Abstract:With the purpose of further investigating the influence of aging on the tensile behaviors of hydroxyl-terminated polybutadiene (HTPB) propellant at low temperatures under dynamic loading, uniaxial tensile stress responses of thermal accelerated aged propellant samples at different temperatures (223–298 K) and strain rates (\(0.40\mbox{--}42.86~\mbox{s}^{-1}\)) were obtained through the use of a new INSTRON testing machine. And scanning electron microscope (SEM) was employed to analyze the microscopic damage of HTPB propellant under the test conditions. Test results indicate that aging can significantly affect the characteristics of the stress-strain curves, mechanical properties and fracture mechanisms of HTPB propellant at low temperatures under dynamic loading. There are three regions in the tensile stress-strain curves of aged propellant when deforming at lower temperatures and the highest strain rate, however, there are five ones for unaged propellant. At lower temperatures and higher strain rates, the strain at maximum tensile stress of the propellant decreases more obviously after aging. Moreover, the variation of mechanical parameters for HTPB propellant with aging time are highly complex due to the occurrence of oxidative cross-linking during aging and the distinct changes of the fracture mechanisms. These variation were reasonably well described with linear model and the improved exponential model in this investigation. The fracture mechanism of aged propellant can change from dewetting, matrix tearing and AP particle fracture to only AP particle fracture with increasing strain rate for the entire test temperature range, and the strain rate for this transition is all at \(4.00\mbox{--}14.29~\mbox{s}^{-1}\). In addition, the microscopic damage of HTPB propellant becomes more severe with the thermal aging time rising, however, this effect is weaker at higher strain rates after long-time thermal aging. Finally, the master curves of typical mechanical parameters for aged HTPB propellant were constructed according to the time-temperature superposition principle (TTSP).

The experimental study of the thermal ageing combustion property of the modified double base propellant and its lifetime calculation

Experimental Technique for Aging Kinetics of Crude Terephthalic Acid Particles

Test Study on Storage Aging Properties of HTPB Propellants

Experimental Investigation on the Influence of Confining Pressure on Thermal Aged CMDB Propellant

Molecular Dynamics Study on Aging Mechanism of HTPB Propellants

Storage-life prediction and relationship between maximum elongation and stabilizer depletion for a composite modified double base propellant (CMDB) propellant

Degradation Laws and Characteristic Parameters of Performance of Gun Propellant in Storage

Experimental Research on Combustion Characteristics of Bitumen

Study on the influence of moisture content on thermal stability of propellant.

Research on the Aging Properties of HTPB Propellant under Vacuum

Effect of Accelerated Cyclic Aging on the Ballistic Properties of Composite Solid Propellant

Evolution of structural damage of solid composite propellants under slow heating and effect on combustion characteristics

Tensile Behaviors of Thermal Aged HTPB Propellant at Low Temperatures under Dynamic Loading

Reaction Model for the Aging and Shelf‐Life Prediction of Double‐Base Propellant SF‐3

Experimental research on combustion of modification Yangquan coal

Analysis of thermal stability for slow burning propellant based on isothermal testing: Self‐accelerating decomposition temperature (SADT) calculation and validation

Combustion model for catalyzed double-base propellants

Thermal Decomposition Characteristics of Double-base Propellant and Multi-nitrate Ester Propellant

A One-Dimensional Model for the Aging and Damage Effects on the Response of Composite Double-Base Propellants

Research on the Thermal Aging Performance of a GAP-Based Polyurethane Elastomer

Reliability Calculation of Solid Propellant Based on Accelerated Degradation Test