Abstract:Conventional methods for hot extrusion of magnesium (Mg) alloy sheets have limitations for microstructure improvement and mechanical property enhancement. Co-extrusion of Mg alloy with an Al alloy core provides an opportunity for refining the grain size and improving basal texture. This study introduces a novel severe plastic deformation (SPD) method, Direct Extrusion-Continuous Shear (DE-CS), utilizing 6063 Al alloy as the core to fabricate innovative Mg/Al clad composite sheets. Monolithic Mg sheets (non-co-extruded condition) are extruded under identical conditions for comparison. By evaluating the microstructure and mechanical properties of AZ31 Mg alloy under co-extrusion and non-co-extrusion conditions, the positive effect of Mg-Al composite billet co-extrusion on AZ31 Mg alloy is established. The grain refinement effect in co-extruded samples is superior, enhancing plasticity without significant reduction in tensile strength. The microstructure evolution and dynamic recrystallization (DRX) behaviour of AZ31 Mg alloy during co-extrusion were analyzed comprehensively. The results indicate that, in the initial stages of deformation, various variants of {10-12} extension twins (ETs) play a crucial role in refining the original grains, forming initial [10-10]//ED fiber texture components alongside other non-basal components. Upon entering the shear deformation (SD) zone, deformed twins disappear, and small dynamically recrystallized (DRXed) grains emerge along boundaries of coarse deformation grains and within the grains. Strong shear deformations and compressive stress from transverse direction (TD) induce intensified prismatic and pyramidal slip, promoting continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). CDRX predominantly affects elongated deformed grains, forming an [10-10]//ED fiber texture through high-energy grain boundary segmentation. Subsequently, compatible stress increases due to the activity of non-basal slip dislocation and the reduction in grain boundary (GB) size. DDRX emerges as the dominant mechanism, generating randomized [10-10]//ED fiber and non-fiber textures within parent grains and at boundaries.

Effective strains caused by different process conditions of extrusion-shear and its influences on the microstructures of AZ31 magnesium alloy

Effects of Extrusion–Shear Process Conditions on the Microstructures and Mechanical Properties of AZ31 Magnesium Alloy

A special extrusion-shear manufacturing method for magnesium alloy rods based on finite element numerical simulation and experimental verification

Unveiling the microstructure evolution and deformation mechanisms of micro-alloying Mg-1.5Zn-0.5Zr-0.5Sr alloy via extrusion-shearing

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Microstructure, Mechanical Properties, and Texture Evolution of Mg–Zn–Y–Zr Alloy Fabricated by Hot Extrusion–shearing Process

Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process

Effects of Direct Extrusion Process on Microstructure, Texture Evolution and Yield Strength of Magnesium Alloy Az31

Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process

Fabrication of fine-grained, high strength and toughness Mg alloy by extrusion−shearing process

Microstructures and Corrosion Behavior of AZ61 Magnesium Alloy Prepared by Extrusion–Shear with Different Die Channel Angles

Numerical simulation of the residual stress in the Mg-5Zn-3.5Sn-1Mn-0.5Ca-0.5Cu alloy with different extrusion parameters

Anisotropy and Deformation Mechanisms ofAs-Extruded Mg-3Zn-1Y Magnesium AlloyUnder High Strain Rates

Influence of extrusion method on the microstructure and mechanical properties of formed magnesium alloy tubes

Effect of Extrusion Deformation on Microstructures and Properties of AZ31 Magnesium Alloy

Deformation behaviour, microstructure evolution and dynamic recrystallization mechanism of AZ31 magnesium alloy under co-extruded by Mg-Al composite billet

Evolution of Microstructure and Tensile Properties of Extruded Mg-4Zn-1Y Alloy

Effect of grain size distribution and texture on the cold extrusion behavior and mechanical properties of AZ31 Mg alloy

Dynamic tensile properties and microstructural evolution of extruded EW75 magnesium alloy at high strain rates

High Strain Rates Deformation Behavior of an As-Extruded Mg–2.5Zn–4Y Magnesium Alloy Containing LPSO Phase at High Temperatures

Effects of High Strain Rate on Mechanical Properties of As-extruded AZ61 Magnesium Alloy