Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Frequency Control and Pre-Tuning of A Large Aperture 500 Mhz 5-Cell Superconducting Rf Cavity

Studies of LL-type 500MHz 5-cell superconducting cavity at SINAP

Studies of an Ll-Type 500 Mhz 5-Cell Superconducting Cavity at Sinap

Great progress in developing 500 MHz single cell superconducting cavity in China

Control and Measurement System for the Tuning of A Pefp Low-Beta Superconducting Rf Cavity

The Design of A Five-Cell High-Current Superconducting Cavity

Design and Simulation of 500 MHz Single Cell Superconducting RF Cavity for SILF

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Tuner control system of spoke012 SRF cavity for C-ADS injector I at IHEP

Design of the 500 MHz 2-Cell Superconducting Cavity for the SILF

RF Design of 650-Mhz 2-Cell Cavity for CEPC

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

SINAP surface preparation processing for 500MHz superconducting cavity

New Results of Development on High Efficiency High Gradient Superconducting RF Cavities

Effective medium temperature baking of 1.3 GHz single cell SRF cavities

Coaxial multi-mode cavities for fundamental SRF research in an unprecedented parameter space

Development of a 166.6 MHz β = 1 higher-order-mode-damped superconducting cavity

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

Development and Measurements of A Technological Cavity for 350mhz High Current Proton Rfq

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure