Abstract:Dimethyl Ether (DME) is an oxygenated fuel that could favour the transition of the heavy-duty transportation sector to carbon neutrality thanks to its similarities in terms of thermophysical properties with diesel fuel, which will facilitate the retrofitting of existing architectures, and the possibility to achieve good trade-offs between NO x emissions, soot formation and overall combustion efficiency. The possibility of producing it from a multitude of carbon–neutral sources and the low hydrogen-to-carbon ratio would allow for an overall lower CO2 output, making an attractive option in limiting the global warming impact of the heavy-duty transportation sector. In the present work, a numerical analysis of the combustion process of DME is carried out. First, the numerical setup is validated against experimental data available for a constant volume vessel with an initial density of 14.8 kg/m 3 , discussing the capabilities of a chemistry-based combustion model using tabulated kinetics of homogeneous reactors: the Tabulated Well Mixed (TWM) model. Ignition delay times (IDT) are compared for a wide range of temperatures, from 750 K to 1100 K, and oxygen concentrations, from 15% to 21%. The same setup is then applied in the simulation of a heavy-duty internal combustion engine (ICE). A first validation was done to assess the performance of the numerical methodology in a traditional Mixing Controlled Compression Ignition (MCCI) scenario. Then, two other points were simulated: an MCCI condition with 35% of EGR and a Late-Premixed Charge Compression Ignition (L-PCCI) one, with 35% of EGR and an SOI e of 4 CAD aTDC. Local temperature distributions were compared, analyzing the effect of these technologies in NO x emission mitigation and their impact on gross indicated efficiency ( ηg ), showing the advantages that using DME can have on a real-world application.

Combustion and emission characteristics of dimethyl ether/gasoline DFSI engine under different excess air coefficients

Simulation on Diesel/DME Mixed Injection System

Investigation On Combustion And Emissions Of Dme/Gasoline Mixtures In A Spark-Ignition Engine

Combustion and performance of heavy-duty diesel engines fuelled with dimethyl ether

Study on Combustion and Emission Characteristics of a Vehicle Engine Fuelled with Dimethyl Ether

Impacts of Dimethyl Ether Enrichment and Various Injection Strategies on Combustion and Emissions of Direct Injection Gasoline Engines in the Lean-Burn Condition

Combustion and Emissions Characteristics of a S.I. Engine Fueled with Gasoline-Dme Blends under Different Spark Timings

The Effects of Diesel-DME Blends on Performance and Emissions of DI Diesel Engine

Combustion and Emission Characteristics of A Turbocharged Diesel Engine Fuelled with Dimethyl Ether

Study of Combustion Characteristics of a Compression Ignition Engine Fuelled with Dimethyl Ether

Combustion and Emission Characteristics of an Ultra-Lean Burn Gasoline Engine with Dimethyl Ether Auto-Ignition

Investigation on Performance of a Spark-Ignition Engine Fueled with Dimethyl Ether and Gasoline Mixtures under Idle and Stoichiometric Conditions

Regulated And Nonregulated Emissions From A Dimethyl Ether Powered Compression Ignition Engine

Study of Combustion and Emission Characteristics of Turbocharged Diesel Engine Fuelled with Dimethylether

Investigation on Emission Characteristics of A Compression Ignition Engine with Oxygenated Fuels and Exhaust Gas Recirculation

Particulate number and size distribution of dimethyl ether/gasoline combined injection spark ignition engines at medium engine speed and load

Investigation into Engine Performance of a Hydrogen-Dimethyl Ether Spark-Ignition Engine under Various Dimethyl Ether Fractions

Study on the performance and emissions of a compression ignition engine fuelled with dimethyl ether

Investigation on the performance of a spark-ignited ethanol engine with DME enrichment

Numerical investigation on the use of Dimethyl Ether (DME) as an alternative fuel for compression-ignition engines

An Investigation on Combustion and Exhaust Emissions of Direct Injection Diesel Engine Fuelled with Dimethyl Ether