Abstract:Single-phase Li0.5-0.5xZnxFe2.5-0.5xO4 (where x=0.0, 0.2, 0.3, 0.4, 0.5 and 0.8) nanofibers with diameters of 50 similar to 100 nm were successfully fabricated via electrospinning technique in combination with subsequent heat treatment using polyvinylpyrrolidone, nickel nitrate, zinc nitrate and ferric nitrate as principal raw material. The thermal decomposition process of as-spun precursor nanofibers and the influences of the calcination temperature and chemical composition on the crystal structure, micromorphology and magnetic properties of the prepared nanofiber samples were investigated by means of thermogravimetric and differential thermal analysis, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer. The results indicate that the pure crystalline LiZn ferrite nanofibers are basically formed when the precursor nanofibers are calcined at 350 degrees C for 2 h. As the calcination temperature increases from 350 to 600 degrees C, the average grain size of Li0.35Zn0.3Fe2.35O4 nanofibers ranges from 13.0 to 47.5 nm and the micromorphology evolves toward a chain-like structrue. The saturation magnetization of the samples monotonously increases from 39.7 to 84.5 A.m(2).kg(-1), while the coercivity increases initially, reaches a maximun value of 12.6 kA.m(-1) at 550 C and then decreases, which reveals that the magnetic single-domain critical size of Li0.35Zn0.3Fe2.35O4 nanofibers may be around 35 nm. The lattice constant of as-prepared Li0.5-0.5xZnxFe2.5-0.5xO4 nanofibers calcined at 500 degrees C for 2 h exhibits an almost linear increase with increasing x and complies with Vegard's law. The coercivity of these nanofiber samples gradually decreases from 17.1 kA.m(-1) for x=0.0 to 2.4 kA.m(-1) for x=0.8, and the saturation magnetization firstly increases to 74.7 A.m(2).kg(-1) with the value of x up to 0.3 and then decreases beyond this limit. Compared to the nanoparticle counterparts prepared under similar conditions, the LiZn ferrite nanofibers have a relatively high coercivity due to their large shape anisotropy. These LiZn ferrite nanofibers have potential application in many fields such as nanoelectronic devices, sensitive devices, microwave absorbers, and biomedicine.

Realizing Single-Crystalline Vertically-Oriented and High-Density Electrospun Nanofibril Bundles by Controlled Postcalcination

Carbon Nanotubes Facilitate Silk Hierarchical Assembly by Dry Drawing

Synthesis of Ultrafine Green-Emitting BaCO3 Nanowires with 18.5 Nm-Diameter by CO2 Vapor-Assisted Electrospinning

4 Nm ZnO Nanocrystals Fabrication Through Electron Beam Irradiation on the Surface of a ZnO Nanoneedle Formed by Thermal Annealing

Preparation of YIG Single Crystal Nanofibers Via an Electrospinning Technique

α-Calcium Sulfate Hemihydrate Nanorods Synthesis: A Method for Nanoparticle Preparation by Mesocrystallization

LaMnO3 and La0.875Sr0.125MnO3 Nanofibers via Electrospinning

The Combination of Colloid-Controlled Heterogeneous Nucleation and Polymer-Controlled Crystallization: Facile Synthesis of Separated, Uniform High-Aspect-Ratio Single-Crystalline BaCrO4 Nanofibers

Fabrication of Cuprate Superconducting La1.85sr0.15cuo4 Nanofibers by Electrospinning and Subsequent Calcination in Oxygen

Single Crystallization of Olivine Lithium Phosphate Nanowires Using Oriented Attachments

Width-controlled M-type hexagonal strontium ferrite (SrFe12O19) nanoribbons with high saturation magnetization and superior coercivity synthesized by electrospinning

Electrospinning Preparation, Structural and Magnetic Properties of Li0.5-0.5xznxfe2.5-0.5xo4 Nanofibers

Microstructure and Intrinsic Strain of Nanocrystals in Ferroelectric (Na,K)NbO3 Nanofibers

Design and electrospinning synthesis of SrF2:Er3+/Yb3+ unidimensional nanostructural materials with tunable upconverting fluorescence

Synthesis and optical properties of chromium-doped spinel hollow nanofibers by single-nozzle electrospinning

Nanostructured LiCoO2 and LiMn2O4 fibers fabricated by a high frequency electrospinning

High-resolution cryo-electron microscopy structure of block copolymer nanofibres with a crystalline core

Synthesis of one-dimensional neodymium-iron-boron-oxides

Synthesis and Photoluminescence of Needle-Shaped 3c–sic Nanowires on the Substrate of PAN Carbon Fiber

Long Bundles of Aligned Carbon Nanofibers Obtained by Vertical Floating Catalyst Method

Synthesis and Field-Emission Behavior of Highly Oriented Boron Carbonitride Nanofibers