Abstract:Dimethyl ether (DME) is a highly reactive diesel substitute that can be used as a pilot fuel to ignite low- reactivity methane (CH4) in heavy-duty engines. To optimize the efficiency and emissions of CH4/DME dual-fuel engines, it is crucial to study the fundamental combustion characteristics of DME mixed with methane. This study focuses on the influence of CH4 addition on the low-temperature oxidation (LTO) preparation stage and the thermal ignition (TI) preparation stage of DME in the two-stage ignition process, as these two stages respectively control the ignition delay of the first and second stages. The comparison is made between pure DME and a 50% CH4 and 50% DME blended fuel, operating under thermodynamic conditions representing the engine in- cylinder environment at 30 atm pressure, 650K temperature, and a stoichiometric equivalence ratio. The results show that the addition of methane hardly affects the control mechanism of the two-stage ignition of DME. Specifically, the LTO preparation stage is still promoted by the increase in OH radicals in the DME’s low-temperature oxygenation pathways to form KET, and the second stage is still controlled by the H2O2 loop mechanism. The kinetic analysis also reveals that methane addition can compete for some of the OH radicals in the LTO preparation stage, which has a suppressing effect on ignition. However, in the TI preparation stage, methane can promote the loop reaction of OH→HO2→H2O2→OH and promote ignition. For the operating conditions studied here, although methane consumes a total of 7.24% prior to thermal ignition, it only consumes 0.63% of the total amount in the LTO preparation stage and 1.81% of the total amount in the TI preparation stage. This indicates that methane is mainly consumed in the LTO stage, accounting for 65% of the total methane consumption amount. It can be concluded that the kinetic effect of methane has a relatively small impact on the ignition delay of the DME, at least for the conditions investigated here. In other words, the dilution and thermal effects caused by adding methane are the main reasons for the prolonged time of LTO/TI preparation. Overall, more fundamental research is warranted to understand the role of methane in the two-stage ignition process of DME, which could facilitate the development of CH4/DME dual-fuel engines.

Combustion and Emission Characteristics of an Ultra-Lean Burn Gasoline Engine with Dimethyl Ether Auto-Ignition

Multi-point Micro-Flame Ignited Hybrid Lean-Burn Combustion of Gasoline with Direct Injection Dimethyl Ether

Effect of direct injection dimethyl ether on the micro-flame ignited (MFI) hybrid combustion characteristics of an optical gasoline engine at ultra-lean conditions

Effect of Direct Injection Dimethyl Ether on the Micro-Flame Ignited (MFI) Hybrid Combustion and Emission Characteristics of a 4-Stroke Gasoline Engine

Impacts of Dimethyl Ether Enrichment and Various Injection Strategies on Combustion and Emissions of Direct Injection Gasoline Engines in the Lean-Burn Condition

Combustion and Emissions Characteristics of a S.I. Engine Fueled with Gasoline-Dme Blends under Different Spark Timings

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Investigation on Performance of a Spark-Ignition Engine Fueled with Dimethyl Ether and Gasoline Mixtures under Idle and Stoichiometric Conditions

Role of Dimethyl Ether in Incipient Soot Formation in Premixed Ethylene Flames

Experimental Study of Stratified Lean Burn Characteristics on a Dual Injection Gasoline Engine

Study on Micro-Flame Ignited (MFI) Hybrid Combustion Characteristics of a Dual-Fuel Optical Engine at Different Lambdas

Combustion and Emission Characteristics of a Homogeneous Charge Compression Ignition Engine

Investigation of combustion and emissions of an SI engine with ethanol port injection and gasoline direct injection under lean burn conditions

Experimental Study on Combustion and Emission Characteristics of a Lean Burn Engine Fueled with Methanol/Gasoline

Investigation into Engine Performance of a Hydrogen-Dimethyl Ether Spark-Ignition Engine under Various Dimethyl Ether Fractions

Study of Combustion Characteristics of a Compression Ignition Engine Fuelled with Dimethyl Ether

COMBUSTION AND EMISSION CHARACTERISTICS OF A LEAN BURN NATURAL GAS ENGINE

Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether

Experimental Investigation on Injection and Combustion of Dimethyl Ether Fueled Diesel Engine

Effects of Second Injection Timing on Combustion Characteristics of the Spark Ignition Direct Injection Gasoline Engines with Dimethyl Ether Enrichment in the Intake Port