Novel Narrow-Band Blue-Emitting Cs3Zn6B9O21:Bi3+phosphor with Superior Thermal Stability

Mengyu Guan,Wei Wang,Wei Yan,Guogang Li

DOI: https://doi.org/10.1039/d0ce00893a

IF: 3.756

2020-01-01

CrystEngComm

Abstract:A novel Bi3+-doped CsZn6B9O21blue phosphor shows an extraordinary narrow-band emission with a FWHM of only 50 nm and excellent thermal stability.

What problem does this paper attempt to address?

Novel narrow-band blue-emitting Cs3Zn6B9O21:Bi3+ phosphor with superior thermal stability

Mengyu Guan,Wei Wang,Wei Yan,Guogang Li

DOI: https://doi.org/10.1039/d0ce00893a

IF: 3.756

2020-01-01

CrystEngComm

Abstract:A novel Bi3+-doped CsZn6B9O21 blue phosphor shows an extraordinary narrow-band emission with a FWHM of only 50 nm and excellent thermal stability.
A novel blue emitting phosphor Ca1- ySryScBO4:Bi3+ with zero-thermal quenching for multi-scenario application

Zekang Yan,Panlai Li,Jie Gong,Mengdi Liu,XiuXiu Feng,Ting Zhang,Xiaojie Li,Dongxu Guo,Hao Suo,Zhijun Wang

DOI: https://doi.org/10.1039/d3dt03734g

2024-02-13

Abstract:In recent years, Bi3+ activated phosphors have received a lot of attention from researchers; however, the performance and application areas of phosphors are yet to be developed. In this work, a series of CaScBO4(CSBO):xBi3+ phosphors were successfully prepared using a high-temperature solid-state method. Under UV excitation, blue light emission was achieved at 430 nm with a quantum yield of 91%, and at 423 K, the emission intensity retained 82.8% of the original intensity at 298 K. By crystal field engineering, the substitution of Sr2+ at the Ca2+ site enhances the temperature stability of the material, and at 423 K, 473 K and 573 K, the samples maintain 104%, 103% and 85% of the emission intensity at room temperature, respectively. It indicates that the cation substitution causes the increase in the oxygen vacancy concentration, and the oxygen vacancy defect compensates the energy lost in electrons at high temperature, producing resistance to anti-TQ performance. Finally, a blue-violet LED was fabricated by using the phosphor and an ultraviolet LED chip, and white LEDs (CCT = 4683 K, Ra = 89.7) were obtained by co-packaging this phosphor with commercial phosphors and a UV chip. Importantly, the great potential of this phosphor in the field of plant lighting and biocontrol can be demonstrated.
Structure and Luminescence Properties of Bi3+ Activated Ca12Al14O32Cl2 Phosphors

Zhigang Yang,Zhengyan Zhao,Yan Wen,Yuhua Wang

DOI: https://doi.org/10.1016/j.jallcom.2013.01.020

IF: 6.2

2013-01-01

Journal of Alloys and Compounds

Abstract:Bi3+ doped Ca12Al14O32Cl2 series were successfully synthesized by conventional solid-state reaction method and their luminescence properties have been investigated in detail. Crystallographic parameters of the refinement structure with cubic space group I-43d were obtained by XRD refinement as a=12.0183(3)Å and V (cell volume)=1735.93(1)Å3. The resulting phosphors absorb ultraviolet (UV) light (240–400nm) and show a single intense broad emission band in the wavelength range of 400–600nm with maximum intensity at 483nm. The Commission Internationale de 1’Eclairage (CIE) chromaticity coordinates are about x=0.185, y=0.306. Thus, the novel light blue-emitting phosphor Ca12Al14O32Cl2:Bi3+ could be potentially applied in UV white light-emitting diodes.
Superior Thermally-Stable Narrow-Band Green Emitter from Mn2+-doped Zero Thermal Expansion (ZTE) Material

Wei Wang,Hang Yang,Meiqian Fu,Xinyang Zhang,Mengyu Guan,Yi Wei,Chun Che Lin,Guogang Li

