Abstract:<p>In this study, inductance-type electrical conductivity measurement (IECM) was performed to study the electrical conductivity of different formulations of cement slurry. Low-field nuclear magnetic resonance, in situ X-ray micro-tomography, and environmental scanning electron microscopy were used to investigate the effects of the microstructure, pore characteristics, and pore water of cement slurry on its electrical conductivity. Experimental results showed that the pore characteristics and ion concentration governed the initial electrical conductivity of fresh cement slurries. The sedimentation stability of fresh cement slurries increased the number of interconnected pores, and the initial electrical conductivity increased from 16.8 mS/cm to 19.4 mS/cm. When the CaCl<sub>2</sub> accelerator content was 2 wt%, the initial electrical conductivity of the fresh cement slurry increased to 26.9 mS/cm, while the electrical conductivity rapidly decreased with the formation of hydration products. With increasing hydration time, large amounts of hydration products were formed in the pores, which changed the microstructure and pores of the cement slurry from connected large volume pores to many small volume pores and subsequently changed the distribution of pore water. The experimental results revealed that the connected porosity of the cement slurry was proportional to the electrical conductivity. An exponential relationship was found between the electrical conductivity and the evaporable water content, whereas a linear relationship was found between the electrical conductivity and the free water content.</p>

INTERPRETATION OF MICROSTRUCTURE DEVELOPMENT OF CEMENTITIOUS MATERIALS IN EARLY AGES WITH ELECTRICAL RESISTIVITY MEASUREMENT

Interpretation of Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Critical Features of Microstructure Development of Early-Age Cement Paste Revealed by Non-Contact Electrical Resistivity Measurement

Determining Porosity and Pore Network Connectivity of Cement-Based Materials by a Modified Non-Contact Electrical Resistivity Measurement: Experiment and Theory

Correlation of Mechanical and Microstructure Development of Early-Age Concrete by Electrical Resistivity Measurement

Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement

A Mathematical Model for the Electrical Resistivity of Cement Paste at Early Ages Considering the Partially Saturated State

Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Prediction of Effective Chloride Diffusivity of Cement Paste and Mortar from Microstructural Features

Correlating the Chloride Diffusion Coefficient and Pore Structure of Cement-Based Materials Using Modified Noncontact Electrical Resistivity Measurement

Characterization of Fresh Scc Properties with Electrical Resistivity

Investigation of the water absorption of porous aggregates from cement paste by electrical resistivity measurement

FRACTAL ANALYSIS OF STRESS-DEPENDENT DIFFUSIVITY OF POROUS CEMENTITIOUS MATERIALS

EXPERIMENTAL STUDY ON THE CHLORIDE DIFFUSION OF CONCRETE BASED ON ITS PORE STRUCTURE

Assessment of Electrical Resistivity and Oxygen Diffusion Coefficient of Cementitious Materials from Microstructure Features

A new method for predicting compressive strength of cement-based materials

Effects of microstructure and pore water on electrical conductivity of cement slurry during early hydration

STUDY ON THE EARLY-AGE MICRO-PROPERTIES OF CONCRETE USING ELECTRICAL RESISTIVITY METHOD

Gas Permeability and Electrical Conductivity of Structural Concretes: Impact of Pore Structure and Pore Saturation

Experimental analysis on the relationship between pore structure and capillary water absorption characteristics of cement‐based materials