Abstract:Discharging hexavalent chromium (Cr(VI))-containing wastewater has become a critical environmental and ecological concern. Coffee grounds biochar (CGB), rich in oxygen-containing functional groups, can reduce Cr(VI) to the less toxic trivalent chromium (Cr(III)) without secondary contamination. This study developed a composite adsorbent by incorporating sodium alginate (SA) into CGB, exploiting their synergistic adsorption and ion exchange reduction effects for efficient Cr(VI) removal. The maximum adsorption capacity of SACGB, fitted by the Langmuir isotherm model, was 30.66 ± 1.89 mg/g. Under optimal conditions (pH = 2, SA: CGB mass ratio = 3:2, Cr(VI) concentration = 50 mg/L), SACGB achieved 99.79 % Cr(VI) removal from synthetic wastewater. Significant Cr(VI) reduction to Cr(III) (58.97 % removal) occurred at an SA:CGB ratio of 1:1. The adsorption mechanism involved hydrogen bonding, electrostatic interactions, and ion exchange reduction. Removal of Cr(VI) retained 93 % removal despite interference from coexisting Cu(II), Zn(II), and Ni(II) ions, and the ions promoted Cr(VI) adsorption onto SACGB. In actual wastewater, SACGB exhibited excellent Cr(VI) removal (99.26 %), meeting the Chinese industrial effluent discharge standard (0.2 mg/L). After 6 recycling cycles, SACGB demonstrated stable removal performance and contained no biotoxic components. The cost of preparation and adsorption process was analyzed and also compared with earlier studies to evaluate and highlight the economic feasibility of the adsorbent for a truly green removal method. This study highlights SACGB as an economical and efficient adsorbent with practical application potential for Cr(VI) removal from industrial wastewater.

Al‐Li Alloy Chemical Milling Waste Solution Synthesis of Γ‐alooh Bundles for Cr(VI) Rapid Adsorption

Preparation of composites with MgAl-LDH-modified commercial activated carbon for the quick removal of Cr(VI) from aqueous solutions

Enhanced removal of hexavalent chromium from aqueous solution by functional polymer-wrapped gamma-alumina composite adsorbent

Adsorption of Cr(VI) on calcined MgAl-layered double hydroxides and recycling of spent adsorbents for the removal of organic dyes

Removal of hexavalent chromium from aqueous solution using low-cost magnetic microspheres derived from alkali-activated iron-rich copper slag

Green desorption combined with peptization technology for disposing of Cr(VI)-V(V)-containing hazardous aluminum waste to prepare high-valued pseudo-boehmite

In Situ Synthesis of Γ-Alooh and Synchronous Adsorption Separation of V(V) from Highly Concentrated Cr(VI) Multiplex Complex Solutions

Efficient removal of hexavalent chromium from wastewater using a novel sodium alginate-biochar composite adsorbent

Enhancing the Immobilization of Hexavalent Chromium by the Interlayer Anion Adsorption of the Brucite-Transformed LDH in the Presence of Aluminum Ions

Soaked Al powder for efficient reduction of hexavalent chromium in neutral solution

Surface Modified Leaves with High Efficiency for the Removal of Aqueous Cr (VI)

Surface modified zero-valent aluminum for Cr(VI) removal at neutral pH

Preparation of quaternary amine-grafted organosolv lignin biosorbent and its application in the treatment of hexavalent chromium polluted water

High Adsorption Capacity and the Key Role of Carbonate Groups for Heavy Metal Ion Removal by Basic Aluminum Carbonate Porous Nanospheres

Enhanced Adsorption of Chromium by Stabilized Ca/Al–Fe Layered Double Hydroxide Decorated with Ferric Nanoparticles

Efficient removal of chromium(VI) ions by hexagonal nanosheets of CoAl-MoS4 layered double hydroxide

Enhanced Cr(VI) removal via CPBr-modified MIL-88A@amine-functionalized GO: synthesis, performance, and mechanism

High-capacity Amino-Functionalized Walnut Shell for Efficient Removal of Toxic Hexavalent Chromium Ions in Batch and Column Mode

Ultrasonic-assisted preparation of interlaced layered hydrotalcite (U–Fe/Al-LDH) for high-efficiency removal of Cr(VI): Enhancing adsorption-coupled reduction capacity and stability

A novel and green strategy for efficient removing Cr(VI) by modified kaolinite-rich coal gangue

Fabrication of Carbon–Alumina Composites via Catalytic Pyrolysis of Pine Sawdust on Aluminum Dross for Cr(VI) Removal