DOI: https://doi.org/10.1016/j.cej.2021.128979

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Thermal quenching is still a pivotal challenge for phosphor materials in white light emitting diodes lighting applications. Herein, we propose an effective strategy to design a near zero-thermal-quenching green emission in zero-thermal-expanding Zn4B6O13 host based on unique 3D isotropic cage structure. The integrated emission intensity of Zn4B6O13:Mn2+ could maintain 103% of initial intensity at 150 degrees C and 98% at 250 degrees C under blue light excitation. During the low-frequency vibrations, the unchanged bonds and angles induce the zero thermal expansion, and the unaffected lattice and coordination environment contribute the nearly unchanged emission intensity during the heating process. In addition, an efficient self-reduction of activators in the studied system is ascribed to vacancy and interstitial oxygen defects act as donors to provide electrons. This work initiates a novel strategy to construct thermally-stable and self-reductive phosphors for multiple optical applications.
Novel Highly efficient Bi3+-activated phosphor for warm WLED

Yonghui Xu,Shuwen Yin,Chuansheng Zhong,Liang Zhou,Hongpeng You,xiudi wu,xibao zhang

DOI: https://doi.org/10.1039/d3tc01396k

IF: 6.4

2023-05-20

Journal of Materials Chemistry C

Abstract:In this paper, a novel Bi3+-activated Ca2LuZrScAl2GeO12 (CLZSAG) phosphor with a garnet structure was prepared by the high temperature solid-state method. There are two kinds of luminescent centers in CLZSAG:Bi3+ phosphor, which give a blue emission under 365 nm excitation and a rare near-ultraviolet emission with a narrow band (FWHM=34 nm) under 290 nm excitation. The combination of structure and luminescence reveals that the Bi3+ ions occupy the sites of the LuO8 and ScO6 polyhedrons with different local coordination environments, leading to the two different luminescence behaviors. In addition, the prepared phosphors also have excellent thermostability (I423 K/298 K = 80%), and high quantum efficiency of 72% and 60% under 290 and 365 nm excitation, respectively. Since the absorption band of the phosphor in the UV-visible region can match well with the commercial 365 nm chips, a high-performance WLED device with a high color rendering index (Ra=98.5) and low correlated color temperature (CCT=4455 K) was obtained by combining commercial phosphors Lu-YAG:Ce3+, CaAlSiN3:Eu2+ and samples of CLZSAG:Bi3+ phosphor with 365 nm chips. Our results demonstrate the CLZSAG:Bi3+ has great potential application in WLED device.

materials science, multidisciplinary,physics, applied
A Highly Efficient Narrow-Band Blue Phosphor of Bi3+-activated Cubic Borate Ba3Lu2B6O15 Towards Backlight Display Applications

Shangwei Wang,Haiyan Wu,Yufan Fan,Qi Wang,Tao Tan,Ran Pang,Su Zhang,Da Li,Lihong Jiang,Chengyu Li,Hongjie Zhang

DOI: https://doi.org/10.1016/j.cej.2021.134265

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:Developing innovative efficient phosphors featured with a narrow-band emission is essential for present white light-emitting diodes (wLEDs) towards high-performance liquid-crystal display (LCD) backlights applications, especially for Bi3+-activated phosphors. Herein, we synthesized a near-ultraviolet (n-UV) excitable narrow-band blue-emitting Ba3Lu2B6O15:Bi3+ (BLB:Bi3+) phosphor. It exhibits a narrow band emission (full-width at half maximum, FWHM = 35.5 nm), high color purity of 97.76%, surprisingly high internal quantum efficiency (IQE) which reached up to 90.6%, excellent thermal stability (85%@150 degrees C of the integrated emission intensity at room temperature) and reversibility and high consistency. The outstanding photoluminescence properties of Bi3+ are attributed to a highly symmetrical crystal field environment and tightly connected polyhedral network of Ba3Lu2B6O15. In addition, the energy level scheme is constructed from the calculated electronic structure to explore the difference in luminescence stability of Ce and Bi doped BLB phosphors. The pc-wLED device fabricated using commercial green beta-Sialon:Eu2+, red K2SiF6:Mn4+, and as-prepared blue BLB:Bi3+ phosphor on a 365 nm n-UV chip covered 90.06% of the color space of National Television System Committee (NTSC) standard, suggesting great potential for industrial applications as LCD backlighting.
A Novel Narrow-Band Blue-Emitting Phosphor with High Efficiency and Thermal Stability for WLEDs and FEDs

