30% under adsorption equilibrium conditions. We propose a state-changing mechanism to analyze the synergy and mutual restraint relation among the catalyst CuO, H+ ions, dye and H2O2. According to this mechanism, the degradation rate of MO can be elevated 3.5 times only by regulating the MO ratio in three states.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

Preparation of a Macroporous CuAl2O4 Spinel Monolith and Its Rapid Selective Adsorption Towards Some Anionic Dyes

Preparation and Characterization of a Novel Macroporous Silica-Bipyridine Asymmetric Multidentate Functional Adsorbent and Its Application for Heavy Metal Palladium Removal.

Sol–gel Preparation of Hierarchically Porous Magnesium Aluminate (mgal2o4) Spinel Monoliths for Dye Adsorption

Preparation of Manganese Oxides-Modified Diatomite and Its Adsorption Performance for Dyes

Spinel Type CoFe Oxide Porous Nanosheets As Magnetic Adsorbents with Fast Removal Ability and Facile Separation

Preparation of Three-Dimensionally Ordered Macroporous Spinel Li1.6mn1.6o4 and Adsorption Characteristics of Lithium Ion-Sieve

In-Situ Preparation of Magnetic Chitosan Nanoparticles in Microemulsion System and Their Adsorption Properties for Dyes

Spinel CuB 2 O 4 (B = Fe, Cr, and Al) Oxides for Selective Adsorption of Congo Red and Photocatalytic Removal of Antibiotics

Green Synthesis and Influence of Calcined Temperature on the Formation of Novel Porous Diatomite Microspheres for Efficient Adsorption of Dyes

LIMN2O4 SPINEL DIRECT SYNTHESIS AND LITHIUM ION SELECTIVE ADSORPTION

A novel mesoporous carbon nanospheres-based adsorbent material with desirable performances for dyes removal

Preparation of Porous ZnAl2O4 Spinel Monoliths Through Sol-Gel Route Accompanied with Phase Separation

Preparation and Lithium Adsorption Properties of Low-Dimensional Cubic Li4mn5o12 Nanostructure

Preparation, characterisation, and growth mechanism of mesoporous petal-like MgAl2O4 spinel

Microwave synthesis of amino-functionalized MCM-41 from coal gasification fine slag for efficient bidirectional adsorption of anionic and cationic dyes

Tuning the Interfacial Properties of Spinels to Improve the Antimony Adsorption Ability

Preparation of Mesoporous Al-MCM-41 from Natural Palygorskite and Its Adsorption Performance for Hazardous Aniline Dye-Basic Fuchsin

Novel Fe 3 O 4 –poly(methacryloxyethyltrimethyl ammonium chloride) adsorbent for the ultrafast and efficient removal of anionic dyes

High adsorption capacities for dyes by a pH-responsive sodium alginate/sodium lignosulfonate/carboxylated chitosan/polyethyleneimine adsorbent

Synthesis and Characterization of Monolithic ZnAl2O4 Spinel with Well-Defined Hierarchical Pore Structures Via a Sol-Gel Route

The Ultrahigh Adsorption Capacity and Excellent Photocatalytic Degradation Activity of Mesoporous CuO with Novel Architecture