Abstract:In the current research, strong strain-hardening capability in 1045 carbon steel was achieved by cold rolling and heat treatment of the lamellar structure. After 60% cold rolling, the proeutectoid ferrite and pearlite were severely elongated along the rolling direction. Cementite layers with brittle nature were fragmented under the action of stress and also by shear band formation during rolling. The lamellar heterogeneous microstructure of the heat-treated samples was formed by the proeutectoid ferrite as the soft domain and the pearlite as the hard domain. Increasing the heat treatment duration promoted the spheroidization transformation of cementite, and the spheroidization degree of cementite increased. With the increase in the time of heat treatment, the number of recrystallized grains is increased. Heat treatment led to weakening the deformation texture (⟨100⟩‖ND or θ fiber) and strengthening the recrystallization texture (⟨110⟩‖ND or ζ fiber). The heat-treated steels revealed an average microhardness value much higher than its macrohardness due to changes in the texture of ferrite grains. Heat treatment decreased the strength and hardness, and increased the ductility and toughness of steel compared to the cold-rolled sample owing to the annihilation of dislocations and the strengthening transition from strain hardening to grain refinement. The heat-treated samples exhibited a wider range of uniform plastic deformation and a larger strain hardening rate than the cold-rolled sample owing to the occurrence of the recovery of strain hardening rate phenomenon. The appropriate collocation of the fine spherical cementite and the soft/hard domains (with a large difference in mechanical properties) was beneficial to obtaining excellent strength-ductility balance in plain medium carbon steel. After heat treatment, the extent of ductile fracture considerably increased. With increasing the time of heat treatment from 1 to 3 h, the number of lamellar dimples decreased owing to the creation of more fine spherical cementite.

The Spheroidizing Tendency and Spheroidization Mechanism of 75cr1 Steel

Subcritical Spheroidization of Medium-Carbon 50CrV4 Steel

Behavior in Spheroidizing Annealing and Mechanical Properties of Medium Carbon Steel

Spheroidization heat treatment and intercritical annealing of low carbon steel

Microstructural Evolution and Mechanical Properties of 6cr13 Martensitic Stainless Steel Subjected to Cold Rolling and Heat Treatments

Effect of Spheroidizing Annealing Process on Microstructure and Properties of Quenching and Tempering 60Cr16MoMA Martensitic Stainless Steel

Importance of cold rolling and tempering on the microstructure evolution, precipitation behavior and mechanical responses of 9Cr3Co3W1Cu ferritic/martensitic steel

Evaluation of effect of spheroidization heat treatment on mechanical properties via small punch test

Effect of Isothermal Annealing on Spheroidization of Carbides in GCr15 Steel

Effect of Spheroidizing Annealing on the Carbide Precipitation Behavior of Cr-Mo-V-W Hot Work Die Steels

Effects of deformation and addition of aluminium on spheroidisation of high-carbon-bearing steel

Strong strain-hardening capability in plain carbon steel through cold rolling and heat treatment of lamellar structure

Spheroidizing Process and Mechanical Properties of Ultra-High Carbon Steel

Tailoring Strength and Ductility of a Cr-Containing High Carbon Steel by Cold-Working and Annealing

Dynamic Spheroidization Mechanism and Its Orientation Dependence of Ti-6Al-2Mo-2V-1Fe Alloy during Subtransus Hot Deformation

Effects of Annealing Process on Microstructure and Mechanical Properties of Hot Rolled Medium Carbon Steel Plate

Achieving Fine-Grained Microstructure and Superior Mechanical Property in a Plain Low-Carbon Steel Using Heavy Cold Rolling Combined with Short-Time Heat Treatment

Effect of Warm Rolling Temperature on the Microstructure and Texture of Microcarbon Dual-Phase (DP) Steel

SPHEROIDIZING ANNEALING TREATMENT OF 60 STEEL COLD-DRAWN WIRE

Analysis of Microstructure and Mechanical Properties of 30CrMo Steel During Annealing After Cold Rolling

Analysis of Reasons for Straightening Fracture of 65Mn Steel Sheet after Spheroidizing Annealing in Metallurgical Saw Blade