Qiang Zhang,Xin Ding,Haoyang Wang,Bin Liu,Yuhua Wang

DOI: https://doi.org/10.1039/d3tc03420h

IF: 6.4

2023-10-17

Journal of Materials Chemistry C

Abstract:For white light-emitting diodes (WLEDs), comparing with the method of yellow-emitting Y3Al5O12: Ce3+ phosphor pumped by a blue LED chip, tricolor phosphors combined with near-ultraviolet (n-UV) LED chip have been regarded as a better candidate to improve the output-light performances and avoid the severe blue-light hazard. Yet, the high-grade phosphors with strong absorption in the n-UV region, high efficiency and thermal stability are extremely scarce. Inspired by mineral prototype strategy and substitution engineering, a novel Eu2+-doped Na3KMg6ZnP6O24 phosphor has been desired and developed for the first time. Its crystal structure, luminescent properties, potential application for WLEDs and cathodoluminescent properties have been studied systematically. The phosphor shows strong response to the irradiation of n-UV light and emits bright blue light peaking at 444 nm with a FWHM of 53 nm. The optimal Na3KMg6ZnP6O24: 0.02Eu2+ sample has a high quantum efficiency of 90.2%. Interestingly, the phosphor displays zero-thermal quenching behavior, which is extremely required for high-power WLEDs. The fabricated WLED lamp can exhibit superior electroluminescence properties by using the as-prepared Na3KMg6ZnP6O24: Eu2+ phosphor as a blue-emitting component. Furthermore, the phosphor can generate stable blue light under the bombardment of electron beam. All the results suggest that the obtained phosphor can be promising in developing both WLEDs and FEDs. This work provides a new insight to desire novel luminescent materials with excellent performances.

materials science, multidisciplinary,physics, applied
Air stable and highly efficient Bi 3+ -doped Cs 2 SnCl 6 for blue light-emitting diodes

Yue Yao,Si-Wei Zhang,Zijian Liu,Chun-Yun Wang,Ping Liu,Lan Ma,Guodan Wei,Feiyu Kang

DOI: https://doi.org/10.1039/d1ra03622j

IF: 4.036

2021-01-01

RSC Advances

Abstract:A Bi 3+ -doped Cs 2 SnCl 6 exhibits photoluminescence at around 456 nm and a photoluminescence quantum yield of 31%. The blue LED based on the Bi 3+ -doped Cs 2 SnCl 6 phosphor exhibits a long life of 120 hours and a CIE color coordinates of (0.14, 0.11).

chemistry, multidisciplinary
Preparation and Luminescence Properties of Broadband Orange-Emitting Persistent ScBaZn3GaO7:Bi3+ Phosphor

Shulian Liu,Mingwei Fu,Peng Qiao,Yingguang Li,Degang Deng,Youjie Hua,Shiqing Xu,Hongping Ma

DOI: https://doi.org/10.1021/acs.inorgchem.4c02379

2024-08-23

Abstract:This article describes a new kind of afterglow material, ScBaZn3GaO7:Bi3+, which was synthesized through a high-temperature solid-phase method. Its crystal structure, photoluminescent characteristics, and afterglow characteristics were studied and analyzed. Upon excitation at 344 nm, ScBaZn3GaO7:Bi3+ exhibits broadband emission with a central wavelength located at 571 nm (fwhm = 172.98 nm). The sample exhibits an internal quantum efficiency of 65.1%. The bright yellow persistent luminescence of the ScBaZn3GaO7:Bi3+ sample was observed after 365 nm irradiation. Thermoluminescence spectroscopy revealed four primary traps within ScBaZn3GaO7:Bi3+, with depths of 0.676, 0.794, 0.882, and 0.972 eV. The traps located at energy levels of 0.676 and 0.794 eV were identified as the key contributors to the sample's afterglow. Finally, the ScBaZn3GaO7:Bi3+ sample was combined with a UV-LED chip to fabricate a high-power warm white-light-emitting diode (WLED) device, indicating the potential application prospect of ScBaZn3GaO7:Bi3+ phosphor in single-phase warm WLEDs.
Ultra-narrow band blue-emitting Ba5SiO4Cl6: Eu2+ phosphors with excellent thermal stability

