Abstract:In this paper, we propose a novel acquisition system, which can flexibly adjust the sampling rate according to different sampling requirements. First, we propose a sampling model and conduct feasibility verification experiments on it. The experimental results show that the sampling principle has excellent sampling function. Subsequently, we successfully implemented the system. The system combines the differential comparator of FPGA with the characteristics of TDC, which makes full use of the hardware resources of FPGA to realize efficient digital sampling and reconstruction of unknown signals. Among them, the TDC we designed has a time error of less than 100ps at sampling rates lower than 50MSps. the sampled signal is transmitted via Ethernet, and the measured on-chip data link throughput rate reaches 600 Mbps. the sampled information is decoded, fitted and reconstructed in the host computer. In addition, we have thoroughly studied the factors affecting the sampling quality in this acquisition method and summarized the sampling laws after acquiring multiple signals. To ensure the minimum distortion rate, we choose the threshold signal amplitude as 0-5 times of the highest amplitude of the sampled signal, and select the frequency as 10-30 times. Regarding the system resource consumption, the LUT utilization rate is 12.22%, the Slice utilization rate is 23.37%, and the overall design power consumption is 2.094 W. Finally, after a comprehensive evaluation of the performance of the system, the results show that the system has a small error, high precision, and high-speed dynamic sampling function. Synthesizing this paper, the system shows good engineering practicability and feasibility in the field of measurement.

Waveform Digitization Utilizing Switched-Capacitor Arrays

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Parasitic Elimination Bootstrapped Switch and a Fast Settling Residual Amplifier for High-Speed and High-Resolution Pipelined ADC

Application of the DRS4 Chip for GHz Waveform Digitizing Circuit

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique

Non-Ideal Effects of Mos Capacitor in A Switched Capacitor Waveform Recorder Asic

An 8-Bit 100-Ms/s Digital-To-Skew Converter with 200-Ps Range for Time-Interleaved Sampling

A New Kind of Switched Capacitor Array

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

High Performance Data Acquisition Methods Based on Waveform Digitization

Dynamic Sample Rate Acquisition System Based on Time-to-digital Converter Technology

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

Design and Offline Processing of an Ultrafast Digitizer Based on Internal Cascaded DRS4

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

Novel Calibration Method for Switched Capacitor Arrays Enables Time Measurements With Sub-Picosecond Resolution

A 16-bit 18-MSPS flash-assisted SAR ADC with hybrid synchronous and asynchronous control logic

A 16bit 1ms/s High-Bit Sampling SAR ADC with Improved Binary-Weighted Capacitive Array

A 6b 800ms/s SAR ADC with Speed-Enhanced SAR Logic and Grouped DAC Capacitors

An 8-Bit 1-Gs/s Flash-Assisted Time-Interleaved SAR ADC

A 12 Bit 500 MS/s Sub-2 Radix SAR ADC for a Time-Interleaved 8 GS/s ADC in 28 nm CMOS

A 1.8 V 1.1 MS/s 96.1 Db-Sfdr Successive Approximation Register Analog-to-digital Converter with Calibration