Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Effect of Surface Protonation on Device Performance and Dye Stability of Dye-sensitized TiO2 Solar Cell

Effect of Surface Protonation of Tio2 on Charge Recombination and Conduction Band Edge Movement in Dye-Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Significant Efficiency Improvement of the Black Dye-Sensitized Solar Cell Through Protonation of Tio2 Films

Resonant Raman study of dye instability in dye-sensitized TiO 2 system: The effect of surface states

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Enhanced performance of dye-sensitized solar cell via surface modification of mesoporous TiO2 photoanode with electrodeposited thin TiO2 layer

Effect of Ultra-Thin ZnO Coating Layer on the Device Performance of TiO2 Dye Sensitized Solar Cell

Enhanced Photosensitization of Nanocrystalline Tio2 Film with A Sulfonic Sensitizer by Surface Protonation

Dye-Sensitized Solar Cells with Modified Tio2 Surface Chemical States: the Role of Ti3+

Preparation of Tio2 Photoelectrodes for Dye-Sensitized Solar Cell by Crm

Influence of TiCl 4 Treatment on Performance of Dye-Sensitized Solar Cell Assembled with Nano-Tio 2 Coating Deposited by Vacuum Cold Spraying

Modification Of Tio2 Electrode With A Series Of Alkaline-Earth Carbonates: Performance Improvement Of Quasi-Solid-State Dye-Sensitized Solar Cells

Surface Treatment for Effective Dye Adsorption on Nanocrystalline Tio2

Optimization of Photoelectrode Introduced to Dye-Sensitized Solar Cells by Anodic Oxidative Hydrolysis

Study on Interfacial Characteristics of TiO2 Electrode Coated by Strontium Carbonate in Dye Sensitized Solar Cells

Photoelectrochemical Analysis of the Dyed Tio2/Electrolyte Interface in Long-Term Stability of Dye-Sensitized Solar Cells

Improving the Electron Transport Performance of TiO2 Film by Regulating TiCl4 Post‐Treatment for High‐Efficiency Carbon‐Based Perovskite Solar Cells

Alumina Post-Modification After Dye-Sensitization: Effect On The Performance Of Quasi-Solid State Solar Cells

Post-modification Using Aluminum Isopropoxide after Dye-Sensitization for Improved Performance and Stability of Quasi-Solid-state Solar Cells

Electrode Interface Characteristics of TiO2 Solar Cells with Surface Modification