Jiangcong Zhou,Yiqing Lai,Xiaotian Huang,Hande Chen

DOI: https://doi.org/10.1007/s00339-019-2799-y

2019-07-16

Applied Physics A

Abstract:The narrow band phosphors with excellent thermal stability have received growing attention from academic and industrial researchers. In this work, a novel Ba5SiO4Cl6: Eu2+ phosphor was prepared via solid phase reaction. Their crystal structure, phase composition, morphology and optical performance containing photoluminescence (PL) emission, PL excitation and temperature-dependence PL spectra were systematically analyzed. Compared with commercial BaMgAl10O17: Eu2+ blue phosphor, the as-obtained Ba5SiO4Cl6: Eu2+ phosphor displays a narrower band blue emission (λem = 440 nm) with a full width at half maximum of 32 nm under the near ultraviolet light excitation and an excellent thermal stability for 83.3% of the initial intensity at 150 °C. The quantum yield of the Ba4.98Eu0.02SiO4Cl6 phosphors was estimated to be as high as 57.2%. Finally, a LED device coupling UV-chip (400 nm) with Ba5SiO4Cl6: Eu2+, (Sr, Ba)2SiO4: Eu2+, (Sr, Ca)AlSiN3: Eu2+ phosphors display attractive optical performance with LE = 45 lm/W, CCT = 3407 K and Ra = 94. Therefore, there are good reasons for believing that the Ba5SiO4Cl6: Eu2+ phosphor will be a market prospect phosphor for the application of lighting and display.
Narrow-Band Deep-Blue Emission and Superior Thermal Stability of Fluoroaluminate Phosphor Based on Tungsten Bronze-Type Mineral Structure

Rui Lu,Jianfeng Sun

DOI: https://doi.org/10.3390/ma16145053

2023-07-17

Abstract:Screening novel narrow-band phosphors inspired by natural mineral structures is urgently demanded for improving the performance of phosphor-converted light-emitting diodes. In this work, a novel narrow-band deep-blue-emitting tungsten bronze-type KCaAl2F9:Eu2+ phosphor with superior thermal stability is successfully synthesized. Structural analysis shows that the representative KCaAl2F9:0.013Eu2+ phosphor crystallizes in an orthorhombic space group C2221 with a rigid network. The rigid [AlF6]3- octahedrons are linked together by sharing corners to build endless [AlF6]3-∞ chains, further stacking with each other in a highly cross-linked way to establish the rigid network of the KCaAl2F9 host. Benefiting from the rigid microenvironment, the developed phosphor not only shows a narrow-band deep-blue emission with a full width at half maximum of 45 nm and a high color purity of 92%, but it also exhibits the superior thermal stability with an emission loss of only 10% at 423 K, demonstrating its application potential in bridging the deep-blue spectral cavity toward sunlight-like full-spectrum lighting. In addition, the concentration/temperature quenching behaviors of KCaAl2F9:Eu2+ phosphor are systematically investigated. By revealing the specific structure-property relationship of tungsten bronze-type KCaAl2F9:Eu2+ phosphor, the present study provides a significant guide for identifying the novel narrow-band deep-blue-emitting component applicable to full-spectrum warm white light-emitting diode devices.
A Novel Bright Cyan Emitting Phosphor of Eu2+ Activated Ba6BO3Cl9 with Robust Thermal Stability for Full-Spectrum WLED Applications

