Abstract:As a composite energetic material composed of filler and matrix, the mechanical properties of HTPB propellants change constantly due to the aging of each component and component interfaces during long-term storage. However, the study of a single component or performance parameter limits disclosure of the complex aging mechanism and mechanical property evolution. Therefore, based on accelerated thermal aging experiments, this study integrated gas detection, contact angle testing, in situ loading experiments, digital image correlation numerical analysis, and all-atom molecular dynamic simulations to explore the underlying mechanism of structural morphology and mechanical property changes during propellant aging. The results showed that the aging reaction was dominated by degradation chain breaking in the early stage and oxidative crosslinking in the later stage. Degradation chain breaking enhanced interfacial bonding between the two phases, while oxidative crosslinking deteriorated interfacial bonding. Compared with lossless specimens, short-term thermal aging weakened the strength of the matrix and enhanced bonding interfaces. During in situ loading, interfacial pore expansion and matrix damage and fracture occurred simultaneously and the matrix became the key damage source. However, with the extension of thermal aging time, the strength of the matrix increased, bonding interface weakened, and bonding interfaces became a weak point of loading. This made the high-strain area change from the matrix at the initial loading stage to the bonding interface and the damage of the bonding interface caused whole fracture of the specimen. The external loading resulted in the rearrangement of interfacial molecular chains, change of molecular spacing, and initiation and expansion of micropores between molecular chains. The tractor-separation curve conformed to the exponential cohesion model and the damage mode of the interface layer changed between adhesion and cohesion due to thermal aging.

A One-Dimensional Model for the Aging and Damage Effects on the Response of Composite Double-Base Propellants

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Experimental Investigation on the Influence of Confining Pressure on Thermal Aged CMDB Propellant

A constitutive model of solid propellants considering aging and confinement pressure

Multiscale damage evolution and fracture for thermal aging energetic material based on mesoscopic observation and molecular dynamics simulation

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Storage-life prediction and relationship between maximum elongation and stabilizer depletion for a composite modified double base propellant (CMDB) propellant

Research on the Aging Effects of Adhesive and Composites on the Degradation Mechanism of Composite Adhesive Joints in Thermal-Humidity-Cycles for Automobiles

Comprehensive Aging Model Coupling Chemical and Mechanical Degradation Mechanisms for NCM/C6-Si Lithium-Ion Batteries

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

A Nonlinear Viscoelastic Constitutive Model for Solid Propellant with Rate-Dependent Cumulative Damage

A nonlinear viscoelastic constitutive model with damage and experimental validation for composite solid propellant

Modeling of Load Responses and Aging of High Strength Fibers Considering UV-radiation

Research on the statistical damage constitutive model for composite solid propellant

Damage softening constitutive model of HTPB propellant for biaxial loading

Mechanical Behaviors and Constitutive Relations under wide strain rate range for CMDB propellant

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Molecular Dynamics Study on Aging Mechanism of HTPB Propellants

Review of multi‐scale mechanical behavior research on composite solid propellants based on data‐driven approach

Research progress in dynamic mechanical behavior of solid propellants

Storage Life of Particle-Filled Polymer Composites Considering Aging Effects