Abstract:Selective catalytic reduction (SCR) of NO x with NH3 has been widely used for the removal of NO x . Because of the inevitable disadvantages of conventional V2O5-WO3(MoO3)/TiO2 catalysts such as poor low-temperature SCR activity and toxicity of vanadium, as well as the high-cost and over-strong NH3 adsorption of zeolite catalysts, the development of efficient and non-toxic metal oxide SCR catalysts is highly demanded. Previously, we have developed an environmentally-benign CeO2-SiO2 mixed-oxide SCR catalyst (CeSi2), which exhibited superior SO2 resistance ability. However, the low-temperature SCR activity on CeSi2 was not that satisfactory. In this work, we proposed a new strategy of Mo doping to improve the low-temperature SCR activity on CeSi2, which was very crucial for its practical application. By a simple co-precipitation method, a homogenous Mo-Ce-Si mixed-oxide catalyst was prepared. The Mo doping could significantly enhance the NH3-SCR activity on CeSi2 below 250 °C, and the optimal catalyst was Mo0.1CeSi2, which could achieve 80% NO x conversion at 200 °C. Mo0.1CeSi2 also exhibited superior N2 selectivity and resistance to SO2/H2O poisoning. Via a series of characterizations, it was found that the redox properties and surface acidity on CeSi2 by Mo doping, which accounted for the enhanced low-temperature NH3-SCR activity on Mo0.1CeSi2. The reaction mechanism on Mo0.1CeSi2 was also fully revealed by in situ DRIFTS experiments. This work provided a new insight for the development of efficient low-temperature SCR catalysts with superior SO2 resistance ability.

Mo-Doped Ce/GE Catalyst for Selective Catalytic Reduction of NOx by NH3

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Influence of different preparation methods on the activity of Ce and Mo co-doped ZSM-5 catalysts for the selective catalytic reduction of NOx by NH3

Molybdenum oxide as an efficient promoter to enhance the NH3-SCR performance of CeO2-SiO2 catalyst for NO removal

Novel MoO3/CeO2–ZrO2 Catalyst for the Selective Catalytic Reduction of NOx by NH3

Activity and Characterization of Ce–Mo–Ti Mixed Oxide Catalysts Prepared by a Homogeneous Precipitation Method for Selective Catalytic Reduction of NO with NH3

Effect of metal elements doping on the CePO4 catalysts for selective catalytic reduction of NO with NH3

Hexavalent Metal Cations Doped into Ceria Inducing the Formation of Binuclear Sites Ce3+–O–Ce3+ to Boost the NH3-SCR Reaction

Modification of CrCeOx with Mo: Improved SO2 resistance and N2 selectivity for NH3-SCR at medium-low temperature

Optimized local geometry and electronic structure of MoO 3 /CeO 2 catalyst by adding copper cations for boosted nitrogen oxide reduction performance

Superior Ce–Nb–Ti oxide catalysts for selective catalytic reduction of NO with NH3

Optimized Local Geometry and Electronic Structure of MoO3/CeO2 Catalyst by Adding Copper Cations for Boosted Nitrogen Oxide Reduction Performance

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia

Ge, Mn-doped CeO2–WO3 Catalysts for NH3–SCR of NOx: Effects of SO2 and H2 Regeneration

Insight into the enhanced tolerance of Mo-doped CeO2-Nb2O5/TiO2 catalyst towards the combined effect of K2O, H2O and SO2 in NH3-SCR

Three-dimensionally ordered macroporous Ce-W-Nb oxide catalysts for selective catalytic reduction of NO with NH3

The Superior Performance of Sol–Gel Made Ce–O–P Catalyst for Selective Catalytic Reduction of NO with NH3

Ce-Sn Binary Oxide Catalyst for the Selective Catalytic Reduction of NOx by NH3

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.