Shengjian Jiao,Ran Pang,Jiutian Wang,Tao Tan,Chengyu Li,Hongjie Zhang

DOI: https://doi.org/10.1039/d3qi00015j

IF: 7.779

2023-01-01

Inorganic Chemistry Frontiers

Abstract:A novel bright cyan-emitting phosphor of Eu2+-activated Ba6BO3Cl9with robust thermal stability has been reported. It can efficiently compensate for the lack of cyan emission and also contribute to the improvement inRaof white LED devices.
Discovery of a novel rare-earth free narrow-band blue-emitting phosphor Y3Al2Ga3O12:Bi3+ with strong NUV excitation for LCD LED backlights

Chibin Zheng,Puxian Xiong,Mingying Peng,Huailu Liu

DOI: https://doi.org/10.1039/d0tc02720k

IF: 6.4

2020-01-01

Journal of Materials Chemistry C

Abstract:Herein, an emerging no-rare earth doped and narrow-band blue-emitting phosphor of Y3Al2Ga3O12: Bi3+ with narrow-band blue emission peaking at 410 nm with FWHM of 39 nm, is pioneeringly developed via selective excitation.
A Narrow-Band Blue Emitting Phosphor Ca8Mg7Si9N22:Eu2+ for Pc-Leds

Chao Li,Xiao-Ming Wang,Feng-Feng Chi,Zu-Pei Yang,Huan Jiao

DOI: https://doi.org/10.1039/c9tc00855a

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:Ca8Mg7Si9N22 crystallizes in a tetragonal space group P42/nmc (No. 137) with a unit cell of a = 7.3271(11) Å and c = 10.336(2) Å. Ca8Mg7Si9N22:Eu2+ shows a narrow-band blue emission peaking at 400 nm with an intriguing bandwidth ∼34 nm and shows remarkably high thermal quenching resistance, maintaining 92% photoluminescence emission intensity at 420 K and 75% at 700 K of that measured at room temperature.
Ultra-narrow-band blue-emitting K2SrBa(PO4)2:Eu2+ phosphor with superior efficiency and thermal stability

Tingxuan Yang,Zhihong Ma,Saifang Huang,Ting Zhang,Kai Zhao,Li Yin,Qinfen Gu,Peng Cao

DOI: https://doi.org/10.1016/j.jallcom.2021.162066

IF: 6.2

2022-02-01

Journal of Alloys and Compounds

Abstract:The design of phosphors simultaneously having excellent quantum efficiency, ultra-narrow emission band and zero thermal quenching is yet a big challenge. Herein, we report a blue-emitting K2SrBa(PO4)2:xEu2+ phosphor with ultra-narrow emission peaked at 425 nm with a full width at half maximum (FWHM) of 37 nm (2088 cm−1), high color purity (0.93), together with superior thermal stability and quantum efficiency. This phosphor displays an external quantum efficiency (EQE) of 75.3%, exceeding those of blue phosphors reported thus far. It also has excellent thermal stability showing near zero thermal quenching up to 300 °C, retaining 102%, 100% and 96% of its initial integrated emission intensity at 75, 200 and 300 °C, respectively. Rietveld refinements and density functional theory (DFT) calculations reveal that the Eu2+ ions preferentially occupy the Sr/Ba sites, rather than the K sites, of the host structure, contributing to the superior photoluminescence properties. The as-developed phosphors can be potentially applied in the phosphor-converted white light emitting diodes (pc-WLEDs) for applications such as high-power lighting and backlight display.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Air Stable and Highly Efficient Bi3+-doped Cs2SnCl6 for Blue Light-Emitting Diodes.

Yue Yao,Si-Wei Zhang,Zijian Liu,Chun-Yun Wang,Ping Liu,Lan Ma,Guodan Wei,Feiyu Kang

