Abstract:Oil-loaded polymer composites have become a research focus in tribology due to the good environmental stability and excellent performance. Usually, it is necessary to endow the polymer with a porous structure to facilitate lubricating oil storage. However, most methods require complex operating steps, making it difficult to control the complex shape of materials, and excessive pores often lead to an imbalance between the oil storage and retention rates. At the same time, the mechanical properties of the material can also be negatively affected. Developing a simple synthesis method to obtain oil-loaded polymer composite materials with good self-lubricating and mechanical properties still faces challenges. Herein, a one-pot synthesis method for oil-loaded self-lubricating polymers was proposed, which embeds the porous silica nanoparticles loaded with lubricating oil into the polymer and uses vat photopolymerization-based technologies to construct the polymer with various complex and delicate structures. After a series of treatments, such as photocuring and cleaning, an oil-loaded polymer-based composite material with good self-lubricating performance was prepared. Benefiting from the rich mesoporous pore structure of mesoporous silica, high specific surface area of 467 m 2 g -1 , and pore volume of 1.06 cm 3 g -1 , the oil content and retention rate of the composite materials are at a high level. In addition, by combining oil-loaded mesoporous silica nanoparticles with 3D printing, controllable preparation of complex shapes of self-lubricating composite materials has been achieved. During the friction performance testing process, the oil-loaded particles in the polymer composite can continuously provide lubricating oil on the friction surface, thus making the friction coefficient and wear rate reduced by 85.7% and 97.7%.

Preparation and oil lubrication of polyvinylidene fluoride (PVDF) nanospheres

Polyolefin nanometer compound material and its preparation technology

Effect of Lubricating Condition on Tribological Properties of Nano-SiO2 Filled Polyamide Composite

Friction-induced Lubricating Nanocoatings of Main-Chain Thermotropic Liquid Crystalline Polymer

Investigation of the Mechanisms for Stable Superlubricity of Poly(vinylphosphonic Acid) (PVPA) Coatings Affected by Lubricant

Preparation of Fe_3O_4 Nanopieces and Its Tribological Property in Liquid Paraffin

Rationalizing the Dependence of Poly (Vinylidene Difluoride) (PVDF) Rheological Performance on the Nano-Silica

The preparation of PVDF/clay nanocomposites and the investigation of their tribological properties

Preparation, Characterization, and Lubrication Performances of Water-Based Nanolubricant for Micro Rolling Strips

Preparation and Tribological Behavior of a Lubricating Oil Additive Containing Fluoborate Nanoparticles

Tribological Enhancement Effect of Main-Chain Thermotropic Liquid Crystalline Polymer

Preparation, characterization and tribological application of nickel nanopieces

Structural, thermal, and tribological properties of poly(vinylidene fluoride)/nano-TiO2 composites prepared by dry-mixing and hot-press technique

Synthesis and biochemical evaluation of des-vinyl secologanin aglycones with alternate stereochemistry.

Tribological property of dendritic fibrous nano silica composite particle as lubricant additive

Preparation of superhydrophobic surfaces and slippery liquid-infused porous surfaces based on core-cross-linked nanostructured materials obtained by living coordination block copolymerization through PISA process

Preparation and Tribological Properties of Self-Lubricating Epoxy Resins with Oil-Containing Nanocapsules

Effect of MMT, SiO2, CaCO3, and PTFE nanoparticles on the morphology and crystallization of poly(vinylidene fluoride)

Tribological behavior of 3D printed nanofluid reinforced photosensitive self-lubricating polymer materials

A Strategy to Improve Tribological Performances of Solvent-Based Phenol−formaldehyde Resin by Using Oil-Containing Nanocapsules

Preparation of hydrophilic and fouling resistant poly(vinylidene fluoride) hollow fiber membranes