Combustion and Emission Characteristics of Methanol–Diesel Dual Fuel Engine at Different Altitudes
Zhongcheng Wang,Zhu Jie,Xiaoyu Liu
DOI: https://doi.org/10.3390/jmse12122210
IF: 2.744
2024-12-03
Journal of Marine Science and Engineering
Abstract:Currently, in the two technological approaches for using diesel pilot injection to ignite methanol and partially substituting diesel fuel with methanol, neither can fully achieve carbon neutrality in the context of internal combustion engines. Compression-ignition direct-injection methanol marine engines exhibit significant application potential because of their superior fuel economy and lower carbon emissions. However, the low cetane number of methanol, coupled with its high ignition temperature and latent heat of vaporization, poses challenges, especially amidst increasingly stringent marine emission regulations. It is imperative to comprehensively explore the impacts of the engine geometry, intake boundary conditions, and injection strategies on the engine performance. This paper first investigates the influence of the compression ratio on the engine performance, subsequently analyzes the effects of intake conditions on methanol ignition characteristics, and finally compares the combustion characteristics of the engine under different fuel injection timings. When the compression ratio is set at 13.5, only an injection timing of −30 °CA can initiate methanol compression ignition, but the combustion is not ideal. For compression ratios of 15.5 and 17.5, all the injection timings studied can ignite methanol. Reasonable increases in the intake pressure and intake temperature are beneficial for methanol compression ignition. However, when the intake temperature rises from 400 K to 500 K, a decrease in the thermal efficiency is observed. Particularly, at an injection timing of −30 °CA, both the peak cylinder pressure and peak cylinder temperature are higher, the ignition occurs earlier, the combustion process shifts forward, and the combustion efficiency and indicated thermal efficiency are at higher levels. Furthermore, the overall emissions of NOX, HC, and CO are relatively low. Therefore, selecting an appropriate injection timing is crucial to facilitate the compression ignition and combustion of methanol under low-load conditions.
oceanography,engineering, marine, ocean