DOI: https://doi.org/10.1039/d1ra03622j

IF: 4.036

2021-01-01

RSC Advances

Abstract:Cs2SnCl6 perovskite has recently attracted attention as a promising optoelectronic material owing to its better stability and reduced toxicity than its lead counterparts. However, its luminescence performance hardly satisfies the requirements. Hence, a series of Bi3+-doped Cs2SnCl6 (Cs2SnCl6:Bi3+) with enhanced luminescence were synthesized by a solution-phase route. The results show that the initial concentration of Sn2+ can adjust the nucleation density and the quality of the crystal nucleus growth, which will affect the Bi3+ doping amount, crystal morphology, and photophysical properties of Cs2SnCl6:Bi3+. Cs2SnCl6:Bi3+ shows excellent stability in the atmosphere with a photoluminescence (PL) of around 456 nm and a photoluminescence quantum yield (PLQY) of 31%. The luminescence performance results from [BiSn4+ 3+ + VCl] defects caused by the Bi3+ doping. The blue LED based on the Cs2SnCl6:Bi3+ phosphor exhibits a long life of about 120 h and a Commission Internationale de L'Eclairage (CIE) color coordinates of (0.14, 0.11). This work demonstrates a strategy for Bi-doped perovskites with good stability. This investigation will facilitate the development of Cs2SnCl6:Bi3+ for blue LED applications.
A novel wide-excitation and narrow-band blue-emitting phosphor with hafnium silicon multiple rings structure for photoluminescence and cathodoluminescence

Qi Wei,Jianyan Ding,Yuhua Wang

DOI: https://doi.org/10.1016/j.jallcom.2020.154825

IF: 6.2

2020-08-01

Journal of Alloys and Compounds

Abstract:In order to obtain white light, based on near-ultraviolet (n-UV) chip needs highly efficient red, green and blue phosphor. The popular commercial blue phosphor is BaMgAl10O17:Eu2+ (BAM:Eu2+). However, BAM:Eu2+ is unstable at high temperature and the excitation band of BAM:Eu2+ couldn't match well with n-UV (380–420 nm) chips. Therefore, the development of new blue phosphor is important. In our work, a novel Eu2+ doped Na2HfSi2O7 phosphor is successfully synthesized through the high-temperature solid-state method. Na2HfSi2O7:Eu2+ shows a strong wide absorption band peaking at 397 nm, covering the spectral scope from 250 to 450 nm on account of the 4f7 → 4f65 d1 transitions of Eu2+ ions. Under the optical excitation, The phosphor exhibits an asymmetric narrow-band emission centered at 460 nm with FWHM of 54 nm. Owing to the characteristics of wide-excitation and narrow-band emission, Na2HfSi2O7:Eu2+ is a promising candidate for n-UV WLED.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Unusual red luminescence and super thermal stability of a new narrow-band emission phosphor for backlight display application

Qiu Zong,Dan Zhao,Rui-Juan Zhang,Qing-Xia Yao,Lei Jia,Meng-Han Yu

DOI: https://doi.org/10.1039/d3tc03555g

IF: 6.4

2024-01-01

Journal of Materials Chemistry C

Abstract:This work reports the design and successful synthesis of an Eu 2+ -doped narrow-band red-emitting borate phosphor, and proposes a defect engineering approach for enhancing the thermal quenching resistance of a phosphor.

materials science, multidisciplinary,physics, applied
Thermal Quenching Properties Of Narrow-Band Blue-Emitting Mbe2(Po4)(2):Eu2+(M = Ca, Sr) Phosphors Towards Backlight Display Applications

Tao Hu,Yan Gao,Xiaohong Ji,Zhiguo Xia,Qinyuan Zhang

DOI: https://doi.org/10.1039/d0qi00467g

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:Discovering new phosphors with narrow-band emission is critical for white light emitting diodes (LEDs) in liquid-crystal displays (LCDs). Herein, near-ultraviolet (UV) excitable narrow-band blue-emitting MBe2(PO4)(2):Eu2+(M = Ca, Sr) phosphors were successfully designed, exhibiting an extremely narrow full width at half-maximum of similar to 26-27 nm, high color purity of similar to 99.1%, small Stokes shift of similar to 1500 cm(-1), desirable photoluminescence quantum efficiency of similar to 63.4%, and zero thermal quenching even at temperatures up to similar to 300 degrees C. The small Stokes shift and narrow emission profile are fundamentally caused by the greatly suppressed structural relaxation benefiting from the rigid and ordered connected [BeO4] and [PO4] tetrahedra network. Meanwhile, the unprecedented thermal emission behavior is ascribed to the suppression of thermally activated photoionization and the non-radiative pathway from the cross-point of the 5d excited state to the 4f ground state of Eu2+. A wide color gamut reaching up to 88.6% NTSC is realized, demonstrating the validity of MBe2(PO4)(2):Eu(2+)in LED backlights for LCDs. The present studies encourage researchers to identify hitherto undiscovered narrow-band phosphorsviaselecting a stiff and ordered host with confined sites for doped rare earth activators.
Sr3Y(BO3)3:Bi3+ Phosphor with Excellent Thermal Stability and Color Tunability for Near-Ultraviolet White-Light LEDs

