Abstract:ZnO nanoparticle surface‐modified by diisooctyl phosphate (P204) was prepared by liquid‐phase in situ surface modification technique with zinc acetate as the raw material, P204 as the modifier and anhydrous ethanol as the solvent. The morphology and microstructure of the P204‐ZnO nanoparticle were characterised by transmission electron microscopy, X‐ray diffraction and Fourier transform infrared spectrometry. Its thermal stability was evaluated by thermogravimetric analysis; and its tribological properties as the additive in alkylnaphthalene were evaluated with an SRV‐5 friction and wear tester in reciprocal sliding mode. The results show that the as‐prepared P204‐ZnO nanoparticle has an average particle size of about 4 nm and a P204 content of about 42% (mass fraction); and the surface modifier is grafted onto the surface of ZnO nanoparticle by physical adsorption. With a mass fraction of 0.5% in alkylnaphthalene base oil, P204‐ZnO nano‐additive can mildly reduce the friction coefficient and drastically reduce the wear rate of the steel–steel sliding pair. This is due to the formation of the composite tribofilm via the adsorption and deposition of the nano‐additive on rubbed steel surfaces as well as the tribochemical reactions of the modifier P204 yielding phosphate and of steel substrate yielding iron oxides. The as‐formed composite tribofilm with a thickness of about 20 nm, consisting of phosphate and iron oxides as the binder as well as deposited ZnO nanoparticle as the filling phase, is responsible for the excellent friction‐reducing and antiwear abilities of P204‐ZnO nano‐additive for the steel sliding contact.

Preparation of Fe_3O_4 Nanopieces and Its Tribological Property in Liquid Paraffin

Exploring the Effect of Nanoparticle Size on the Tribological Properties of Sio2 / Polyalkylene Glycol Nanofluid under Different Lubrication Conditions

Preparation, characterization and tribological application of nickel nanopieces

Effect of the Particle Size on Tribological Properties of Nanometer Fe3O4 as Lubricating Oil Additives

Effect of copper oxide@boron nitride nanosheet hybrid nanocomposite on tribological properties of paraffin liquid

Tribological Behavior of Fe3o4/Mos2 Nanocomposites Additives in Aqueous and Oil Phase Media

Preparation and Tribological Properties of Graphite Nanosheets As Additive in Liquid Paraffin

Preparation, Characterization, and Lubrication Performances of Water-Based Nanolubricant for Micro Rolling Strips

Size Effects of SiO2 Nanoparticles As Oil Additives on Tribology of Lubricant

Preparation,Characterization of Oil-soluble Copper Nanoparticles and the Tribological Property as Additive in SF15W/40 Lubricating Oil

Preparation and Tribological Behavior of a Lubricating Oil Additive Containing Fluoborate Nanoparticles

Preparation of Diisooctyl Phosphate‐Modified Ultra‐Small Zinc Oxide Nanoparticle and Investigation of Its Tribological Properties as Additive in Alkylnaphthalene

Tribological Performance of Nanocomposite Carbon Lubricant Additive

The Tribological Mechanism of Cerium Oxide Nanoparticles as Lubricant Additive of Poly-Alpha Olefin

Friction‐Reducing and Anti‐Wear Mechanism of BP/Nano‐Fe3O4 Nanocomposite as a Lubricant Additive in Soybean Oil

Study on the Performance of Different Crystal Forms Nano MoS2 as Lubricant Additives in Reducing Wear and Friction

Preparation and tribological properties of self‐lubricating epoxy resin composites with oil‐containing carbon‐based nanocapsules

A novel route to the synthesis of an Fe3O4/h-BN 2D nanocomposite as a lubricant additive

An Investigation on Tribological Properties of Graphite Nanosheets As Oil Additive

The Application of Nano-MoS2 Quantum Dots as Liquid Lubricant Additive for Tribological Behavior Improvement

An Investigation on Tribological Properties and Lubrication Mechanism of Graphite Nanoparticles as Vegetable Based Oil Additive