Sheng Wu,Puxian Xiong,Xiaoqi Liu,Yubin Fu,Quan Liu,Yang Chao,Quan Dong,Yuanyuan Li,Weiwei Chen,Yan Chen,Zhijun Ma,Mingying Peng

DOI: https://doi.org/10.1039/d0tc05960a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Bismuth activated blue-emitting phosphor Sr3Y(BO3)3:Bi3+ for near-ultraviolet white-light LEDs.

Novel Narrow-Band Blue-Emitting Cs3Zn6B9O21:Bi3+phosphor with Superior Thermal Stability

Novel narrow-band blue-emitting Cs<sub>3</sub>Zn<sub>6</sub>B<sub>9</sub>O<sub>21</sub>:Bi<sup>3+</sup> phosphor with superior thermal stability

A novel blue emitting phosphor Ca1- ySryScBO4:Bi3+ with zero-thermal quenching for multi-scenario application

Structure and Luminescence Properties of Bi3+ Activated Ca12Al14O32Cl2 Phosphors

Superior Thermally-Stable Narrow-Band Green Emitter from Mn2+-doped Zero Thermal Expansion (ZTE) Material

Novel Highly efficient Bi3+-activated phosphor for warm WLED

A Highly Efficient Narrow-Band Blue Phosphor of Bi3+-activated Cubic Borate Ba3Lu2B6O15 Towards Backlight Display Applications

A Novel Narrow-Band Blue-Emitting Phosphor with High Efficiency and Thermal Stability for WLEDs and FEDs

Air stable and highly efficient Bi 3+ -doped Cs 2 SnCl 6 for blue light-emitting diodes

Preparation and Luminescence Properties of Broadband Orange-Emitting Persistent ScBaZn3GaO7:Bi3+ Phosphor

Ultra-narrow band blue-emitting Ba5SiO4Cl6: Eu2+ phosphors with excellent thermal stability

Narrow-Band Deep-Blue Emission and Superior Thermal Stability of Fluoroaluminate Phosphor Based on Tungsten Bronze-Type Mineral Structure

A Novel Bright Cyan Emitting Phosphor of Eu2+ Activated Ba6BO3Cl9 with Robust Thermal Stability for Full-Spectrum WLED Applications

Discovery of a novel rare-earth free narrow-band blue-emitting phosphor Y<sub>3</sub>Al<sub>2</sub>Ga<sub>3</sub>O<sub>12</sub>:Bi<sup>3+</sup> with strong NUV excitation for LCD LED backlights

A Narrow-Band Blue Emitting Phosphor Ca8Mg7Si9N22:Eu2+ for Pc-Leds

Ultra-narrow-band blue-emitting K2SrBa(PO4)2:Eu2+ phosphor with superior efficiency and thermal stability

Air Stable and Highly Efficient Bi3+-doped Cs2SnCl6 for Blue Light-Emitting Diodes.

A novel wide-excitation and narrow-band blue-emitting phosphor with hafnium silicon multiple rings structure for photoluminescence and cathodoluminescence

Unusual red luminescence and super thermal stability of a new narrow-band emission phosphor for backlight display application

Thermal Quenching Properties Of Narrow-Band Blue-Emitting Mbe2(Po4)(2):Eu2+(M = Ca, Sr) Phosphors Towards Backlight Display Applications

Sr3Y(BO3)3:Bi3+ Phosphor with Excellent Thermal Stability and Color Tunability for Near-Ultraviolet White-Light LEDs